Recent content by psychosb

  1. psychosb

    Firmware Version:384.14.0 & 384.14.2 can't connect for RT-AC88U

    My guess is that the merge made by RMerlin with the Stock Firmware on the 384.14 broke the AC88-U stability. - UPDATED: RT-AC88U, RT-AC3100 to GPL 384_81351 and binary blobs from 384_81116 Tested this Weekend the 384.81116 (Asus Latest), the 384.15, 384.14 (and 14.2) and could only make it...
  2. psychosb

    Problem with Guest Network (Wrong Password)

    I had the same problems with the latest version of the Asus Stock Firmware. If anyone is having the same problem with the AC88-U and the 2.4Ghz Guest Network problem, I have only managed to fix this downgrading the firmware to the 384.13.0. All working fine now.
  3. psychosb

    RT-AC88U Wi-Fi 2.4GHz Issues and Ethernet Issues 384.13_2

    Any update on .15? For me it was terrible. Could barely use 2.4Ghz and my Guest network stops working after 2 or 3 hours (Wrong Password problem). Downgraded to 384.13.0 and it's all working again.
  4. psychosb

    Problem with Guest Network (Wrong Password)

    Just an last update. Flashed with the Asus stock firmware (latest version) and the problem with the Guest Wifi has gone. EDIT: Has not gone. Just taked a little longer to happen.
  5. psychosb

    Problem with Guest Network (Wrong Password)

    My problem only happens on the guest networks. My main SSID works perfectly. Just did a hard reset, reconfigured the router and the Guest network still have the same problem. I think I'll give a try to the stock firmware to see if it changes.
  6. psychosb

    Problem with Guest Network (Wrong Password)

    It wouldn't bother me if it was once in a while, but this is very often. Just made a small test, rebooted my iPad that has the Guest Network saved, but the "Wrong Password" problem still happen. I'll try to reset to default settings and re-configure the router. Can't think in any other test...
  7. psychosb

    Problem with Guest Network (Wrong Password)

    It's not! The Unlimited access is enabled.
  8. psychosb

    Problem with Guest Network (Wrong Password)

    Hello Everyone. I'm having some problems with my Guest Networks, can anyone help me? My Guest network works only for a couple hours (couldn't measure how long, but It's about 3) and after that any Device that tries to connect (even devices that was connected before) get the "Incorrect...
  9. psychosb

    [Release 384/NG] Asuswrt-Merlin 384.5 is now available

    Anyone noticed a problem with "custom icons" inside the "Network Map" section? I can rename the devices, but when I choose a custom icon it automatically closes the screen so I can't click on the "Apply" button. Just uploaded from a 380 version and this was working before. Thanks!
  10. psychosb

    UPnP Media Server - File size limit?

    Hi there, Does anyone know if the Media Server option has a file size limit? I've shared my HDD using this option, so I can watch some 4k movies that I've downloaded using the Download Master, and it works really well... but I've noticed that when the files are >50Gb, the folder of that movie...
  11. psychosb

    System Log to USB disk

    Joe, how do you configured the script to run automatically on the router boot? Thanks
  12. psychosb

    Slow LAN Transfer when QoS is enabled!

    I'll made some tests on my router! I'm working too much these days, that I don't have the courage to play with the router! Anyway, I'll try deleting the rules and check if the same rule is slowing down my LAN transfer and I'll post here the results! Thanks for the help!
  13. psychosb

    Slow LAN Transfer when QoS is enabled!

    I disabled only on the Router! But I checked and the Jumbo Frames on my PC was already disabled! Here's the table: [email protected]:/tmp/home/root# iptables -t mangle -L -v Chain PREROUTING (policy ACCEPT 77736 packets, 37M bytes) pkts bytes target prot opt in out source...
  14. psychosb

    Settings.json

    The content of Downloads2/Config is: 03/02/2013 20:43 <DIR> blocklists 07/02/2013 18:13 982 dht.dat 03/02/2013 20:43 <DIR> nzbget 03/02/2013 20:43 <DIR> resume 07/02/2013 18:13 1.993 settings.json 07/02/2013 13:39...
  15. psychosb

    Settings.json

    Yeah, I managed to get it working this way! I'm trying to find a way to make the changes permanent!
Top