vlan

I recently purchased an RT-BE96U and I'm getting it all set up. I have a lot of smart home devices, and for a long time, I've been meaning to separate them off my main network and put them all on a dedicated IoT network. Upgrading my router seemed like a great time to do this. So, after setting...

I'm plan on setting up a new router soon - ASUS RT-BE88U (All-in-one, no external switch) and I plan to use VLANs for better segmentation and security (Since the router supports it). My current plan is as follows: VLAN 2 (10.0.2.0/24): For my NAS. VLAN 3 (10.0.3.0/24): For IoT devices (like a...

1. Looking for a simple and 100% reliable way to determine if an Asus router supports VLAN management and Guest Network Pro. Is that the case with any and all models that are on the v3.0.0.6.102 codebase, or are there models that lack such functionality? Why not just look at the specs? Well...

I have an RT-BE88U as an access point. This is connected on trunked VLAN interface (eth9) to the backbone. Also configured are a couple "iot" virtual WLANs on VLANs. My question is: would it be possible, at some point, to have option to configure main WLAN (and management interface) into a...

I have 2 Internet connected networks, and wants to connect them by VLAN. Since I want laptops in Network 1 prints on the printers in Network 2. Network 1: Netgear RAXE500, WAN connect to another Internet line IP: 192.168.2.1 Devices in this network are printers, Android TVs, etc Network 2...

DO I need to goto FW_GT_AXE16000_90061024856 beta firmware or is there a way to have a seperate VLAN with LOT on current 388.2 Merlin firmware? If its not possible with 388.2 is FW_GT_AXE16000_90061024856 safe as long as I do NOT enable WAN access? Any help is appreciated. Charlie

I need to set up LOT VLAN. If I do NOT enable WAN access to router is it safe to use this beta firmware? CC

I'm looking for some clarity. I have 2 ET12 and 1 AX88U Pro (They are all running the firmware which supports GNP). Currently, one ET12 is the main router and the others are AiMesh nodes. I have an IoT VLAN (52) which works fine and propagates via my managed switches etc. I'm planning on adding...

Hello, I am trying my hardest to understand the „ethswctl“ and „vlanctl“ commands, but I am unable to set a single LAN port to VLAN ID 6, since that's all that I need. The problem is that, the GUI doesn't have that option in this specific model, it's only terminal based VLAN configuration if...

Sorry for another Guest/Vlan issue. Recently, setting up a separate IoT network using a new pair of ET12. Regardless whether I am using stable firmware 3.0.0.4.388_24542 or the beta 9.0.0.6.102.4856, I am seeing the same problem. If I use 9.0.0.6.102.4856, the using the Guest Network Pro IoT...

Hi! I'm working with an Asus RT-AX88U Pro router and an Asus ExpertWiFi EBA63 access point using AiMesh with a wired backhaul. In between, there's a Unifi USW Enterprise switch. The network has a mix of wired and wireless devices, and the wireless devices successfully roam between the RT-AX88U...

Hi all, I've been trying to set up VLANs on RT-AX86U Pro - firmware 34313. Topology: router in one room, L2 switch (D-Link DGS-1100-24) in another room - there's just one UTP between the rooms. Requested functionality: 1) WiFi + Ethernet (default) network with DHCP (192.168.30.0/24) for...

I was happy with my RT-AC87U using Merlin! Everything seemed to work fine, and the WiFi range was impressive. Then my ISP offered me optical service at 500 up and 500 down for the same price I was paying for VHDSL 50/25! So I jumped at that! They installed a Nokia optical modem. And sent me...

I own a RT-AX88U Pro and recently update the firmware and wanted to use the VLAN feature. Normally with any SMB AP product, it is a slam dunk easy config. But I am not sure about these ASUS consumer APs. Here is the topology of my network (simplified) Questions: 1) In AP mode, under the...

As a newby I have been trying to configure my RT-AX88U-Pro router to isolate a camera system connected to LAN poort 2 from the rest on the LAN, so basically to setup a guestnet which only has access to internet. Funny enough with Asus stock firmware I can setup a VLAN and configure LAN poort 2...

just trying to put one of the 10Gb port in Trunk mode. But it's not passing traffic. Anyone know if the ASUS use Native VLAN? As soon as I set either side Trunk All Vlan it just drops my main VLAN is 1000 and I have bunch of others. the other side is a Brocade VDX 6740 10GB...

I have an ASUS RT AC-66U Wi-Fi router with stock firmware which works in router mode with ppp connection to ISP. Recently when I was trying to capture network traffics on the router with tcpdump, I realized that most outbound traffic can only be captured on eth0 and most inbound traffic can...

Hello, I will describe here my experience regarding the creation of an additional SSID (on top of the main and guest ones) on a R7800 in AP mode, with @Voxel's firmware, and having it in its own VLAN. So I have my main router (no wifi) under OpenWrt. The router is connected with ethernet to...

So Ive looked at similar threads, but nothing is concrete in their solutions to achieve what I want to do. I have a Raspberry Pi that is running docker. These docker containers are IPV6 enabled and want to be able to access the IPV6 Internet. For this to happen you need to enable Static Routes...

I have a detached garage and started several years ago with an AX92U mesh pair (wired back-haul). Quickly dumped the mesh (poor transfer between nodes) for double nat for a while. Finally landed on running the garage 92U in AP mode. This worked well, with great router switching and wifi control...