Hello people . I have the following setup :
AX86U flashed with 386.1 Merlin firmware , set up from scratch .
2 Intel AX200 Wifi6 clients connecting to 5Ghz band 160mhz .
Both clients are on the latest Intel driver version 22.20.0.6 .
Following issue appeared already a couple of times , where clients lose their wifi connection and can not connect to the AX86U anymore for some time after it happens . (not on 5Ghz band and not on 2.4Ghz band) , it sees the SSID's but trying to join them results in an error saying that it can not connect . Minutes after , the connection is possible again .
The clients -as far as i checked- do not necessarily get this error at the same time .
A few screenshots .
Errors from the client system log
Settings in the router :
PRO
What I have done so far on the client side on 1 pc is :
UN-tick "allow the computer to turn off this device to save power" , in the device manager wifi card properties .
In power options for PCI-Express - Link state power management : set from moderate to OFF .
Still monitoring if the change does anything .
The error occurs between 2 times a day to once every 2 days usually .
Any advise on how to tackle the issue would be much appreciated .
AX86U flashed with 386.1 Merlin firmware , set up from scratch .
2 Intel AX200 Wifi6 clients connecting to 5Ghz band 160mhz .
Both clients are on the latest Intel driver version 22.20.0.6 .
Following issue appeared already a couple of times , where clients lose their wifi connection and can not connect to the AX86U anymore for some time after it happens . (not on 5Ghz band and not on 2.4Ghz band) , it sees the SSID's but trying to join them results in an error saying that it can not connect . Minutes after , the connection is possible again .
The clients -as far as i checked- do not necessarily get this error at the same time .
A few screenshots .
Errors from the client system log
Settings in the router :
PRO
What I have done so far on the client side on 1 pc is :
UN-tick "allow the computer to turn off this device to save power" , in the device manager wifi card properties .
In power options for PCI-Express - Link state power management : set from moderate to OFF .
Still monitoring if the change does anything .
The error occurs between 2 times a day to once every 2 days usually .
Any advise on how to tackle the issue would be much appreciated .