Release Asuswrt-Merlin 3006.102.7 is now available

[Igor]

Is it possible to add an AiMesh node via terminal?

 

[Howard_inGA]

This initial install attempt failed-- GT-AXE16000_3006_102.7_1-gb80bd846c0 --and the router reverted to Current Version : 3006.102.7 after the required manual reboot. Like many of the latest upgrades, the hard manual reboot is called for in the software dialogue.
Not sure why the _1 is being rejected on the 16000??
Tried it again with the same failure to install...
Here is the post-manual restart log:

Dec 31 19:02:30 kernel: eth5 (Int switch port: 6) (Logical Port: 6) (phyId: 13) Link Up at 2500 mbps full duplex
Mar 20 12:12:21 kernel: SHN Release Version: 2.0.6 9d6bb506
Mar 20 12:12:21 kernel: UDB Core Version: 0.2.20
Mar 20 12:12:21 kernel: Registered DNS Req parsing
Mar 20 12:12:21 kernel: sizeof forward pkt param = 280
Mar 20 12:12:38 kernel: In wl_dfs_cac_notify_status chanspec 0xec32 DFS state 2
Mar 20 12:12:40 kernel: Can't add zero mac!
Mar 20 12:12:40 kernel: CPU: 3 PID: 5648 Comm: amas_lib Tainted: P O 4.19.183 #1
Mar 20 12:12:40 kernel: Hardware name: GTAXE16000_2GB (DT)
Mar 20 12:12:40 kernel: pstate: 60040010 (nZCv q A32 LE aif)
Mar 20 12:12:40 kernel: pc : 00000000f6d548fc
Mar 20 12:12:40 kernel: lr : 00000000f6d2caac
Mar 20 12:12:40 kernel: sp : 00000000f640bfc8
Mar 20 12:12:40 kernel: x12: 0000000000000025
Mar 20 12:12:40 kernel: x11: 00000000f640c4b4 x10: 00000000002b437c
Mar 20 12:12:40 kernel: x9 : 00000000f640eac8 x8 : 00000000f6e1b000
Mar 20 12:12:40 kernel: x7 : 0000000000000000 x6 : 00000000f72229e3
Mar 20 12:12:40 kernel: x5 : 00000000fbad8004 x4 : 00000000f640c4c8
Mar 20 12:12:40 kernel: x3 : 00000000f72229e4 x2 : 0000000000000045
Mar 20 12:12:40 kernel: x1 : 0000000000000025 x0 : 00000000f72229e4
Mar 20 12:12:42 kernel: In wl_dfs_cac_notify_status chanspec 0xe872 DFS state 2
Mar 20 12:12:45 kernel: In wl_dfs_cac_notify_status chanspec 0xd028 DFS state 0
Mar 20 12:12:46 crond[3075]: time disparity of 1165930 minutes detected
Mar 20 12:12:49 kernel: In wl_dfs_cac_notify_status chanspec 0xe932 DFS state 1
Mar 20 12:12:51 kernel: In wl_dfs_cac_notify_status chanspec 0xd099 DFS state 0
Mar 20 12:13:00 kernel: wfd_registerdevice Successfully registered dev wds1.0.1 ifidx 1 wfd_idx 1
Mar 20 12:13:00 kernel: Register interface [wds1.0.1] MAC: e8:9c:25:9e:5d:c4
Mar 20 12:13:49 kernel: In wl_dfs_cac_notify_status chanspec 0xe932 DFS state 2
Mar 20 12:14:55 SIG_UPDATE: current sig : 2498
Mar 20 12:14:55 SIG_UPDATE: latest sig : 2498

Ideas?

 

[robinjoo1]

anything i can do about this

when i run in ipv4 only mode i get the full 2040mbps via spdmerlin
yet when i enable ipv6 it drops to a consistent 1140

 

[AntonK]

anything i can do about this

when i run in ipv4 only mode i get the full 2040mbps via spdmerlin
yet when i enable ipv6 it drops to a consistent 1140

This solved the same problem with my connection: "If you experience very slow download/upload speeds (especially with Gigabit, Fiber, or WSL2), disabling LSO V2 (IPv6) in your network adapter's Advanced Properties is a common, effective troubleshooting step." Device Manager -- Network Adapter -- Ethernet Controller -- Properties -- Advanced.

 

[robinjoo1]

This solved the same problem with my connection: "If you experience very slow download/upload speeds (especially with Gigabit, Fiber, or WSL2), disabling LSO V2 (IPv6) in your network adapter's Advanced Properties is a common, effective troubleshooting step." Device Manager -- Network Adapter -- Ethernet Controller -- Properties -- Advanced.

its via spdmerlin hence a addon on the router
i now selected a different server and all seems well

 

[robinjoo1]

can someone help me it seems i made a bridge connection sometime ago how can i remove that

Mar 21 14:43:40 kernel: br0: port 1(eth0) entered blocking state
Mar 21 14:43:40 kernel: br0: port 1(eth0) entered forwarding state


can i remove it

 

[ColinTaylor]

can someone help me it seems i made a bridge connection sometime ago how can i remove that

Mar 21 14:43:40 kernel: br0: port 1(eth0) entered blocking state
Mar 21 14:43:40 kernel: br0: port 1(eth0) entered forwarding state


can i remove it
View attachment 70815
View attachment 70816

br0 is the regular LAN interface (which is always present). It has nothing to do with bonding or link aggregation.

 

[Mutzli]

Just quick feedback installed version 3006.102.7_1 on both, RT-BE96U and RT-BE92U. No issues detected.

 

[lgkahn]

is there a version 7_2 alpha alluded to or a new beta... i cant find either thanks

 

[RMerlin]

is there a version 7_2 alpha alluded to or a new beta... i cant find either thanks

7_1 is the test build. For point releases, I do like Linux used to do: use odd version for development builds, and even version for release. So, 7_1 is a test build, 7_2 will be the final release once available.

 

[Igor]

Always a blank page :-( I can't add a new node.

Solution.

http://ip/Advanced_SettingBackup_Content.asp

1. Save setting.
2. Backup JFFS partition.
3. Factory default.
4. Restore setting.
5. Restore JFFS partition.