3.0.0.4.374.5656 fixes 3G Dongles Huawei ?

[cyborgpunte]

Isn't your ISP saving timestamps and IP addresses ?
Have you registered your router at the manufacturer ?

 

[plun]

Isn't your ISP saving timestamps and IP addresses ?
Have you registered your router at the manufacturer ?

No my ISP has a well filled pool with ip-adresses.

Nevertheless I switched back to Merlin and stays there for a while.

Jan 1 01:01:49 kernel: cdc_ncm: usb0: 150 mbit/s downlink 150 mbit/s uplink
Jan 1 01:01:49 kernel: cdc_ncm: usb0: network connection: connected

Thats it with the magic commands from su_root!

(and my missus kills me if I test more...)

 

[jonny]

Thats it with the magic commands from su_root!

I too stay with magic script and merlins build

 

[cyborgpunte]

Weird, I can't get this services-start script to work.
No matter how long sleep, but udhcpc command then works in CLI.
Then it works in my dualwan enviroment.

But if I mount my 32GB SDflash in my E3276s-150 NONEhilink,
then I'm stuck with udhcpc everywhere.

I think I have to reconfig my Tiny d0vad0, or back to RT-AC68U_3.0.0.4_374.41_alpha4

 

[fraatti]

I think I have to reconfig my Tiny d0vad0, or back to RT-AC68U_3.0.0.4_374.41_alpha4

I will soon start to use internet just with huawei 4g dongle with ac68 router. Could you send link for that firmware?

When I bought this router, I though that this would be best router to use internet with 4g dongle. After reading this forum it seems that I was wrong and firmware is total mess...

It seems that I should have bought Huawei b593s router with built in modem. It is said to be rock stable.

 

[cyborgpunte]

@fraatti
Don't know but according to this thread seems it works with latest
Merlin build for other but not for me I use dual wan, SDcard, big USBdisc, other APN, NONEhilink.

I guess they as you use just dongle and several of them ISP= telenor.
So read this thread and try the script, I guess it should work.
With a startscript and correct APN.

 

[plun]

@fraatti
Don't know but according to this thread seems it works with latest
Merlin build for other but not for me I use dual wan, SDcard, big USBdisc, other APN, NONEhilink.

As I wrote earlier, rename your script to init-start and it will work and longer sleeps so the ASUS script first fails.

#!/bin/sh
sleep 120
echo -e "AT^NDISDUP=1,1,\"internet.telenor.se\"\r" > /dev/ttyUSB1
sleep 5
udhcpc -i usb1 -p /var/run/udhcpc1.pid -s /tmp/udhcpc

The script must then be saved as a unix-script and therefore Notepad++ is needed.

After upload to the router the script must be changed to executable (X) for the owner (root) (properties)

About:
https://github.com/RMerl/asuswrt-merlin/wiki/User-scripts

and then be happy

 

[cyborgpunte]

Thanks for advice, but I think you telling me how to suck eggs.
Nothing new for me in your advice hopefully it could help someone else.

 

[plun]

Strange, rebooted and this is the important from syslog.

Jan 1 01:01:29 WAN Connection: Fail to connect with some issues.
Jan 1 01:01:29 dnsmasq[556]: read /etc/hosts - 5 addresses
Jan 1 01:02:12 kernel: cdc_ncm: usb0: 150 mbit/s downlink 150 mbit/s uplink
Jan 1 01:02:12 kernel: cdc_ncm: usb0: network connection: connected
Jan 1 01:02:12 kernel: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
Jan 1 01:02:17 dnsmasq[556]: read /etc/hosts - 5 addresses
Jan 1 01:02:17 start_nat_rules: apply the nat_rules(/tmp/nat_rules_usb0_usb0)!
Jan 1 01:02:17 dnsmasq[556]: read /etc/hosts - 5 addresses
Jan 1 01:02:17 dnsmasq[556]: using nameserver 195.54.122.221#53
Jan 1 01:02:17 dnsmasq[556]: using nameserver 195.54.122.211#53
Jan 1 01:02:18 dnsmasq[556]: exiting on receipt of SIGTERM
Jan 1 01:02:18 dnsmasq[1277]: started, version 2.69 cachesize 1500
Jan 1 01:02:18 dnsmasq[1277]: warning: interface tun21 does not currently exist
Jan 1 01:02:18 dnsmasq[1277]: asynchronous logging enabled, queue limit is 5 messages
Jan 1 01:02:18 dnsmasq-dhcp[1277]: DHCP, IP range 192.168.1.2 -- 192.168.1.254, lease time 1d
Jan 1 01:02:18 dnsmasq[1277]: read /etc/hosts - 5 addresses
Jan 1 01:02:18 dnsmasq[1277]: using nameserver 195.54.122.221#53
Jan 1 01:02:18 dnsmasq[1277]: using nameserver 195.54.122.211#53
Jan 1 01:02:19 WAN Connection: WAN was restored.

So the Asus script fails at 1.29 and my script runs after 2 minutes without any issues.

I also got "Dual WAN" enabled.

 

[Speedy1205]

as I remember the DUAL WAN has to be enabled. Without the Dual Wan the LTE Modem will never get connected.

I was reading this somewhere but don't remember where.

 

[cyborgpunte]

OK, it dosnt work for me !!!!!
Modem + SIM is OK in windows XP

===
Jun 4 06:47:57 kernel: cdc_ncm: usb0: 43 mbit/s downlink 43 mbit/s uplink
Jun 4 06:47:57 kernel: cdc_ncm: usb0: network connection: connected
==

I have this modem (NONEhilink)
Manufacturer: huawei
Model: E3276
Revision: 21.263.03.01.07
IMEI: 86 37 xx xx xx xxx
+GCAP: +CGSM,+DS,+ES
^FHVER:"E3276s-150 21.263.03.01.07,CH1E3276SM Ver.C"
AT^SETPORT?:A1,A2;10,12,16,A1,A2

I guess you have kinda this hilink modell ?????

http://foretag.telenor.se/mobilt-bredband/huawei-1/usb-modem-2/huawei-e3276-4g/

 

[plun]

===
Jun 4 06:47:57 kernel: cdc_ncm: usb0: 43 mbit/s downlink 43 mbit/s uplink
Jun 4 06:47:57 kernel: cdc_ncm: usb0: network connection: connected
==

I have this modem (NONEhilink)
Manufacturer: huawei
Model: E3276
Revision: 21.263.03.01.07

No I have a unlocked modem E3276 from Telia.

Found modem : E3276
Model : Huawei E3276
Firmware : 21.192.03.01.07

Cannot break the connection for all info for the moment and don't remember any terminal commands for info about the modem....

EDIT a test.

Modem connected to PC and choose "Only 4G", then test with the router again.

 

[cyborgpunte]

Well if you asking me to test 4G only on PC ??
the answer is either way phone/PC/router I dont have 4G
simple as this with LTEonly NO connection

Are you using a telia branded dongle unlocked by yourself, with a telenor SIM ???

I thought that you was forced to use HILINK with them, so it dosnt matter hilink or not with telenor ???

 

[plun]

OK... then everything seems to be ok?!

I am using a Telia branded E3276 unlocked with DC-unlocker and then using Telenor 4G network....

 

[cyborgpunte]

Yes, everything is OK because dongle is connected d0vad0 Tiny, now again.

I wait for updated f/w from asus/merlin and try dualwan again then.

thanks for trying to help

 

[plun]

ver 374.43 including magic script up and running....

Checking for any issues.

 

[cyborgpunte]

Lack of time ATM, will try in a couple of days.
But where in changelog can I read about it ??

ver 374.43 including magic script up and running...........

 

[Speedy1205]

ver 374.43 including magic script up and running....

Checking for any issues.

jus reading the changelog but can not see any changes regarding the 3G/LTE Huawei Sticks. so the commands are working now and are included in the build ?

 

[plun]

jus reading the changelog but can not see any changes regarding the 3G/LTE Huawei Sticks. so the commands are working now and are included in the build ?

No the "self-made" script works and the firmware seems to be fine.

Sorry for the confusion!

 

[cyborgpunte]

Yes, I guess that you have a little homework todo and learn about jffs.

No the "self-made" script works and the firmware seems to be fine.

Sorry for the confusion!