sleeps1007
Regular Contributor
I have 1Gb speed and I average 850-950 Mb but when I turned on Skynet my speedtest would drop between 320-350Mb. Is there anything within Skynet that would allow me to get my original speeds?
When you enable both inbound and outbound filtering (Option 11 -> 4 ), then your speed will drop. If you only enable outbound filtering, then you will regain semi-normal speeds. This is normal, and by design, and been doing this since the beginning of time.I have 1Gb speed and I average 850-950 Mb but when I turned on Skynet my speedtest would drop between 320-350Mb. Is there anything within Skynet that would allow me to get my original speeds?
I didDid you set up a swap file on the ssd?
AX88U and I have the latest Merlin firmware. HW accel is onModel? Firmware? Sounds like HW acceleration maybe.
Ah ok I did change it and did see me speeds increase some. If it can't be helped then I either have to stick with it or remove itWhen you enable both inbound and outbound filtering (Option 11 -> 4 ), then your speed will drop. If you only enable outbound filtering, then you will regain semi-normal speeds. This is normal, and by design, and been doing this since the beginning of time.
Entware Installed?I did
Have you gone in and banned any IPs or countries in addition to what the default setup bans? At one time I had banned 22 countries and because of the large number of IPs this added I noticed a significant decrease in my speeds.I have 1Gb speed and I average 850-950 Mb but when I turned on Skynet my speedtest would drop between 320-350Mb. Is there anything within Skynet that would allow me to get my original speeds?
Nope everything is defaultHave you gone in and banned any IPs or countries in addition to what the default setup bans? At one time I had banned 22 countries and because of the large number of IPs this added I noticed a significant decrease in my speeds.
Yes Entware is installled. I've been using some of the apps from amtm for few years. I just decided to give Skynet a try and QoS is not enabledEntware Installed?
NO or not using any QOS application? (don't need, should not be used)
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!