Skynet ssh firewall

[randomName]

So simply entering firewall in ssh won't open up skynet anymore? I know it can be accessed also via amtm but sometimes I use to simply type firewall and that would open it up. Did that change?

Thanks

 

[MvW]

No, that hasn't changed:

ASUSWRT-Merlin RT-AC86U 386.2_2 Tue Apr 13 21:13:00 UTC 2021
marco@RT-AC86U:/tmp/home/root# firewall
################################################################################
#                                                                              #
#                  ███████╗██╗  ██╗██╗   ██╗███╗   ██╗███████╗████████╗    ██╗ #
#                  ██╔════╝██║ ██╔╝╚██╗ ██╔╝████╗  ██║██╔════╝╚══██╔══╝    ██║ #
#                  ███████╗█████╔╝  ╚████╔╝ ██╔██╗ ██║█████╗     ██║       ██║ #
#                  ╚════██║██╔═██╗   ╚██╔╝  ██║╚██╗██║██╔══╝     ██║       ╚██╗#
#                  ███████║██║  ██╗   ██║   ██║ ╚████║███████╗   ██║        ╚██#
#                  ╚══════╝╚═╝  ╚═╝   ╚═╝   ╚═╝  ╚═══╝╚══════╝   ╚═╝         ╚═#
#                                                                              #
#                                 Router Firewall And Security Enhancements    #
#                             By Adamm -  https://github.com/Adamm00/IPSet_ASUS#
#                                            19/03/2021 - v7.2.4               #
################################################################################


================================================================================


Router Model; RT-AC86U
Skynet Version; v7.2.4 (19/03/2021) (0380669c11572e222d1fd2f7531d7bfa)
iptables v1.4.15 - (eth0 @ 192.168.1.1)
ipset v7.6, protocol version: 7
IP Address; (000.000.000.000)
FW Version; 386.2_2 (Apr 13 2021) (4.1.27)

Do you still have Entware installed? I'm not sure whether that's a requirement for Skynet, but it is requirement for several commands to be ran regardless in which directory you are, if I'm not mistaken.

 

[MvW]

As an alternative you can run

/jffs/scripts/firewall

or

sh /jffs/script/firewall

 

[randomName]

No, I stopped using entware after the 386.2 firmware update as I only used it for Cake.

Ok, it's working now. After I reinstalled Skynet I typed firewall, several times, and it said it was not found. This has been the second time that's happened. Weird.

 

[MvW]

No, it's because you removed Entware. Without Entware you have to use the whole path (or you can make a symbolic link in your admin home directory, but that will probably not survive a reboot. There are probably other ways to create some kind of symlink but my Linux-skills are a bit rusty, so maybe someone else has a better suggestion.

 

[MvW]

Found it!

In /jffs/configs/profile.add, you must add an alias. Add the following line:

alias firewall="sh /jffs/scripts/firewall" # Skynet

 

[MvW]

It might take a new remote login or maybe even a reboot to become functional.

 

[randomName]

It works without using the whole string.. I think i was like that before but lately just typing firewall will open up skynet.