What's new

Ax88u overflowing error log

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

idq1i

New Around Here
have this message on a loop. Restarted, reset, factory defaulted, used some other suggestions from this forum for similar reports, turned on/off smartconnect... no change

Oct 24 23:19:34 acsd: eth7: Selecting 2g band ACS policy
Oct 24 23:19:34 acsd: acs_get_country(392): get country on eth7 returned -19.
Oct 24 23:19:34 acsd: acs_start(408): eth7: Failed to get country info
Oct 24 23:19:34 acsd: acs_get_rs_info(220): failed to get chanspecret code: -19
Oct 24 23:19:34 acsd: acsd_chanim_init(118): eth7: failed to set chanim_sample_period
Oct 24 23:19:34 acsd: acsd_chanim_init(127): eth7: failed to set noise metric
Oct 24 23:19:34 acsd: acs_start(432): chanim init failed ret code: -19
Oct 24 23:19:37 acsd: acs_check_cap(334): eth7 Error -19 in getting cap
Oct 24 23:19:37 acsd: acs_check_cap(334): eth7 Error -19 in getting cap

symptoms: random wan disconnect with a red light, requiring manual reset

suggestions?

TIA
 
Try power cycling the router to reset the radio. Unplug the router while keeping the power switch on, wait 5 seconds, then plug it back in.
 
Try power cycling the router to reset the radio. Unplug the router while keeping the power switch on, wait 5 seconds, then plug it back in.
Thanks for the reply. Did that several times, no change. This error just continually fills up the error log.

I tried separating 2.4 g and 5g, turning each one individually off, changing the control channel, bandwidth, no change.

Latest asus fw
 
This looks like a hardware issue then, where you 2.4 GHz radio stops responding. I would request an RMA.
 

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top