BT10 AIMesh with XT9 as nodes

[CornelConstantin]

Hello,
I have a BT10 AIMesh with XT9 as nodes. My question is if the IoT wifi created on the BT10 is forwarded to the XT9 nodes.
Thank you

 

[bennor]

It may help if you provide the firmware versions you are running on the various devices and nodes.

 

[CornelConstantin]

XT9 is on 3.0.0.4_388_24753.
BT10 is on 3.0.0.6.102_36958.
when i used the latest version for BT10, i mean 3.0.0.6.102_38991, i could not connect the XT9 nodes (I have two of them)

 

[degrub]

Best practice is to keep them on the same branch, ie 3006 or 3004 if available and stable.
IF you downgrade, recommended to factory reset and manually start over config

 

[CornelConstantin]

Best practice is to keep them on the same branch, ie 3006 or 3004 if available and stable.
IF you downgrade, recommended to factory reset and manually start over config

from what i see on asus download page, 3004 is not available for BT10, while 3006 is not available for XT9

 

[degrub]

i would revert to the same code branch for both to minimize issues. Otherwise, it may or may not work well.