Skynet My internet speed dropped with Skynet on

[sleeps1007]

I have 1Gb speed and I average 850-950 Mb but when I turned on Skynet my speedtest would drop between 320-350Mb. Is there anything within Skynet that would allow me to get my original speeds?

 

[John Fitzgerald]

Did you set up a swap file on the ssd?

 

[Jack-Sparr0w]

https://www.snbforums.com/threads/amtm-step-by-step-install-guide-l-ld.56237/ use this guide

 

[elorimer]

Model? Firmware? Sounds like HW acceleration maybe.

 

[Viktor Jaep]

I have 1Gb speed and I average 850-950 Mb but when I turned on Skynet my speedtest would drop between 320-350Mb. Is there anything within Skynet that would allow me to get my original speeds?

When you enable both inbound and outbound filtering (Option 11 -> 4 ), then your speed will drop. If you only enable outbound filtering, then you will regain semi-normal speeds. This is normal, and by design, and been doing this since the beginning of time.

 

[sleeps1007]

Did you set up a swap file on the ssd?

I did

 

[sleeps1007]

Model? Firmware? Sounds like HW acceleration maybe.

AX88U and I have the latest Merlin firmware. HW accel is on

 

[sleeps1007]

When you enable both inbound and outbound filtering (Option 11 -> 4 ), then your speed will drop. If you only enable outbound filtering, then you will regain semi-normal speeds. This is normal, and by design, and been doing this since the beginning of time.

Ah ok I did change it and did see me speeds increase some. If it can't be helped then I either have to stick with it or remove it

 

[John Fitzgerald]

I did

Entware Installed?

NO or not using any QOS application? (don't need, should not be used)