help I updated official firmware

[x7007]

I can't get it the router what do I do. it doesn't accept my user and password

 

[ColinTaylor]

Open your browser in private mode. If that doesn't work press the reset button for 5 seconds and setup the router from scratch.

 

[bennor]

I can't get it the router what do I do. it doesn't accept my user and password

May help if you provide more information.
What router model? GT-AXE1600 or something different?
What firmware did you update to, 3006.102.7 or something else?
Have you tried turning off the power to the router waiting a few minutes then power the router back on then try to access the router GUI at the router's IP address?
Have you tried a different computer and different web browser? Clear the browser's cache too.
You can likely reset the router by pressing the router reset button on the router for 5 to 10 seconds.

 

[x7007]

Run your browser in safe mode. If that doesn't work press the reset button for 5 seconds and setup the router from scratch.

it doesn't reset it it always comes the same
I tried wps mode it was stick on green and I turned it off on and still back




what do I do . the password supposed to work it's what I used with Merlin . but I updated official one to see if I have issues

 

[x7007]

it doesn't reset it it always comes the same

I tried wps mode

May help if you provide more information.
What router model? GT-AXE1600 or something different?
What firmware did you update to, 3006.102.7 or something else?
Have you tried turning off the power to the router waiting a few minutes then power the router back on then try to access the router GUI at the router's IP address?
Have you tried a different computer and different web browser? Clear the browser's cache too.
You can likely reset the router by pressing the router reset button on the router for 5 to 10 seconds.

it doesn't reset no matter what I do
axe16000 3.006 official
I was using Merlin 3007

it doesn't want to reset it comes with the same settings but doesn't let me get it menu

2 computers

 

[x7007]

I did reset now it doesn't connect to internet anymore but I can access the router menu

 

[bennor]

I tried wps mode

ROG Rapture GT-AXE16000 Hard Factory Reset method:
[Wireless Router] ASUS router Hard Factory Reset - Method 2

1. Turn the router off.
2. Press and hold the WPS button and turn the router on.
3. Power light is on (keep holding the WPS button).
4. Release the WPS button after the power light is off.
5. Reboot your router by manually pressing the power button.

 

[x7007]

ROG Rapture GT-AXE16000 Hard Factory Reset method:
[Wireless Router] ASUS router Hard Factory Reset - Method 2

1. Turn the router off.
2. Press and hold the WPS button and turn the router on.
3. Power light is on (keep holding the WPS button).
4. Release the WPS button after the power light is off.
5. Reboot your router by manually pressing the power button.

ok it works now after I did reset normally but it ask for password and I don't get it. what kind of password does it wants

pass word mist contain at least 10 length . 1 letter . 1 special 1 nuemeric

that's why it didn't want to get in because the password wasn't like it wanted. but I am trying all kind of password it doesn't accept

 

[x7007]

what does it want

 

[ColinTaylor]

what does it want

"Shall not have consecutive identical characters."

 

[bennor]

what does it want

Read the password creation instructions. Do not use passwords with consecutive numbers or letters.

 

[x7007]

what kind of password does it wants??
its https maybe that's issue ?

 

[bennor]

what kind of password does it wants??
its https maybe that's issue ?

No. Read the password creation instructions. You cannot use consecutive numbers or letters. Your password "Testmeonetwo11223@" has consecutive numbers (1122).
Edit to add:
[Wireless Router] How do I enter my ASUS router's setting page using Web GUI?

Use long and more complex passwords: Use passwords with more than 10 characters mixed with capitalized letters, numbers, and special characters to increase the security level of your devices. Do not use passwords with consecutive numbers or letters, such as 1111111111, 1234567890, abcdefghij, or qwertyuiop.

 

[x7007]

Read the password creation instructions. Do not use passwords with consecutive numbers or letters.

ok it worked

No. Read the password creation instructions. You cannot use consecutive numbers or letters. Your password "Testmeonetwo11223@" has consecutive numbers (1122).
Edit to add:
[Wireless Router] How do I enter my ASUS router's setting page using Web GUI?

Merlin MUST put a warning when updating to official. if you don't have the password of 10 like I said and all the others then you can't login anymore!. Merlin doesn't care about that from older versions. so I was stuck. I didn't have strong password becuase hell, i just want to remember it, too many password around. official using HTTPS if you didn't enable it. so it's mess up if you return to official without reset just to check stuff without messing with all the settings all over again which takes A LONG TIME

Thanks everyone anyway.

Reset 10 sec eventually reset the device, official didn't want to connect to WAN and i didn't have time to mess with it so I just updated to merlin again and used my old settings, now it enters with the new password still, so restore Settings doesn't save password I see

I just had hurt attack almost, I scratch my faces from nervous, I had too many issues lately and still am. 2x TForce Z540 nvme died after 1.6 year and i did get much of the data, but then I bought another one Samsung 9100 pro 2tb just died 2 months! barely touched it, because of the stupid windows update! both of them died totally. Samsung I can replace, it's on RMA , Tforce wants to speed run of tests and it cost extra money to send them.
and some other weird issues, audio suddenly sound like crap somehow , the super charger 5va of my dac/amp suddenly burn/blowup . many weird things.

 

[Zirescu]

PEBKAC - Failed to read the release notes or the official documentation.