Dismiss Notice

Welcome To SNBForums

SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.

If you'd like to post a question, simply register and have at it!

While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!

Featured QNAP’s QTS 4.3.4 Adds Snapshot Support To TS-1635 NAS

Discussion in 'General NAS Discussion' started by Julio Urquidi, Nov 12, 2017.

  1. Julio Urquidi

    Julio Urquidi News Editor

    Joined:
    Apr 12, 2016
    Messages:
    252
    qnap-qts-snapshot.jpg
    The latest beta to QNAP’s NAS operating system enables snapshots on the company’s 10 GbE NAS, the Annapurna Labs quad-core powered TS-1635.

    In general, the update adds support for ARM-based systems and lowers memory requirements for snapshots to 1 GB. QTS 4.3.4 allows the SMB targeted TS-1635 to back up its own snapshots, and snapshots from other NAS devices using Snapshot Replica, taking full advantage of the NAS’ sixteen drive capacity.

    For more information on the TS-1635 and QTS 4.3.4, check out the QNAP website.
     
  2. sfx2000

    sfx2000 Part of the Furniture

    Joined:
    Aug 11, 2011
    Messages:
    11,658
    Location:
    San Diego, CA
    QTS 4.3.3 had snapshot capability already - looks like QTS 4.3.4 makes it more accessible...
     
    L&LD likes this.
  3. Meteora

    Meteora New Around Here

    Joined:
    Sep 17, 2008
    Messages:
    3
    Snapshot is available on most x86-based QNAP NAS, but not ARM-based NAS. but since 4.3.4 some ARM-based NAS (with an Annapurna Labs processor and at least 1GB memory) can do snapshot too.
     

Share This Page