Recent content by delid4ve

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    Mikrotik EoIP - Multiple Bridges Over L2TP

    I managed to get it working in the end, it was just how i was setting up the new type bridge vlans. I have something very strange going on though and i cant work out whats going on. So the following connection (all privates are 192.168.) : LAN (6.0/24) --> Site To Site VPN (L2TP/ipsec (3.1/32)...
  2. D

    Mikrotik EoIP - Multiple Bridges Over L2TP

    router 1 Rb200ahx2 - (switch vlans Pre 6.42) Bridge 1 members: Port 1 - vlan 1 untagged - to server Port 2 vlan1 untagged vlan2 tagged - to switch End of bridge Vlan 1 192.168.23.0/24 (server supplies dns/dhcp) Vlan 2 192.168.7.0/24 (pbx ip) Port 11 - isp L2tp ipsec vpn server 1 static ip...
  3. D

    Mikrotik DHCP Routing

    So I have managed to crack it using a few posts here and there. My setup is: Ubiquiti WAP —> Netgear Switch —> hapac2 Ubiquiti - 4 x ssids - 2 for 1 gateway and 2 for a VPN gateway (1 each 2&5 ghz) vlan 10 on VPN vlan 20 for regular cabled to switch port1 with the port set as tagged 10/20 and...
  4. D

    Mikrotik DHCP Routing

    Hi sfx I’ve already mapped the Ssids to vlans on the ubiquiti controller, it’s the actual routing to the different gateways whilst maintaining the same /24 subnet for wired and the two ssids I’m having trouble with getting my head around. Separate subnets for each is fine, it’s the combining...
  5. D

    Mikrotik DHCP Routing

    Didn’t really know what to call this.. So I am trying to achieve the following I have an ubiquiti wireless AP and a Mikrotik hapac2. I want to have two wireless networks one of which will give internet access over a vpn (route 192.168.0.3) and the other straight to wan (route 192.168.0.3). Now...
  6. D

    Ethernet Failover Help

    It’s only the router failure that I’m concerned about. The routers are directly below each other so I would like to think they could swap the cabling out and this seems like the simple option. They can live without WiFi They can live without a client pc going down I’ve already put together a...
  7. D

    Wireless Advice - Mikrotik

    Thanks for all your help and advice. I went with the HAP AC2 and 1x UAP-AC-LR. I can report: Wifi coverage is excellent (about 20m through multiple brick walls at AC speed) and i havn't even got round to mounting on a wall yet, just sitting on a shelf flat so no need for 2x Ubiquiti's (i have...
  8. D

    Ethernet Failover Help

    Due to me not being on premises all the time and no other staff having any I.T/Networking Knowledge (mine is only self taught and there is a lot i do not know) i'm having to implement some fail over. This may seem a dumb question but i dont know the best way to achieve. My network layout is as...
  9. D

    Wireless Advice - Mikrotik

    Thanks for the reply and detailed help. Yes i was looking at the HEX just after i posted as i thought i was probably going overkill for home. Ill take your advice though and get the ac2 as i can get a decent price due to the bad reviews everywhere. Not used Ubiquiti before but just done a bit...
  10. D

    Wireless Advice - Mikrotik

    Following deployment of a mikrotik RB1100AHx2 in my office and being very impressed, I'm now looking to replace my home system due to a dying Asus N66u. At present i have Wired Clients --> Netgear Prosafe Switch (House is full Cat 6 to this) --> (LAN) Asus N66u (Serving Wireless) (WAN) -->...
  11. D

    Mikrotik Queues Help

    Having a little trouble with Queue setup on an RB1100AHx2. Interface 11 - this goes out to wan 0.0.0.0 --> /31 ISP link address Interface 6/7/8 - these given are public routed IP addresses (/31) given to other routers Interface 9 - this is private LAN addressed (192.168.1.0/24) which is src...
  12. D

    DHCP on bridge ports mikrotik

    How do i go about putting 5 interfaces/ports into 1 subnet (a /28 public block) but assign a static IP address dynamically via DHCP per port/interface (another router connected to each port) (the ip to always be the same on each port) So i could plit the /28 into further blocks but this seems...
  13. D

    [SOLVED] Open VPN Static Route Help

    So after about 20 hours of tinkering I got it :D NAT: off Policy based routing Source IP: 192.168.0.0/24 Destination IP: 192.168.23.0/24 Inface: VPN This way only the traffic for .23 subnet goes through the VPN and everything else goes to normal WAN. Then the 1 IP I want firewalled on the...
  14. D

    [SOLVED] Open VPN Static Route Help

    So ive been trying to get this to work all day but im banging my head against the wall. 2 Locations, 1 work, 1 home. Work: Open VPN server on Mikrotik external: xxx.xxx.xxx.153/30 --> (Tunnel 192.168.20.1 -->192.168.20.2) ---> internal: 192.168.23.240/24 --->Asus N66u 192.168.23.254/24 Home...
  15. D

    Untagged VLAN

    So ive set up a few untagged VLANs before on netgear products but im struggling to find definative answers with a mikrotik. Please excuse my lack of understanding here. I have multiple subnets on interfaces that are fire-walled at layer 3. Does this mean that they are automatically isolated...
Top