Recent content by theboz

Hi. I noticed several connections on the list of connections under asuswrt-Merlin, whose Tx and Rx numbers continually change. These are short term changes - seconds apart. Why would this be happening, and does it indicate a problem? I’m using an RT-X3000. TIA

Agree. Reason for mentioning was that my concern is not change of ip per se. Just that if Tivo does not have correct ip info they loose connection with one another and can not pass needed info for streaming. I no longer use MOCA for anything, so no Ethernet info from that route. Yes, connection...

Is there any documentation/guidance that tells the circumstances under which the routers disconnect the WAN port? I’m using an RT-AX3000 which is now connected directly to the internet via the FIOS network. I’m using FreeDNS on the router to mitigate IP changes, but a problem arises for the...

Problem found, but what the heck? Soon after posting my issue I checked the log and my vpn client2 was blathering this error: AEAD Decrypt error: bad packet ID I found a link that says this is “normal” when you have more than one tunnel running. Error. I shut down that client, and then...

I have a two router setup with ASUS RT-AX 3000 wan port to isp router/modem Verizon FIOS Lan port. “Normal“ transactions working well. I then started configuring the vpn server and some vpn clients - which seemed to work. But then, the proverbial hit the fan. Now, whenever I use a browser with...

Thanks.

Thanks, points taken. Would be using as a wireless repeater. If I intend to only repeat the 2.5 ghz signal would that pull other wi-fi down, or only the 2.5GHz?

Hey all. I replaced a(rather capable) Netgear 7500v2 with an ASUS RT-AX3000 to upgrade capabilities. I’m running Merlin 386.1beta5. I’d like to use the Netgear to expand the local net for better wi-fi coverage. How will this affect the ASUS router in terms of wi-fi capability and services on...

Sorry, but I’m not sure I understand your reply. I think that lalord69 meant he set it up on the Merlin GUI for the ASUS router, which I did also. And I don’t know any df call that would yield anything like menuTree. Mine just shows that diversion is on the usb and mounted. ???

OK. Me too. AX3000. Yes, it is not on the supported list on GitHub, but said what the heck and tried anyway. But same result as above uninstall and reboot solved.

Well, on the NAS, if t’s a static route, I’d doesn’t query dhcp on boot. I finally, changed the local net back to 192.168.50.0 , quickly fixed the NAS, changed the net back to 192.168.2.1, and everything settled out due to the slower boot of the NAS (lots of disks to check on boot!) thanks for...

I tried that and it failed. the other is what I’m trying to avoid...

On my router , an ASUS RT-AX3000, a device seen on the connected list as static 192.168.50.100, can not be pinged successfully from the router or anyone on the router’s local network, 192.168.2.0.0 Now, this happened as a BIG mistake. I initially set up the local net as 192.168.50.0.0. However...

I’m stumped (over my head) with this setup: ASUS Router(wan port)=> FIOS (lan port)=> ONT => Internet | Netgear switch=>FIOS(LAN PORT) ONT is Ethernet to FIOS network. Two subnets, 192.168.1.0 for FIOS, 192.168.50.0 for ASUS PRIMARY reason for setup is to eventually run VPN client on...

So does that mean later os should not have problem?