WANFailover WAN Failover v2.2.0 Release

[Kingp1n]

Hoping someone can help. Failover occurs but...
1. When I test (pull the Primary cable) ASUS's Dual WAN shows the connection fails over but when I reconnect the Primary cable it never fails back. It just shows the Primary as a hot-spare?
2. After failover, traffic is not routed to my LTE device.

device config...
<< ASUS GT-AX6000 >>
Primary WAN (WAN): Cable Modem
Secondary WAN (LAN-1) *to RUTX11 LAN-1 for failover
- Dual WAN enabled (Disabled: Allow Failback, DNS Query, Ping)
- Ranger scripts, default settings

<< RUTX11 - LTE modem >>
WAN port (WAN) : Static IP 192.168.2.2 * to network for management UI
LAN port (LAN-1) : Static IP 192.168.3.2 *to ASUS LAN-1 for failover

I would recommend reporting any issues thru GitHub:
Ranger802004/asusmerlin https://share.google/mGwZlu473PsMcl7ov

 

[Livin]

I would recommend reporting any issues thru GitHub:
Ranger802004/asusmerlin https://share.google/mGwZlu473PsMcl7ov

I saw little to no activity on Github, and assumed that it was only for bug reports. Are you saying this is a bug? I thought it was my config problem but after now spending a goo 6 hrs on this I'm finding it never fails-over (it hangs) or fails-back (even though ASUS says it is connected - no traffic flows)... until I restart the scripts, then it fails back and traffic flows.