[Fork] Asuswrt-Merlin 374.43 LTS releases (Archive)

[john9527]

Im having lots a trouble trying to download your firmware from onedrive, is it posible for you to have a mirror or torrent?

Give this a try
https://www.snbforums.com/threads/f...lts-releases-v29e2.18914/page-352#post-365306

 

[TerminX]

Ability to adjust wifi power levels even with the newer drivers

Thanks, this answers my question! I was under the impression that the limitations on power levels with newer versions of the firmware were implemented in the driver itself, and that updating to a newer driver/SDK meant gimping your power level regardless of what the UI might say.

 

[shooter40sw]

Hi @john9527 I just migrated to your fork, everything working great, but I installed transmission and when I try to update the block list from the transmission webpage it never updates and in the system log I get the following:

Jan 26 21:58:52 transmission-daemon[4088]: Error uncompressing blocklist: buffer error (-5) (rpcimpl.c:1561)

I made a search on google but it returned some stuff for the tranmission client on an OS and not for the router, so I dont have an idea to what to do.
It hade the original blocklist on the settings.json and I changed it to one on the iblocklist site, but it never updates and returns the error.
Thanks

 

[john9527]

I just migrated to your fork, everything working great, but I installed transmission and when I try to update the block list from the transmission webpage it never updates and in the system log I get the following:

Sorry, but no idea here either. I took a quick look at the transmission code, and the fail is in the transmission code when it's trying to 'inflate' the downloaded blacklist with zlib. I'm assuming you installed from Entware.....both transmission and zlib were just updated within the last 30 days. When was the last time before this you had done the install? Maybe an error crept in in the updates?

 

[shooter40sw]

Sorry, but no idea here either. I took a quick look at the transmission code, and the fail is in the transmission code when it's trying to 'inflate' the downloaded blacklist with zlib. I'm assuming you installed from Entware.....both transmission and zlib were just updated within the last 30 days. When was the last time before this you had done the install? Maybe an error crept in in the updates?

Thanks for the info, but it was a long time ago, think a reset to defaults when I used the merlin 380.69 build and installed and it worked at the time, when I reset the settings is when I update the blocklist just one time and never check it again, and yesterday when I reset default to your fork and installed everything from scratch, just hope that in a future update gets fixed, and yes I installed from entware.... everything else is working great no issues so far.
Thanks!

 

[john9527]

Update-30E2 is now available!

Update-30E2 Highlights

• Security fixes for recent ASUS CVE's applicable to the fork. Many of the recent CVE's are tied to exploits involving web tokens and are not applicable to the http auth used in the fork.
• Disabled HTTP access from WAN
• KRACK fix for AC56
• Component updates to NANO, CURL, LIBOGG and LIBVORBIS
• Update DNSCrypt resolver update script to point to new url location
• Misc ARM and MIPS component updates from 380/384 level ('E' Builds only)
  May fix HW acceleration over PPPoE (never had any volunteers for an early test )
• NEW: Ability to adjust kernel level TCP/UDP buffer allocations (access on Tools>Other Settings page). This may improve performance over high speed connections or when using VPNs
• IPTABLES fixes for save formatting and inability to delete rules created by IPTraffic.

Please review the 'Installation Notes' section in the first post for further information on installing this fork.
The 'E' Build series supports all the support routers, including the newer rev AC68U and similar routers, and is the default fork version. The biggest change is the inclusion of the KRACK fix for the N66, AC66, AC56 and AC68 routers when used as a Repeater or Media Bridge. The N16 will NOT be updated for the KRACK fix.
For those of you with early rev (A1,A2,B1) AC68U's who wish to remain with the earlier wireless drivers, I've included a build directory that continues to be based on the earlier drivers/SDK, Update-nnLx (Legacy 'L' Build). IMPORTANT: The legacy builds do NOT include the KRACK fix for any supported router since part of the fix requires new wireless drivers.
I've also included a file @UpgradeMatrix.txt in the download directory. This shows the options for each router and build combination, including the need for a Factory Default reset or possible JFFS reformat.
Thanks again for everyone's support!

LATEST RELEASE: Update-30E2, including support new rev AC68 class routers
26-January-2018
Merlin fork 374.43_30E2j9527
Download http://bit.ly/1YdgUcP
============================
SHA256

(Default Build - All supported routers)
f2622f948ad896cd12b5a809df6ded25361d6f7ab33e609cec77f7beab2b93ee  RT-N16_374.43_30E2j9527.trx
3a46e6162012b47455f30a62d5c323d54ad3ad9c542922f0497d88bc2c62bf32  RT-AC66U_374.43_30E2j9527.trx
6fe98c03a30a072f757889735af2d9870bc2e0b3e8372503cdf39ad08c1b7499  RT-N66U_374.43_30E2j9527.trx
56a19e522e57ce58cfd5383355d7d1f73607a5e4b9aa88215913f4c37b40fba2  RT-AC68U_374.43_30E2j9527.trx
0659d6de2b8aec62971d7643ef9859965039afc8f1752a9509c29bfc2efb1865  RT-AC56U_374.43_30E2j9527.trx
(Legacy Only Builds)
2dbea385559e3c4656f844781a337e49f8e7408cc950b0ce4b7961a6694a7bf3  RT-AC68U_3.0.0.4_374.43_2-30L2j9527.trx
1e6154d60ee3d59b138bed54c2bd4b552b2a6b0d85f3e4200c2232dae3d9632c  RT-AC56U_3.0.0.4_374.43_2-30L2j9527.trx
a2aa7ad5fa88164b7f464b451d6979123f9ecde0d2fa7084a3a1b5e38358ed69  RT-N16_3.0.0.4_374.43_2-30L2j9527.trx
b03fd4f46ce40d8b2e5b23380999a746bdbe97deb7e7ecb83b004fdb1e8cc9de  RT-AC66U_3.0.0.4_374.43_2-30L2j9527.trx
6771a2b93b35a4bea5ae18f2392fae3665cf78c73c2ee9a894144b18afaa62ef  RT-N66U_3.0.0.4_374.43_2-30L2j9527.trx

 

[Max-H]

Flashed ('E' Build) my AC68 rev a1. No problem. Thx John.

 

[jrmwvu04]

Update-30E2 is now available!

Updated, and everything appears to be in order.

 

[MFM000]

Update-30E2 is now available

Flashed 30E2 over V29 on RT-AC66U without problem

 

[trisk]

Has anyone noticed problems with WAN side DHCPv6 on recent versions (V29-V30)? My RT-AC68U isn't picking up a IPv6 address or delegated prefix. I see outgoing DHCPv6 solicits but no responses. I don't think anything has changed in the upstream router which continues to send non-DHCP router advertisements.

 

[jrmwvu04]

Has anyone noticed problems with WAN side DHCPv6 on recent versions (V29-V30)? My RT-AC68U isn't picking up a IPv6 address or delegated prefix. I see outgoing DHCPv6 solicits but no responses. I don't think anything has changed in the upstream router which continues to send non-DHCP router advertisements.

As a matter of fact, I’ve noticed a couple of times over the past few weeks that I’ve not had ipv6 addresses. Didn’t look into it because a reboot solves it. I’ll look at logs if I see it again.

 

[john9527]

Has anyone noticed problems with WAN side DHCPv6 on recent versions (V29-V30)? My RT-AC68U isn't picking up a IPv6 address or delegated prefix. I see outgoing DHCPv6 solicits but no responses. I don't think anything has changed in the upstream router which continues to send non-DHCP router advertisements.

and @jrmwvu04

Haven't touched the IPv6 stack in ages and haven't noticed any loss on my end. If you can capture anything from the syslog, I'd be glad to take a look.

One thing....if you are running dual stack with a VPN client active, and select the Block IPv6 option, your clients (both VPN and non-VPN if using policy rules) won't receive an IPv6 address.

 

[trisk]

I fixed it just now, looks like the RT-AC68U wasn't responding to IPv6 neighbour solicitations so the upstream router was unable to send DHCPv6 replies. "Filter IPv6 Neighbor Solicitation" was set to "No" in the firewall config, but I toggled it on and off and that appears to have made DHCPv6 work again.

I have tcpdump output from the exact moment it started working. The first set of three neighbour solitications from the upstream router got no response from RT-AC68U:

14:50:02.103433 IP6 fe80::16dd:a9ff:fe8d:4838.546 > ff02::1:2.547: dhcp6 solicit                                                
       0x0000:  6000 0000 0059 1101 fe80 0000 0000 0000  `....Y..........                                                                                      
       0x0010:  16dd a9ff fe8d 4838 ff02 0000 0000 0000  ......H8........                                  
       0x0020:  0000 0000 0001 0002 0222 0223 0059 3778  .........".#.Y7x                                                                                      
       0x0030:  0185 2d13 0001 000a 0003 0001 14dd a98d  ..-.............                                                                  
       0x0040:  4838 000e 0000 0008 0002 ffff 0006 0004  H8..............                                                                                      
       0x0050:  0017 0018 0019 0029 000d 4838 0000 0000  .......)..H8....    
       0x0060:  0000 0000 001a 0019 ffff ffff ffff ffff  ................    
       0x0070:  4000 0000 0000 0000 0000 0000 0000 0000  @...............                                                                                      
       0x0080:  00                                       .                  
14:50:02.297511 IP6 fe80::d604:cdff:fe34:7f30 > ff02::1:ff8d:4838: ICMP6, neighbor solicitation, who has fe80::16dd:a9ff:fe8d:4838, length 32                  
       0x0000:  6000 0000 0020 3aff fe80 0000 0000 0000  `.....:.........                                                                
       0x0010:  d604 cdff fe34 7f30 ff02 0000 0000 0000  .....4.0........                                                              
       0x0020:  0000 0001 ff8d 4838 8700 ea60 0000 0000  ......H8...`....
       0x0030:  fe80 0000 0000 0000 16dd a9ff fe8d 4838  ..............H8
       0x0040:  0101 d404 cd34 7f30                      .....4.0                                                                                              
14:50:03.299153 IP6 fe80::d604:cdff:fe34:7f30 > ff02::1:ff8d:4838: ICMP6, neighbor solicitation, who has fe80::16dd:a9ff:fe8d:4838, length 32
       0x0000:  6000 0000 0020 3aff fe80 0000 0000 0000  `.....:.........                                                                                      
       0x0010:  d604 cdff fe34 7f30 ff02 0000 0000 0000  .....4.0........
       0x0020:  0000 0001 ff8d 4838 8700 ea60 0000 0000  ......H8...`....
       0x0030:  fe80 0000 0000 0000 16dd a9ff fe8d 4838  ..............H8
       0x0040:  0101 d404 cd34 7f30                      .....4.0
14:50:04.301145 IP6 fe80::d604:cdff:fe34:7f30 > ff02::1:ff8d:4838: ICMP6, neighbor solicitation, who has fe80::16dd:a9ff:fe8d:4838, length 32
       0x0000:  6000 0000 0020 3aff fe80 0000 0000 0000  `.....:.........
       0x0010:  d604 cdff fe34 7f30 ff02 0000 0000 0000  .....4.0........
       0x0020:  0000 0001 ff8d 4838 8700 ea60 0000 0000  ......H8...`....
       0x0030:  fe80 0000 0000 0000 16dd a9ff fe8d 4838  ..............H8
       0x0040:  0101 d404 cd34 7f30                      .....4.0

After I changed the setting at 14:50:21 from the web interface the RT-AC68U started responding at 14:51:57:

14:51:56.933212 IP6 fe80::16dd:a9ff:fe8d:4838.546 > ff02::1:2.547: dhcp6 solicit
       0x0000:  6000 0000 0059 1101 fe80 0000 0000 0000  `....Y..........
       0x0010:  16dd a9ff fe8d 4838 ff02 0000 0000 0000  ......H8........
       0x0020:  0000 0000 0001 0002 0222 0223 0059 3778  .........".#.Y7x
       0x0030:  0185 2d13 0001 000a 0003 0001 14dd a98d  ..-.............
       0x0040:  4838 000e 0000 0008 0002 ffff 0006 0004  H8..............
       0x0050:  0017 0018 0019 0029 000d 4838 0000 0000  .......)..H8....
       0x0060:  0000 0000 001a 0019 ffff ffff ffff ffff  ................
       0x0070:  4000 0000 0000 0000 0000 0000 0000 0000  @...............
       0x0080:  00                                       .
14:51:57.133769 IP6 fe80::d604:cdff:fe34:7f30 > ff02::1:ff8d:4838: ICMP6, neighbor solicitation, who has fe80::16dd:a9ff:fe8d:4838, length 32
       0x0000:  6000 0000 0020 3aff fe80 0000 0000 0000  `.....:.........
       0x0010:  d604 cdff fe34 7f30 ff02 0000 0000 0000  .....4.0........
       0x0020:  0000 0001 ff8d 4838 8700 ea60 0000 0000  ......H8...`....
       0x0030:  fe80 0000 0000 0000 16dd a9ff fe8d 4838  ..............H8
       0x0040:  0101 d404 cd34 7f30                      .....4.0
14:51:57.133939 IP6 fe80::16dd:a9ff:fe8d:4838 > fe80::d604:cdff:fe34:7f30: ICMP6, neighbor advertisement, tgt is fe80::16dd:a9ff:fe8d:4838, length 32
       0x0000:  6000 0000 0020 3aff fe80 0000 0000 0000  `.....:.........
       0x0010:  16dd a9ff fe8d 4838 fe80 0000 0000 0000  ......H8........
       0x0020:  d604 cdff fe34 7f30 8800 e2cd 6000 0000  .....4.0....`...
       0x0030:  fe80 0000 0000 0000 16dd a9ff fe8d 4838  ..............H8
       0x0040:  0201 14dd a98d 4838                      ......H8
14:51:57.134555 IP6 fe80::d604:cdff:fe34:7f30.547 > fe80::16dd:a9ff:fe8d:4838.546: dhcp6 reply
       0x0000:  6000 0000 0088 1140 fe80 0000 0000 0000  `......@........
       0x0010:  d604 cdff fe34 7f30 fe80 0000 0000 0000  .....4.0........
       0x0020:  16dd a9ff fe8d 4838 0223 0222 0088 b44a  ......H8.#."...J
       0x0030:  0785 2d13 0019 0029 000d 4838 0009 3a80  ..-....)..H8..:.
       0x0040:  000d 2f00 001a 0019 0012 7500 0012 7500  ../.......u...u.
       0x0050:  4026 0017 00e0 907e cf00 0000 0000 0000  @&.....~........
       0x0060:  0000 0100 0a00 0300 0114 dda9 8d48 3800  .............H8.
       0x0070:  0200 0e00 0100 0121 4d9e e4d4 04cd 347f  .......!M.....4.
       0x0080:  3000 0e00 0000 0700 01ff 0017 0010 2600  0.............&.
       0x0090:  1700 e090 7ec0 0000 0000 0000 0001 0018  ....~...........
       0x00a0:  000e 0861 7474 6c6f 6361 6c03 6e65 7400  ...attlocal.net.

Syslog output is here: https://gist.github.com/trisk/2f2e2a5f4f17521b28252efcadf9dd31
(forum doesn't let me paste it because of spam filtering)

 

[shooter40sw]

Hi @john9527 I mentioned before, and I dont know if anybody else is having issues with the downloads from onedrive, but for me even at work that the internet is a bit more reliable its really slow, just to download the 20MB file of the firmware, it says it will take 1 hour to download and multiple times network error, so no other download site or mirror? when you gave out the amazon link it was the same result.
Thanks

 

[ColinTaylor]

@shooter40sw No problems downloading here, took about 3 seconds.

 

[marnold]

@shooter40sw No problems downloading here, took about 3 seconds.

Same here. Downloaded fine.

 

[Builder71]

Downloaded from OneDrive without (speed) problems.
Updated my RT-N66U from 29D4 to 30E2.
All seems to be fine. Thx!

 

[scaramonga]

@shooter40sw No problems downloading here, took about 3 seconds.

All good here, came down in seconds

 

[shooter40sw]

Thanks guys, nothing else to blame but my really poor third world "broad band", no irony its really really really bad, next weeks I will be moving from my home country so I hope its better.
Thanks

 

[oso2276]

Thanks guys, nothing else to blame but my really poor third world "broad band", no irony its really really really bad, next weeks I will be moving from my home country so I hope its better.
Thanks

Hi, I had problems downloading with Firefox and downthemall (download manager app). My work around was avoid using a download manager application. Did you try Firefox or Chrome?

Enviado desde mi Moto G (5) Plus mediante Tapatalk