echoowall
New Around Here
AX86U Merlin latest firmware, openvpn use problem The 2.5G port device connected with the network cable cannot be accessed when using the openvpn program, and the access of other interfaces and wlan interfaces is normal. Below are the traceroute details.
traceroute 192.168.51.200
traceroute to 192.168.51.200 (192.168.51.200), 64 hops max, 52 byte packets
1 * 10.10.10.2 (10.10.10.2) 7.993 ms *
2 10.10.10.1 (10.10.10.1) 8.461 ms 1.663 ms 1.642 ms
3 10.18.0.1 (10.18.0.1) 5.005 ms 4.673 ms 4.608 ms
4 192.168.51.200 (192.168.51.200) 5.162 ms 5.617 ms 5.127 ms
This is a device that cannot be accessed when using the openvpn program to connect, but it can be accessed normally in a local area network environment.
traceroute 192.168.51.5
traceroute to 192.168.51.5 (192.168.51.5), 64 hops max, 52 byte packets
1 10.10.10.2 (10.10.10.2) 5.047 ms * 8.295 ms
2 10.10.10.1 (10.10.10.1) 1.672 ms 2.617 ms 3.507 ms
3 10.18.0.1 (10.18.0.1) 6.092 ms 5.056 ms 4.555 ms
4 * *
The following is the situation of the AX86U routing table. The routing table looks normal.
All of my devices connected to the 2.5G port cannot be connected to the AX86U via openvpn. May I ask what is the problem?
traceroute 192.168.51.200
traceroute to 192.168.51.200 (192.168.51.200), 64 hops max, 52 byte packets
1 * 10.10.10.2 (10.10.10.2) 7.993 ms *
2 10.10.10.1 (10.10.10.1) 8.461 ms 1.663 ms 1.642 ms
3 10.18.0.1 (10.18.0.1) 5.005 ms 4.673 ms 4.608 ms
4 192.168.51.200 (192.168.51.200) 5.162 ms 5.617 ms 5.127 ms
This is a device that cannot be accessed when using the openvpn program to connect, but it can be accessed normally in a local area network environment.
traceroute 192.168.51.5
traceroute to 192.168.51.5 (192.168.51.5), 64 hops max, 52 byte packets
1 10.10.10.2 (10.10.10.2) 5.047 ms * 8.295 ms
2 10.10.10.1 (10.10.10.1) 1.672 ms 2.617 ms 3.507 ms
3 10.18.0.1 (10.18.0.1) 6.092 ms 5.056 ms 4.555 ms
4 * *
The following is the situation of the AX86U routing table. The routing table looks normal.
default | My IP | 0.0.0.0 | UG | 0 | 0 | 0 | WAN |
10.18.0.0 | * | 255.255.255.0 | U | 0 | 0 | 0 | tun21 |
My IP | * | 255.255.255.255 | UH | 0 | 0 | 0 | WAN |
169.254.0.0 | * | 255.255.0.0 | U | 0 | 0 | 0 | MAN |
192.168.50.0 | * | 255.255.254.0 | U | 0 | 0 | 0 | LAN |
239.0.0.0 | * | 255.0.0.0 | U | 0 | 0 | 0 | LAN |
All of my devices connected to the 2.5G port cannot be connected to the AX86U via openvpn. May I ask what is the problem?
Last edited: