Recent content by Ac3200user

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. A

    AX86U Check my settings please

    Although an old post, these settings helped me a lot!!! Thanks. Wifi speed improved from a max of 300mb to 650mb. Thanks again. Should be a sticky post!
  2. A

    2.5G Wan not working (Asus RT-AX86U)

    You answer, was the solution. I was tricked by an explanation on the Asus-website, that stated that i HAD to turn dual-wan on. After switching it off, and selecting the 2.5g-Wan port, it all works. Thanks!
  3. A

    2.5G Wan not working (Asus RT-AX86U)

    hi! Question: i'm not getting any internet from my 2.5G wan-port. Hoping you can help. Here's my setup: I'm on a fiber-connection (2GB/s), with a Huawei ONT (fiber to ethernet converter) connected to my Asus RT-AX86U using the latest Merlin firmware. VLAN is set correct, Huawei has a 10g...
  4. A

    AX86u (Merlin 388.1) suddenly a total mess. Any help?

    True. But my thoughts were: If the settings caused the issue, i would know soon after the upload of the settings. And if they did: i would start from scratch. But....i have SO much settings, passwords, VPN, names connected to almost 100 mac-adresses, etc. Not much fun to enter all those...
  5. A

    AX86u (Merlin 388.1) suddenly a total mess. Any help?

    Thanks all. Did factory reset (WPS + Power on, etc.) Formatted jffs. Upgraded to latest Alpha Restored settings. Working again. Thank you all again.
  6. A

    AX86u (Merlin 388.1) suddenly a total mess. Any help?

    Thanks for the advice. What alpha release did you use, and where to find it? And how to wipe the jffs?
  7. A

    AX86u (Merlin 388.1) suddenly a total mess. Any help?

    Hi all, My RT-AX86U suddenly, for no particular reason stopped doing what it should do: provide internet to my home. Wifi dropped, came back. But: no internet. WAN is connected and getting internet, but no traffic comes through. Routers WebGUI is extremely slow, although no CPU is measured...
  8. A

    Solved Prove me wrong: Wifi 2.4G problem when USB-storage attached?

    wow... that document tells it all. Thanks!!
  9. A

    No 2.4g Wifi on AX86U after Merlin 388.1 stable (SOLVED)

    hi all: PROBLEM SOLVED I've found a solution to my problem. I discovered that my 2.4g wifi-problems started shortly after i connected a usb-powered harddrive to my Asus. I disconnected it (plugged it out) and rebooted my AX86u, and everything works well again on 2.4g wifi. Maybe this will...
  10. A

    Solved Prove me wrong: Wifi 2.4G problem when USB-storage attached?

    Hi all, Can somebody check if my experience is wrong or right? I've had a problem with my 2.4G wifi: all of a sudden the 2.4G clients could not connect to my router anymore. They connected to my other routers in Mesh-mode, but not to my main router anymore. I've searched and searched: did a...
  11. A

    No 2.4g Wifi on AX86U after Merlin 388.1 stable (SOLVED)

    hi all, After upgrading to Merlin 388.1 stable, i noticed that my 2.4g wifi clients are not connecting to my main router (AX86u). They still connect to my older AC68u's who are in Mesh-mode. The main router only serves a couple of 5g wifi clients. I didn't change any setting when upgrading...
  12. A

    Force different wifi-channels in Aimesh

    They are all wired attached.
  13. A

    Force different wifi-channels in Aimesh

    Hi all, Question: I have 3 asus-routers in Aimesh-setup. On my Wifi-radar app I can see that all three routers use the same channel for the wifi broadcast. See attached picture: the pink graph is showing all three router-signals. This surprises me, because I assume they're interfering each...
  14. A

    Safe flashing beta over merlin

    Thank you for your very complete answer. Highly appreciated. One thing: I came from an older Asus router (without Merlin), and used the settings-file in the new router (with Merlin) without any issue. So, maybe I was lucky :)
Top