Hi all! Noob here. Hoping someone can help diagnose this problem. Currently running a RT-AC86U on stock 386.51529, in router mode behind a cable modem that bridged. I want to close port 445, as described here, but it won't save for whatever reason. I put in the port number '445' in the destination port range, hit the "+", click Apply, the screen shows "Applying settings". When the screen refreshes, there's still "no data in table." In fact, I tried other ports, like 21, 22, with same result. Multiple tries, same result. Log does indicate the firewall restarted with the message "rc_service: httpd 25375:notify_rc restart_firewall", every time I did this.
I first tried the usual cold boot, then restore with "initialize all settings" checked, and finally bit the bullet and did a hard factory reset (method 2). None of which made any difference. My other option would be to redo the firmware again, but curious if anyone else is experiencing this issue. I'd swear it was working before.
Thanks.
I first tried the usual cold boot, then restore with "initialize all settings" checked, and finally bit the bullet and did a hard factory reset (method 2). None of which made any difference. My other option would be to redo the firmware again, but curious if anyone else is experiencing this issue. I'd swear it was working before.
Thanks.