Diversion - how to check if running or active

[kstamand]

I'm putting together a script to verify a list of "things" are running as expected on my router. I've checked ps | grep diversion and nvram show anything diversion related.

Is there a hidden diversion command or other command I can use to verify it's enabled and/or running (I checked FAQ and searched, but no luck)?

 

[JJohnson1988]

Can't you just check the dnsmasq.conf file to see if the Diversion lines are appended? The lines are only added if ad blocking mode is enabled within Diversion

 

[kstamand]

Can't you just check the dnsmasq.conf file to see if the Diversion lines are appended? The lines are only added if ad blocking mode is enabled within Diversion

I was thinking about checking diversion.conf for DIVERSION_STATUS setting, or possibly one of the other files (e.g., dnsmasq.postconf, dnsmasq.log). Before going that route, I figured I'd check to see if there might be another way

Thanks for the response, much appreciated

 

[JJohnson1988]

If you go with my solution, you may want to also check that a dnsmasq process is also running (in addition to the Diversion lines being at the tail end inside the /etc/dnsmasq.conf file)