drewski22785
Occasional Visitor
So I have been trying to run this issue down for days now thinking it was related to a unique router setup, a couple of you have been helping me work through those issues.
It turns out my issue was with the guest wifi itself, after reboot, and possibly other services restarts the iptables get changed and blocks all guest wifi to the internet. I do have the guest wifi set to internet only as well.
Initially I thought this was related to YazFi guest wifi addon but even with that completely uninstalled I still experienced the same issue. Non-Guest wifi continues to operate normally.
Before Reboot IPTABLES:
Chain INPUT (policy ACCEPT 958 packets, 186K bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
0 0 ACCEPT all -- br2 tun+ 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- br2 eth0 0.0.0.0/0 0.0.0.0/0
0 0 other2wan all -- !br0 eth0 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- br0 br0 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- br0 br0 LAN_SUBNET 0.0.0.0/0
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
0 0 NSFW all -- * * 0.0.0.0/0 0.0.0.0/0
0 0 OVPN all -- * * 0.0.0.0/0 0.0.0.0/0 state NEW
After Reboot IPTABLES:
Chain INPUT (policy DROP 2 packets, 120 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT udp -- br2 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53
6 1968 ACCEPT udp -- br2 * 0.0.0.0/0 0.0.0.0/0 udp dpt:67
0 0 ACCEPT udp -- br2 * 0.0.0.0/0 0.0.0.0/0 udp dpt:68
131 10596 DROP all -- br2 * 0.0.0.0/0 0.0.0.0/0
2099 340K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
1884 443K PTCSRVWAN all -- !br0 * 0.0.0.0/0 0.0.0.0/0
343 69032 PTCSRVLAN all -- br0 * 0.0.0.0/0 0.0.0.0/0
343 69032 ACCEPT all -- br0 * 0.0.0.0/0 0.0.0.0/0 state NEW
1882 442K ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 state NEW
Chain FORWARD (policy DROP 1 packets, 60 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
0 0 ACCEPT all -- br0 br0 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- lo lo 0.0.0.0/0 0.0.0.0/0
Is anyone else experiencing this with their guest wifi after a reboot? I have no scripts running besides ntp refresh. Merlin 386.3.2
It turns out my issue was with the guest wifi itself, after reboot, and possibly other services restarts the iptables get changed and blocks all guest wifi to the internet. I do have the guest wifi set to internet only as well.
Initially I thought this was related to YazFi guest wifi addon but even with that completely uninstalled I still experienced the same issue. Non-Guest wifi continues to operate normally.
Before Reboot IPTABLES:
Chain INPUT (policy ACCEPT 958 packets, 186K bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
0 0 ACCEPT all -- br2 tun+ 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- br2 eth0 0.0.0.0/0 0.0.0.0/0
0 0 other2wan all -- !br0 eth0 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- br0 br0 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- br0 br0 LAN_SUBNET 0.0.0.0/0
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
0 0 NSFW all -- * * 0.0.0.0/0 0.0.0.0/0
0 0 OVPN all -- * * 0.0.0.0/0 0.0.0.0/0 state NEW
After Reboot IPTABLES:
Chain INPUT (policy DROP 2 packets, 120 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT udp -- br2 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53
6 1968 ACCEPT udp -- br2 * 0.0.0.0/0 0.0.0.0/0 udp dpt:67
0 0 ACCEPT udp -- br2 * 0.0.0.0/0 0.0.0.0/0 udp dpt:68
131 10596 DROP all -- br2 * 0.0.0.0/0 0.0.0.0/0
2099 340K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID
1884 443K PTCSRVWAN all -- !br0 * 0.0.0.0/0 0.0.0.0/0
343 69032 PTCSRVLAN all -- br0 * 0.0.0.0/0 0.0.0.0/0
343 69032 ACCEPT all -- br0 * 0.0.0.0/0 0.0.0.0/0 state NEW
1882 442K ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 state NEW
Chain FORWARD (policy DROP 1 packets, 60 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
0 0 ACCEPT all -- br0 br0 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- lo lo 0.0.0.0/0 0.0.0.0/0
Is anyone else experiencing this with their guest wifi after a reboot? I have no scripts running besides ntp refresh. Merlin 386.3.2