GT-AXE11000 - VLAN ID for cityfibre ONT

[Unscathed]

Hey all,

Just looking for some advice before I take a dive in.

I'm currently looking at the GT-AXE11000, however, this model doesn't support setting a VLAN ID for internet access.
I came across asuswrt-merlin, from my understanding, this would allow for VLAN ID setup via CLI but haven't been able to find anything in the documents (I'm probably just looking in the wrong place) on how to achieve this.

Just looking for some guidance on achieving this, I have an ONT provided by cityfibre which requires a VLAN ID of 911 for internet access

 

[Ripshod]

Even if you don't use the Merlin firmware there's methods for connection. IIRC with the old firmware you'd do this through LAN settings.
The settings are there, and many members are using asus routers with Cityfibre without issue.
Jump right in. We'll help with settings when you're ready.

 

[ExtremeFiretop]

Hey all,

Just looking for some advice before I take a dive in.

I'm currently looking at the GT-AXE11000, however, this model doesn't support setting a VLAN ID for internet access.
I came across asuswrt-merlin, from my understanding, this would allow for VLAN ID setup via CLI but haven't been able to find anything in the documents (I'm probably just looking in the wrong place) on how to achieve this.

Just looking for some guidance on achieving this, I have an ONT provided by cityfibre which requires a VLAN ID of 911 for internet access

Is this what your looking for? LAN --> IPTV --> Select ISP Profile --> Internet --> VID
Enter the VLAN ID under "VID" for my Bell ISP it was VLAN 35