nycelitemaster
Occasional Visitor
Hi All,
I have RT-AC68U and i finished setting up OpenVPN Server. I am able to connect to my VPN Server. The issue is when I am on an external network and I connect to VPN on my phone or any other device, I am able to access the router. However, I am not able to access anything else on the 192.168.1.x network. For example, I can't access any CUPS Server, or 3D Printer running on OctoPrint as they are on 192.168.1.x network and VPN assigns my device with 10.8.x.x IP. I have read multiple posts where it says enable push to Lan option. This option is no longer there. I also enabled the radio button for Static Route Option in LAN> Routes. But nothing working. Below is my configuration. I'd like to continue to use TUN and not looking to switch to TAP. Please assist.
Interface Type: TUN
Protocol: UDP
Server Port: 443
Authorization Mode: TLS
Username/Password Authentication: Yes
Username / Password Auth. Only: No
TLS control channel security: Disable
HMAC Authentication: Default
VPN Subnet / Netmask: 10.8.0.0 255.255.255.0
Advertise DNS to clients: No
Cipher Negotiation: Enable (with fallback)
The exported client ovpn file will require OpenVPN 2.4.0 or newer.
Negotiable ciphers: AES-128
Legacy/fallback cipher: AES-128-CBC
Compression: Disable
Log verbosity: 3
Manage Client-Specific Options: No
I have RT-AC68U and i finished setting up OpenVPN Server. I am able to connect to my VPN Server. The issue is when I am on an external network and I connect to VPN on my phone or any other device, I am able to access the router. However, I am not able to access anything else on the 192.168.1.x network. For example, I can't access any CUPS Server, or 3D Printer running on OctoPrint as they are on 192.168.1.x network and VPN assigns my device with 10.8.x.x IP. I have read multiple posts where it says enable push to Lan option. This option is no longer there. I also enabled the radio button for Static Route Option in LAN> Routes. But nothing working. Below is my configuration. I'd like to continue to use TUN and not looking to switch to TAP. Please assist.
Interface Type: TUN
Protocol: UDP
Server Port: 443
Authorization Mode: TLS
Username/Password Authentication: Yes
Username / Password Auth. Only: No
TLS control channel security: Disable
HMAC Authentication: Default
VPN Subnet / Netmask: 10.8.0.0 255.255.255.0
Advertise DNS to clients: No
Cipher Negotiation: Enable (with fallback)
The exported client ovpn file will require OpenVPN 2.4.0 or newer.
Negotiable ciphers: AES-128
Legacy/fallback cipher: AES-128-CBC
Compression: Disable
Log verbosity: 3
Manage Client-Specific Options: No