VPNMON VPNMON-R3 v1.7.0 -Sep 20, 2025- Monitor OpenVPN/Wireguard WAN/Dual-WAN Health & Random Reset Multiple Connections (Available in AMTM!) - v1.8.0 Beta3

[Viktor Jaep]

Perhaps it would be less confusing if under option 14 you removed the word "speed" and replaced it with another term such as "throughput" in both the option and the description of what is being measured. Just my two cents.

Great suggestion! Thanks @CaptainSTX

 

[CaptainSTX]

Great suggestion! Thanks @CaptainSTX

Your welcome. Incidentally when VPMON was improved to include monitoring WG VPN clients and it appeared that they were not as rock solid as I once thought they were, and I had to adjust VPMON to minimize the restarts and reduce the email notifications it turns out that the root of the problem was a new modem I put in service at about the same time. With the ISPs modem both my WAN and WG VPN connections are very stable.

 

[Viktor Jaep]

Your welcome. Incidentally when VPMON was improved to include monitoring WG VPN clients and it appeared that they were not as rock solid as I once thought they were, and I had to adjust VPMON to minimize the restarts and reduce the email notifications it turns out that the root of the problem was a new modem I put in service at about the same time. With the ISPs modem both my WAN and WG VPN connections are very stable.

Man... Now I'm going to have to rip out all that code again! Lol

Nahhh! Glad to hear things are more stable for you with the equipment change! Out of my different WG providers I use, I can definitely tell that Nord has the most problems keeping a clean line going. I'm kinda glad I added the recovery timeouts, because that's really helped it from not reconnecting each time Nord had a hiccup.

 

[scootertramp]

VPNMON-R3 - v1.8.0b3

While getting things set-up after a router replacement I am seeing a [: bad number% ] next to the timer loop display when it
times out. I am also not seeing any rx/tx on the vpn slots. Should be seeing something on vpn1 slot for sure . Nothing is running thru the WG
slots yet.

 

[Viktor Jaep]

VPNMON-R3 - v1.8.0b3

While getting things set-up after a router replacement I am seeing a [: bad number% ] next to the timer loop display when it
times out. I am also not seeing any rx/tx on the vpn slots. Should be seeing something on vpn1 slot for sure . Nothing is running thru the WG
slots yet.

That's definitely odd. Does it show any kind of 60 second counter? Can you show a copy of your .cfg file entries?

If the timer loop isn't even working, then you probably won't see any bandwidth stats. I need to take a look at my code to see if there's a requirement for a slot to be "monitored" before it shows these stats, or not. I will check this evening.

 

[scootertramp]

That's definitely odd. Does it show any kind of 60 second counter? Can you show a copy of your .cfg file entries?

If the timer loop isn't even working, then you probably won't see any bandwidth stats. I need to take a look at my code to see if there's a requirement for a slot to be "monitored" before it shows these stats, or not. I will check this evening.

@Viktor Jaep

The timer loop displays fine. It's just when it gets to 100% I get that bad number showing.
I have since finished setting up monitoring and it is still there.

 

[Viktor Jaep]

@Viktor Jaep

The timer loop displays fine. It's just when it gets to 100% I get that bad number showing.
I have since finished setting up monitoring and it is still there.

Sounds like it might be a calculation issue on my end after the timer is up. I'll dive back into this and double-check everything.

 

[scootertramp]

VPNMON-R3 - v1.8.0b3

While getting things set-up after a router replacement I am seeing a [: bad number% ] next to the timer loop display when it
times out. I am also not seeing any rx/tx on the vpn slots. Should be seeing something on vpn1 slot for sure . Nothing is running thru the WG
slots yet.

@Viktor Jaep

Disregard my post about not seeing rx/tx data. It is showing fine now. My feeble mind neglected to recall you
had told me this is not that unusual .