[Release] Asuswrt-Merlin 384.16 (and 384.13_6) are now available

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.
Status
Not open for further replies.

AntonK

Very Senior Member
Tested mine now with everything off and I’m still getting the error . I reverted back to stock firmware and now I’m stuck on 2.066 on my personal Ax88u router
I'm getting the error now as well. Nothing has been changed in my WAN DNS for , like, forever.
 

jerry6

Very Senior Member
UPDATED MY RT5300 working perfectly as usual , thanks ! AC3200 is working well as well on the newest FW
 

JSinFCVA

Regular Contributor
Mine says 2.170 on 86U. I've gone to a very basic WAN DNS config using 8.8.8.8 and 8.8.4.4 as my hard coded DNS servers (bypassing my ISP DNS). Still getting signature update failure. LAN clients using router as DNS are working fine. So not sure what the signature update failure really means in the grand scheme of things.

Attached is the system log showing the 2 lines in the log for each signature update request.
UPDATE. After trying signature update 3 or 4 times over the last few hours, it Finally updated successfully. No configuration changes. So the issue was NOT the firmware. New signature is 2.172 Updated : 2020/04/08 21:32
 

fields987

Regular Contributor
UPDATE. After trying signature update 3 or 4 times over the last few hours, it Finally updated successfully. No configuration changes. So the issue was NOT the firmware. New signature is 2.172 Updated : 2020/04/08 21:32
Thanks. I was able to update my signatures to 2.172 as well with no config changes.
 

LimJK

Very Senior Member
UPDATE. After trying signature update 3 or 4 times over the last few hours, it Finally updated successfully. No configuration changes. So the issue was NOT the firmware. New signature is 2.172 Updated : 2020/04/08 21:32

Same here, I tried a few times, including login out, login ... finally, I got this :)
For me I by pass my ISP DNS and use Cloudflare (1.1.1.1 and 1.0.0.1) instead on my WAN GUI page.

Screenshot 2020-04-09 at 10.39.03.png
 

AntonK

Very Senior Member
Same here, I tried a few times, including login out, login ... finally, I got this :)
For me I by pass my ISP DNS and use Cloudflare (1.1.1.1 and 1.0.0.1) instead on my WAN GUI page.

View attachment 22474
Successful update just now.
Annotation 2020-04-08 225748.jpg
 

Alfsu

Regular Contributor
Upgraded AC86U on top of .15 without a blip!
 

New2This

Senior Member
Using Cloudflare dns finally was able to update

Updated.png
 

XIII

Very Senior Member
Signatures were 2.170 since 2020/03/20.

After clicking on the "Check" button I get "Signature update completely", but the version remains 2.170 on my AC86U...
 
Last edited:

axaro1

Occasional Visitor
Signature updated succesfully to 2.172
 

teo1966

Occasional Visitor
Signatures were 2.170 since 2020/03/20.

After clicking on the "Check" button I get "Signature update completely", but the version remains 2.170 on my AC86U...
me also whit a RT-AC88U AND 384.16
 

pirx73

Senior Member
Status
Not open for further replies.

Similar threads

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top