Wireless Report for AIMesh v1.2.8 - [Mar-31-2026]

[scootertramp]

Upgraded to 1.25 and no longer seeing nodes. Ran uninstall then reinstall same result.

 

[junior120872]

Upgraded to 1.25 and no longer seeing nodes. Ran uninstall then reinstall same result.

I as well have lost visibility to my nodes.

 

[JB_1366]

v1.2.6-reverted ssh adjustment

 

[jksmurf]

Upgraded to 1.25 and no longer seeing nodes. Ran uninstall then reinstall same result.

I as well have lost visibility to my nodes.

That’s odd. I have two independent networks and both show all the nodes after the v1.25 update.

The only oddity on update was it seemed to stop the script at a certain point but only on one network. Running wr_install again worked fine.

 

[scootertramp]

v1.2.6-reverted ssh adjustment

All better.........

 

[JGrana]

All better.........

Hmm, not better here. I have 3 nodes and it now only picks up 1.

 

[JB_1366]

Hmm, not better here. I have 3 nodes and it now only picks up 1.

reboot main router, should fix node detection.

 

[JB_1366]

curl -sL --retry 3 https://raw.githubusercontent.com/JB1366/Wireless_Report/main/wr_install.sh -o /tmp/wr_install.sh && sh /tmp/wr_install.sh

v1.2.7-fixed LOAD/TEMP detection colors, got hosed when i added all-devices view, never caught the error. 'wr_install.sh' also updated, so use curl to update.

 

[scootertramp]

curl -sL --retry 3 https://raw.githubusercontent.com/JB1366/Wireless_Report/main/wr_install.sh -o /tmp/wr_install.sh && sh /tmp/wr_install.sh

v1.2.7-fixed LOAD/TEMP detection colors, got hosed when i added all-devices view, never caught the error. 'wr_install.sh' also updated, so use curl to update.

No longer seeing temp and load for each mesh node on the main view.
You can see temp and load for all devices on the all device view.

 

[JB_1366]

No longer seeing temp and load for each mesh node on the main view.
You can see temp and load for all devices on the all device view.

v1.2.8-fixed temp/load issue