mount

Hi An industrial place is experiencing frequent losses of power but more than half of them is voluntary because of repairs, manufacturing, testing and they just hit the main breaker ... the employees know how to shutdown the PCs, but they don't have a quick way to shutdown the networking stuff...

Hello, there is a router with stock firmware Asus RT-AX53U I connected a USB device (Webcam, which has a built-in battery), everything works, it is also used as a video storage location, it is connected to the FTP server application. There is an unusual task, sometimes you need to turn off the...

Hey everyone. I wanted to share something I noticed today regarding the RT-AX86U router. It caught my attention that AdGuard wasn't running, so I decided to investigate further. Upon checking the router, I discovered that Entware was not mounted. To my surprise, the USB drive itself was not...

Is it possible to mount Google Drive with Rclone and share this with samba?

This is a bit of an odd one, and I think I've searched pretty thoroughly. Have been using my RT-AC86U with factory asuswrt for a little while, but recently installed Merlin for the ability to run cron jobs. After install, did a factory reset and aside from standard WAN settings left things...

Hi, A) Is there a way to automatically create the NFS mount-points eg. /mnt/nfs /mnt/nfs2 during router boot ? I have the mount in my /jfs/scripts/fstab.postconf: mount -t nfs 192.168.1.102:/volume1/public /mnt/nfs -o nfsvers=3,nolock,_netdev,rsize=8192,wsize=8192 It works manually after I...

Hi there, Quite new to the world of more complex NAS drives, just been using a simple WD MyBook Live for the past few years as a media server but wanted to move to Plex from Kodi for transcoding purposes. So I'm getting there but the biggest issue I have still is trying to transfer all my data...

(I hope this is the right forum for this question. Feel free to scoot me off somewhere else if not!) I just got a brand new Samsung SSD T5 and plugged it into the USB 3 slot of my ASUS RT-AC88U. Seems OK as far as it got but it is reported as unmounted. What do I do next? I am reasonably handy...

Hi, I installed curlftpfs on Merlin and mounted on router location available at /tmp/mnt/ftp. asus@router:/# curlftpfs domain.com /mnt/ftp -o [email protected]:password,allow_other asus@router:/# mount curlftpfs#ftp://domain.com/ on /tmp/mnt/ftp type fuse...

I'm trying to get a 32GB flash drive to mount on my RT-AC68P. I used the latest version of gparted to format it to ext4 and everything seemed fine. Here are the logs from the router. Running 380.65_2. Any ideas? Mar 16 11:24:13 kernel: usb 1-1: new high speed USB device using ehci_hcd and...

I'm trying to mount my Kingston HyperX as usb3 device but failed, mounted as EXT4. KINGSTON 64GB HX Savage USB 3.1/3.0 350MB/s R 180MB/s W Any suggestions here: nvram show | grep _speed usb_path2_speed=480 usb_path1_speed=480 It should be: 480 for USB2 and 5000 for USB3. And I have set Reducing...

Hello my friends, I have a Linksys with ASUSWRT merlin firmware on it, version 380.58 and I have 2 hard drives connected to it, one for tv shows and one for movies, my problem is that sometimes when it reboots the both get mounted but one of them, the one on the ubs 2.0 port gets (1) appended to...

My network is too decentralized right now in regard to file storage and sharing. The primary device is a Fedora machine with a 12 TB share in a BTRFS pool, then there is a 4TB MyCloud that I picked up on the cheap, and finally I have a 500GB USB 3.0 drive on the RT-AC68U. What I would like to...

Hi! I would like to mount a two samba share from my WDLXTVLIVE. Because I have connected the WDLXTVLIVE to router to ethernet. To copy the data donloaded by transmission from router more stable than wifi. I looking for it in intenet I found that syntaxis: This mount but I do not where is the...