qnap

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.
  1. Kashif Tasneem

    Will adding a switch slow down my NAS local transfers?

    Hi. I have run out of ethernet ports on my router. So, I am planning to purchase an unmanaged gigabit switch. I will connect 1 port of switch to one of the ethernet ports of the router and then connect remaining ethernet ports of the switch to the clients. Correct? So, switch will be connected...
  2. sentinelvdx

    [Issue] HBS3 not synching all subfolders/files

    Hi, I have recently created a backup job which performs an updated copy of my NAS to Google Cloud. What I've noticed on a quick view that from 4 folders I'm backing up, in one of them, there's a subfolder missing and I don't know why... Did anyone had this issue before? Is there any way to...
  3. L&LD

    QNAP QSW-1105-5T Switch

    https://www.anandtech.com/show/15916/at-last-a-25gbps-consumer-network-switch-qnap-releases-qsw11055t-5port-switch 5 Port unmanaged, no fan, 2.5GbE operation on all five of its RJ45 Ethernet ports for about $100 ($20/port). Time to upgrade everything again. :)
  4. Kashif Tasneem

    Link Aggregation/ Port Trunking not working with Asus AX-11000 and Qnap TS-451+

    Hi. I followed the following guides of both Qnap and Asus to setup link aggregation but still it is not working. When I transfer files, only 1 adapter is used even though NAS shows I have setup Link aggregation correctly...
  5. G

    Help setting up NUT (Network UPS Tools) on a Merlin router

    I have an APC Back-UPS connected via USB to my Qnap NAS but I'd like to move it to my RT-AC87U running 384.13_1, which would then notify power events to the NAS, so I can keep monitoring the UPS status from the router after the NAS has shut itself down. The Qnap uses NUT for this so I've...
  6. Julio Urquidi

    QNAP Introduces 5GbE Connectable NAS Series

    The TVS-x72N series of tabletop tower NAS products are powered by Intel’s Core i3-8100T quad-core 3.1. GHz processor and are upgradeable up to 32 GB of DDR4 memory. Available in 6-bay or 8-bay models, these new NAS products get a single 5GBASE-T LAN port for five-times faster throughput than...
  7. TheLostSwede

    QNAP QSW-308 series of "10Gbps" switches

    QNAP has launched a pair of new "10Gbps" switches at Computex and I figured I'd share a quick snap here of the two new models. Both models have three SFP+ ports and the 1C model has one shared NBASE-T port. Both models also have a standard 8-port Gigabit switch. The only plus point is that both...
  8. J

    Disable link aggregation/LACP on RT-AC68U & QNAP LACP setting

    Hi, I have followed this wiki to enable link aggregation/LACP on RT-AC68U and connect it with QNAP TS-453be (by following this instruction). I have started to notice strange things (unable to access the NAS and some of the services are failed to run/inaccessible from local network) - Note: I...
  9. Karajorma

    Weird issue when using VPN on the network.

    I have a Asus RT-AC88U as my router connected to a China Telecom Huawei Echolife HG8120C cable modem. The majority of the time my setup seems to work well but I have had intermittant problems when watching videos over a SAMBA connection to other devices on the network where the video will pause...
  10. Julio Urquidi

    New QNAP 4-Bay Storage Expansion Unit Works With PCs and NAS Devices

    Using USB 3.0 Type-C, QNAP’s 4-bay hardware RAID storage expansion device, the TR-004, can be attached to either a personal computer or a NAS, increasing storage while supporting RAID 0/1/5/10 and JBOD configurations. RAID settings, as well as disk health, logging, and firmware updates are all...
  11. Julio Urquidi

    QNAP Releases TBS-453DX NASbook For The Mobile Worker

    Designed for workers on the go, QNAP’s portable TBS-453DX NASbook is a portable caching NAS device. It uses four M.2 2280 SATA SSDs (not included) for storage and is powered by Intel’s 14nm Celeron J4105 quad-core 1.5 GHz processor and 4 GB/ 8 GB DDR4 dual-channel RAM (upgradable to 8 GB)...
  12. Julio Urquidi

    QNAP Intros Xeon-Powered TS-x83XU Enterprise NAS Line-Up

    The new QNAP TS-x83XU series of enterprise NAS products is comprised of seven different models, each powered by an Intel Xeon E processor and ECC DDR4 memory (upgradeable to 64 GB). Ranging from 8-bay to 24-bay models, the TS-x83XU series NAS supports hot-swappable 3.5”/2.5” SATA HDDs/SSDs and...
  13. Dubhead

    Replicating data from Synology to QNAP NAS

    Hello, I am looking for the most efficient way to move my data from my current Synology DS1813+ NAS to my brand new QNAP TVS-951X NAS. The Synology is currently configured with link aggregation for two of the Ethernet (RJ45) ports on the back of it and connected directly to my router which...
  14. sfx2000

    QNAP - High End...

    I suppose some folks have been puzzled on the recent QNAP 3-bay NAS boxes, but they've been busy on other things as well... QNAP Mustang-200 Compute Card - this is a PCI-e Card that is plugged into a QNAP NAS or PC - completely standalone and runs QTS...
  15. Skeptical.me

    QM2-2S M.2 2280 SSD PCIe Card opinions?

    I've just purchased the QM2-2S card for my TS-253Be and I'm just wondering if anyone here has installed it or the pricier QM2-2S10G1T (edit : not compatible) or QM2-2P10G1T with 10 GbE Network port. Have you found significant performance increases as advertised? I chose the cheaper option as I...
  16. giopas

    Asus RT-AC87U (WRT-Merlin) and IPv6

    Hello, Today I have contacted by my ISP to propose a new broadband connection. I currently have a public IPv4 line connected to my ISP modem which connects to my ASUS RT-AC87U with AsusWRT-Merlin 384.7. Behind the router I have a couple of QNAP NASes and one Vu+ decoder that I can access...
  17. Julio Urquidi

    QNAP Adds High-End SOHO NAS To Its 3-Bay RAID 5 Line-Up

    Targeting the small office/home office crowd, QNAP’s 3-bay TS-351 is powered by an Intel Celeron J1800 dual-core 2.41 GHz processor (burst up to 2.58 GHz) and available in 2 GB and 4 GB dual-channel DDR3L models (both upgradable to 8 GB). The TS-351 also comes with two M.2 PCIe slots supporting...
  18. Julio Urquidi

    QNAP’s TS-332X Includes 10 GbE SFP+, Three M.2 SSD Slots

    Powered by QNAP’s QTS operating system and AnnapurnaLabs Alpine AL-324 quad-core 1.7 GHz Cortex-A57 processor, the 3-bay TS-332X tower NAS is available in two models configured with either 2GB or 4GB DDR4 RAM (expandable to 16 GB). Along with two GbE ports, the TS-332X comes with a 10 GbE SFP+...
  19. Julio Urquidi

    QNAP Announces Home/SOHO NAS With PCIe Expansion

    The dual-bay QNAP TS-215B NAS, designed for home and small office use, is powered by Intel’s 14nm Celeron J3355 dual-core 2.0GHz processor, 2 GB or 4 GB dual-channel DDR3L SODIMM RAM (upgradable to 8GB) and supports 3.5”/2.5” SATA HDDs or SSDs. TS-215B gives QNAP customers a single PCIe slot...
  20. thiggins

    QNAP Looking For Wireless Adapter Testers

    Received this email blast this morning. Testers get a free adapter. To help spread the word about the many benefits of using the QWA-AC2600 wireless adapter, QNAP are looking for QNAP NAS users to join the QWA-AC2600 Public Testing Program. Sign up now, and if you are one of the 60 entrants...
Top