What's new

Voxel Custom firmware build for R7800 v. 1.0.2.88SF

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Voxel

Part of the Furniture
Continuation of

. . .
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-86sf.73362/
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-87sf.74003/

New version of my custom firmware build: 1.0.2.88SF.

Changes (vs 1.0.2.87SF):

1. Toolchain: Go is upgraded 1.16.6->1.17.
2. OpenSSL v. 1.1.1 package is upgraded 1.1.1k->1.1.1l (fixing CVE-2021-3711, CVE-2021-3712).
Base Scores (SUSE): 9.8 and 5.3.​
3. DNSCrypt Proxy v.2 is upgraded 2.0.45->2.1.0.
re: what to change in your config​
4. Fix typo in '/sbin/cmdupnp' (thanks to kamoj ).
5. ipset package is upgraded 7.14->7.15.
6. procps-ng package is upgraded 3.3.16->3.3.17.
7. pcre package is upgraded 8.44->8.45.
8. util-linux package is upgraded 2.37.1->2.37.2.
9. unbound package (used in stubby) is upgraded 1.13.1->1.13.2.
10. e2fsprogs package is upgraded 1.46.3->1.46.4.
11. libubox package is upgraded 2021-05-16->2021-08-19.
12. OpenVPN client init script: fix bash style comparison '==' -> '='.
13. Host tools (e2fsprogs): is upgraded to 1.46.4.

The link is:

https://www.voxel-firmware.com (thanks to vladlenas for his help with hosting).

Voxel.
 
Upgraded without a hitch. However, I had a hard time downloading it. Both Firefox and Edge had issues.

VOXEL.png
 
I have a problem with blocking each device in the access control. Hope everyone can share how to fix this problem. Tks !
 
Continuation of

. . .
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-86sf.73362/
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-87sf.74003/

New version of my custom firmware build: 1.0.2.88SF.

Changes (vs 1.0.2.87SF):

1. Toolchain: Go is upgraded 1.16.6->1.17.
2. OpenSSL v. 1.1.1 package is upgraded 1.1.1k->1.1.1l (fixing CVE-2021-3711, CVE-2021-3712).
Base Scores (SUSE): 9.8 and 5.3.​
3. DNSCrypt Proxy v.2 is upgraded 2.0.45->2.1.0.
re: what to change in your config​
4. Fix typo in '/sbin/cmdupnp' (thanks to kamoj ).
5. ipset package is upgraded 7.14->7.15.
6. procps-ng package is upgraded 3.3.16->3.3.17.
7. pcre package is upgraded 8.44->8.45.
8. util-linux package is upgraded 2.37.1->2.37.2.
9. unbound package (used in stubby) is upgraded 1.13.1->1.13.2.
10. e2fsprogs package is upgraded 1.46.3->1.46.4.
11. libubox package is upgraded 2021-05-16->2021-08-19.
12. OpenVPN client init script: fix bash style comparison '==' -> '='.
13. Host tools (e2fsprogs): is upgraded to 1.46.4.

The link is:

https://www.voxel-firmware.com (thanks to vladlenas for his help with hosting).

Voxel.
Just updated to 1.0.2.88SF no issues - Thank you very much Voxel.
 
I have a problem with blocking each device in the access control. Hope everyone can share how to fix this problem. Tks !
I'm not at home so can't see the exact screens or wording.
Using the "grand access" of "block" buttons didn't work for me, but adding Mac addresses to the block or white list did the trick.

Hopefully it works also for you.
 
How can I check to be sure the new FW update installed correctly or not. When I upload the image file I get a black page showing "Please wait a moment" then the page reverts back to the FW update screen after about 20 seconds. Usually I expect the router to reboot after a FW update but this isn't happening.

1630611615223.png
 
How can I check to be sure the new FW update installed correctly or not. When I upload the image file I get a black page showing "Please wait a moment" then the page reverts back to the FW update screen after about 20 seconds. Usually I expect the router to reboot after a FW update but this isn't happening.

View attachment 36091

You're using DumaOS, which isn't supported. Only stock firmware is suppported on R7800/R8900/R9000 and Orbi
 
You're using DumaOS, which isn't supported. Only stock firmware is suppported on R7800/R8900/R9000 and Orbi
Correct, I understand I am running a custom FW that is not supported.

Could you comment on the FW update process with Voxel's FW? I am coming from a older Voxel release, should I expect a reboot, is there a way to verify the FW updated after the flash?
 
Last edited:
Correct, I understand I am running a custom FW that is not supported.

Could you comment on the FW update process with Voxel's FW? I am coming from a older Voxel release, should I expect a reboot, is there a way to verify the FW updated after the flash?
I believe he's saying you need to flash back to stock FW first, then flash Voxel.
 

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top