What's new

[Release] Asuswrt-Merlin 384.16 (and 384.13_6) are now available

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Status
Not open for further replies.
UPDATED MY RT5300 working perfectly as usual , thanks ! AC3200 is working well as well on the newest FW
 
Mine says 2.170 on 86U. I've gone to a very basic WAN DNS config using 8.8.8.8 and 8.8.4.4 as my hard coded DNS servers (bypassing my ISP DNS). Still getting signature update failure. LAN clients using router as DNS are working fine. So not sure what the signature update failure really means in the grand scheme of things.

Attached is the system log showing the 2 lines in the log for each signature update request.
UPDATE. After trying signature update 3 or 4 times over the last few hours, it Finally updated successfully. No configuration changes. So the issue was NOT the firmware. New signature is 2.172 Updated : 2020/04/08 21:32
 
UPDATE. After trying signature update 3 or 4 times over the last few hours, it Finally updated successfully. No configuration changes. So the issue was NOT the firmware. New signature is 2.172 Updated : 2020/04/08 21:32
Thanks. I was able to update my signatures to 2.172 as well with no config changes.
 
UPDATE. After trying signature update 3 or 4 times over the last few hours, it Finally updated successfully. No configuration changes. So the issue was NOT the firmware. New signature is 2.172 Updated : 2020/04/08 21:32

Same here, I tried a few times, including login out, login ... finally, I got this :)
For me I by pass my ISP DNS and use Cloudflare (1.1.1.1 and 1.0.0.1) instead on my WAN GUI page.

Screenshot 2020-04-09 at 10.39.03.png
 
Same here, I tried a few times, including login out, login ... finally, I got this :)
For me I by pass my ISP DNS and use Cloudflare (1.1.1.1 and 1.0.0.1) instead on my WAN GUI page.

View attachment 22474
Successful update just now.
Annotation 2020-04-08 225748.jpg
 
Upgraded AC86U on top of .15 without a blip!
 
Using Cloudflare dns finally was able to update

Updated.png
 
Signatures were 2.170 since 2020/03/20.

After clicking on the "Check" button I get "Signature update completely", but the version remains 2.170 on my AC86U...
 
Last edited:
Signature updated succesfully to 2.172
 
Signatures were 2.170 since 2020/03/20.

After clicking on the "Check" button I get "Signature update completely", but the version remains 2.170 on my AC86U...
me also whit a RT-AC88U AND 384.16
 
Status
Not open for further replies.

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top