Padavan's Custom Firmware

[korenisko]

@korenisko not through the UI, but read this for some hints

https://www.neelc.org/routing-subnets-behind-a-asus-rt-n56u-with-padavan-firmware/

Thank You for helping me.
So with this command I will open firewall for accessing this subnet from wan?
iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth3 -j MASQUERADE

after this command I see, I open web ui and add route, but what ip to Gateway? 192.168.1.1 ? No two routers, only one.
thx again

 

[gingerbeardman]

I'd like to open a Guest AP on my N56U_B1. Not secure, I know, but it is for my Nintendo DS and it only supports WEP.

I've read that some. config can be put in /etc/storage/wlan/AP.dat - but what exactly does that look like? Does anybody have any ideas?

https://bitbucket.org/padavan/rt-n56u/issues/78/how-to-modify-the-config-to-enable-open

 

[Compstuff]

I needed to do some bench testing so I pulled out an old rt-n56u and did an initial setup with the stock firmware. All was going well but I wanted to see the effect of the Padavan firmware and the Master Browser setting in an environment with WIN 7 & WIN 10 along with some old and new synology NAS devices. I was testing the network browsing when SMB 1 is completely disabled on my PC's.

Unfortunately the Master Browser didn't give me what I was looking for but it was worth the test. I will leave the firmware as is but I clearly noticed that without a QOS feature in the firmware the bufferbloat is super high. On the stock firmware a simple QOS setting (95% of the full bandwidth up/down) gave "A" rating bufferbloat.

I'm definitely not a Linux guy but I do have colleagues that are yet I really don't see how to add the QOS feature set to the firmware. Is it available? OR is their a precompiled image with the QOS in it?

Thanks in Advance and Happy New Year to All

 

[Compstuff]

Just wondering if their was anyone that had any ideas on this? Thanks Again!

I needed to do some bench testing so I pulled out an old rt-n56u and did an initial setup with the stock firmware. All was going well but I wanted to see the effect of the Padavan firmware and the Master Browser setting in an environment with WIN 7 & WIN 10 along with some old and new synology NAS devices. I was testing the network browsing when SMB 1 is completely disabled on my PC's.

Unfortunately the Master Browser didn't give me what I was looking for but it was worth the test. I will leave the firmware as is but I clearly noticed that without a QOS feature in the firmware the bufferbloat is super high. On the stock firmware a simple QOS setting (95% of the full bandwidth up/down) gave "A" rating bufferbloat.

I'm definitely not a Linux guy but I do have colleagues that are yet I really don't see how to add the QOS feature set to the firmware. Is it available? OR is their a precompiled image with the QOS in it?

Thanks in Advance and Happy New Year to All

 

[Compstuff]

Guess this is dead thanks anyway

 

[RTN]

Compstuff > QoS: https://github.com/moonman/rt-n56u

Padavan-ng: https://github.com/Linaro1985/padavan-ng

padavan-ng/trunk/configs/boards/ASUS/

RT-N56U
RT-N56UB1
RP-AC56
RT-AC54U
RT-AC51U
RT-AC1200
RT-AC1200GU
RT-AC1200HP
RT-N14U
RT-N11P
RT-N11PB1
RT-N10C1

 

[mscbsg]

Hi, I am new to Padavan and I am using Asus RT-N56U. I have configured PPTP VPN client using the Web GUI but I would like it to auto start everytime I reboot the router, may I know if there is a way to do it? Like configure in the "Run After Router Started" script? Need help here as I do not know how to write the script too.

 

[gingerbeardman]

Try the extra steps in this video.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[gingerbeardman]

Padavan-ng: https://github.com/Linaro1985/padavan-ng

Are there downloadable binaries?

 

[korenisko]

My build here for rt-n56u vB:
https://uloz.to/!XUg47jOxyVYO/padavan-ng-rt-n56ub1-3-4-3-9l-100-trx

Fully working, using it.

 

[StealthShadow]

Hi guys, im new to padavan, i like the fw a lot.
I would like to know if there is a way to block IP/23 & 24 in the firewall settings.
For example,

iptables -A INPUT -s IP/24 -j DROP
iptables -A INPUT -s IP/23 -j DROP

Thank you in advance.

 

[StealthShadow]

.....
Is thread dead?
all ppl here leave?

 

[gingerbeardman]

Firmware is "old" by now, and seems to be in limited maintenance mode at bitbucket.

I suggest you'll have better luck trying to find your answer with Google. Good luck!

 

[Md. Ariful Huq]

Hello I cant flash the N111P PADAVAN firmware on N12+ B1, Always ASUS web firmware upgrade give me error as firmware ugrade is unsuccessful.
I need an expert help.

 

[gingerbeardman]

Hello I cant flash the N111P PADAVAN firmware on N12+ B1, Always ASUS web firmware upgrade give me error as firmware ugrade is unsuccessful.
I need an expert help.

Flash padavan nano version. Maybe try Padavan base version afterwards.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=994104

 

[Md. Ariful Huq]

Flash padavan nano version. Maybe try Padavan base version afterwards.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=994104

Hi, I have already gone thorugh that Forum, I have tried nano version first but asus rejecting it.
Also tried after downgrading my official firmware to a version of 2018. And flashing the padavan using asus recovery tool, still rejects, I need serious help.

I want to move to padavan as the router has some disconnection issues which is common for the router.

 

[gingerbeardman]

I can't help you any further, sorry

 

[con16]

3.4.3.9L-100 of the difference
gcc7.4
BusyBox v1.30.1
dnsmasq 2.80 ......more

padavan-ng change to
https://gitlab.com/padavan-ng/padavan-ng

Russian Forum discuss
https://forum.ixbt.com/topic.cgi?id=14:64851

3.4.3.9L-100 Compile firmware
https://dimez.ru/padavan-ng/current/asus/
model:
RT-AC1200GU
RT-N56U and RT-N56U b1
RT-N11P b1



Another compilation
https://bitbucket.org/dirkp78/update/downloads/
Compiler reference
padavan-ng and hanwckf
model:
N56U and N65U


hanwckf
https://github.com/hanwckf/rt-n56u

 

[opav]

Thank you for the nice summary, have been looking for a updated firmware, I do see a L-100 on dirkp78's link.

Looking at the devs commits, there was a burst of activities from end 2018 to early 2019. Recently all seems to have quiet down. Hopefully more dev will continue to keep Padavan firmware up to date.

 

[con16]

Hanwckf version
https://github.com/hanwckf/rt-n56u/commit/27f7cab3ed02b99af2dcbe0cb9fc65e29ad5bbb5
fix CVE-2019-11477~79
Wait for dirkp78 to compile