Wireless Report for AIMesh v1.08 - Mar 12, 2026

[JB_1366]

As long as your using it to cross reference specific device roles you wish to target as I described above, you'll be fine going forwards. It should exclude devices like media bridges once correctly implemented.

yes, anything other than >2, ignored

 

[ExtremeFiretop]

yes, anything other than 2, ignored

Happy to help where I can. So with a target value of 2, your script will only detect AiMesh nodes, and not APs/repeaters. If the script is designed to work on APs/Repeaters, than you should also allow values of 3.

Maybe something to test at some point? Unless of course you already know how it behaves on those devices. For our script we only cared about AiMesh devices, so we strictly look for value 2.

 

[visortgw]

v1.0.6-install option for °F or °C
@visortgw - only 1 node needs to authenticate for install. let me know if it worked.

​

@JB_1366 : It continues to prompt for password of non-Merlin AiMesh node after confirming installation complete:

==================================================
              WIRELESS REPORT AIMESH             
==================================================
 STATUS: [Ready] Latest available is v1.0.6
==================================================

  (1)  Install Wireless Report
  (2)  Uninstall Wireless Report
  (3)  Check/Update Latest Script
  (4)  Temperature Unit: °F(def) or °C
  (e)  Exit

==================================================
 Selection: 3
[!] Wireless Report is not installed.
 Would you like to install it now? (y/n): y
[*] Checking for USB Storage...
[+] USB Found: Using /tmp/mnt/TheS1RsUSB/gen_report for history.
[*] Verifying Passwordless SSH Environment...
[*] Testing Passwordless SSH to Node (192.168.222.254) on port 22022... AUTHENTICATED
[*] Testing Passwordless SSH to Node (192.168.222.253) on port 22022... AUTHENTICATED
[*] Testing Passwordless SSH to Node (192.168.222.250) on port 22022... AUTHENTICATED
[*] Testing Passwordless SSH to Node (192.168.222.252) on port 22022... FAILED
[*] Processing Wireless Report Files...
[*] Mounting Wireless Report TAB to Wireless menu...

SUCCESS: Installation complete!

Press [Enter] to [email protected]'s password: [email protected]'s password:

 

[JB_1366]

@JB_1366 : It continues to prompt for password of non-Merlin AiMesh node after confirming installation complete:

==================================================
              WIRELESS REPORT AIMESH            
==================================================
 STATUS: [Ready] Latest available is v1.0.6
==================================================

  (1)  Install Wireless Report
  (2)  Uninstall Wireless Report
  (3)  Check/Update Latest Script
  (4)  Temperature Unit: °F(def) or °C
  (e)  Exit

==================================================
 Selection: 3
[!] Wireless Report is not installed.
 Would you like to install it now? (y/n): y
[*] Checking for USB Storage...
[+] USB Found: Using /tmp/mnt/TheS1RsUSB/gen_report for history.
[*] Verifying Passwordless SSH Environment...
[*] Testing Passwordless SSH to Node (192.168.222.254) on port 22022... AUTHENTICATED
[*] Testing Passwordless SSH to Node (192.168.222.253) on port 22022... AUTHENTICATED
[*] Testing Passwordless SSH to Node (192.168.222.250) on port 22022... AUTHENTICATED
[*] Testing Passwordless SSH to Node (192.168.222.252) on port 22022... FAILED
[*] Processing Wireless Report Files...
[*] Mounting Wireless Report TAB to Wireless menu...

SUCCESS: Installation complete!

Press [Enter] to [email protected]'s password: [email protected]'s password:

did it still install?

 

[visortgw]

did it still install?

Now that I checked further, yes it did! Thanks.

 

[JB_1366]

Now that I checked further, yes it did! Thanks.

v1.0.7- fix install

 

[visortgw]

Absolutely beautiful! Question: Is there anything that you can do to keep everything to one line in the side by side comparison? It appears that those "phantom" SSIDs are causing it to go to two lines for the primary router.

 

[jksmurf]

Absolutely beautiful!

It’s good isn’t it !

If you get a chance have a wee look at the suggestions I made here (edited a few times), a few to do with screen real estate, see if there’s anything you (or anyome else think is a good idea) consensus wise.

At the end of the day it’s @JB_1366 baby and the improvements are more cosmetic than functional (deg C to F already addressed thank you), but I think it would enhance a great little Addon.

 

[visortgw]

Absolutely beautiful! Question: Is there anything that you can do to keep everything to one line in the side by side comparison? It appears that those "phantom" SSIDs are causing it to go to two lines for the primary router. View attachment 70714
View attachment 70715

In looking at the data more, I see some inconsistencies between SSID and BAND:

1. Subnet 222 (primary network) should be either 5 or 6 GHz — 2.4 GHz is enabled, but nothing connects using it at the present time.
2. Subnet 52 (GetYourOwnDarnInternet) should be 2.4 GHz only.
3. Subnet 53 (Searching...) should be 2.4 GHz only.
4. Subnet 54 (TheS1RsGuests) should be 5 GHz only.

 

[JB_1366]

In looking at the data more, I see some inconsistencies between SSID and BAND:

1. Subnet 222 (primary network) should be either 5 or 6 GHz — 2.4 GHz is enabled, but nothing connects using it at the present time.
2. Subnet 52 (GetYourOwnDarnInternet) should be 2.4 GHz only.
3. Subnet 53 (Searching...) should be 2.4 GHz only.
4. Subnet 54 (TheS1RsGuests) should be 5 GHz only.

looks like you need to reinstall, node titles are wrong, AI made some boo boos when we were fixing schmit, if you click on ssid, its toggled with iface, that will show wl0.1 etc, to check if 2.4g is wrong.. ip/mac-add is also a toggle. I thought i had filtered out those long hex ssids.will look into it.

v1.0.8-fix hex/backhaul on ssid scans

 

[visortgw]

looks like you need to reinstall, node titles are wrong, AI made some boo boos when we were fixing schmit, if you click on ssid, its toggled with iface, that will show wl0.1 etc, to check if 2.4g is wrong.. ip/mac-add is also a toggle. I thought i had filtered out those long hex ssids.will look into it.

Thanks for your quick responses. Reinstalling (uninstall followed by install) doesn't change anything. Bands still are showing impossible values based upon configuration.