Asuswrt-Merlin 378.52 is available

RMerlin · Apr 23, 2015

laser said:
RMerlin
I have a 2 AC68P - Setup as an AP using 378.52. I am unable to get the time set on one of the routers and the log is full of Start NTP Update messages (Approx every 30 seconds) I have reset it to factory defaults and set it up manually. The routers are configure identically so it is baffling why one works and the other not.

If I try to ping the NTP server or any website for that matter from network tools it always says bad address.
I have searched the forum for this type of error and have seen your responses to those instances but still have been able to resolve the issue.

Is there any command that I could enter to set the time manually?

Thanks for all the work you put into the firmware and support here on the Forum.

AFAIK, APs can't directly access the Internet, which is why the other network tools also fail.

Blinkyz · Apr 23, 2015

tuntun said:
Hi RMerlin, any indication of ver .53 for beta level testing? Thx

Omg , the same silly question ever and ever. You never gonna have any answers for that question.This is an HOOBY for merlin , so wait or go here everyday and to see developpement

https://github.com/RMerl/asuswrt-merlin

drivetheory · Apr 23, 2015

there seems to be a bug in RT-AC68U_378.52_2.trx in the PPTP VPN section, once multiple pptp accounts are created and applied, and then new accounts are added the password field shows the password with the username right after it in existing accounts.

EDIT: it seems to keep appending the username to the password (of existing accounts) each time a new account is created and applied. or if an account is removed and then apply clicked, or when an account is removed and a new account added then apply clicked

lbradio · Apr 23, 2015

drivetheory said:
there seems to be a bug in RT-AC68U_378.52_2.trx in the PPTP VPN section, once multiple pptp accounts are created and applied, and then new accounts are added the password field shows the password with the username right after it in existing accounts.

EDIT: it seems to keep appending the username to the password (of existing accounts) each time a new account is created and applied. or if an account is removed and then apply clicked, or when an account is removed and a new account added then apply clicked

I do have the same experience, but thought it had to do something with the '@' I've used in the password. After changing the password I haven't seen it anymore.

denali · Apr 23, 2015

denali said:
Using 378.52_2 on a RT-AC66R. Anytime I go into the admin panel, it appears the http server in the unit is dying. Anyone else experiencing that or am I the Lone Ranger out here?

This problem was resolved by turning off HTTPS for the admin panel.

RMerlin · Apr 24, 2015

drivetheory said:
there seems to be a bug in RT-AC68U_378.52_2.trx in the PPTP VPN section, once multiple pptp accounts are created and applied, and then new accounts are added the password field shows the password with the username right after it in existing accounts.

EDIT: it seems to keep appending the username to the password (of existing accounts) each time a new account is created and applied. or if an account is removed and then apply clicked, or when an account is removed and a new account added then apply clicked

Thanks fixed with this commit.

noblegiant · Apr 25, 2015

I am using this firmware on RT AC68U and my 2.4GHz ssid keeps vanishing and devices getting disconnected frequently though 5GHz is okay. please any help ? thanks

RMerlin · Apr 25, 2015

noblegiant said:
I am using this firmware on RT AC68U and my 2.4GHz ssid keeps vanishing and devices getting disconnected frequently though 5GHz is okay. please any help ? thanks

Try setting a static channel, in case it's automatically switching to a channel that's not supported by your clients (that can happen if you messed with the router's region, for instance).

defcon · Apr 26, 2015

@RMerlin can you take a look at megatools: http://megatools.megous.com/ and see if it can be implemented into smartsync? It'd be badass to have 50gb of encrypted storage synced from http://mega.co.nz

lotek · Apr 26, 2015

noblegiant said:
I am using this firmware on RT AC68U and my 2.4GHz ssid keeps vanishing and devices getting disconnected frequently though 5GHz is okay. please any help ? thanks

test with the follow settings:
1. Wireless-Modus to "N only" & NO "b/g protection"
2. Channels: 40Mhz only or 20MHz only
3. if nothing helps use a static channel

with my nexus 7 tablet (2012) I had the same probs after leaving 374.4xxxx last year...always after some hours or days slow & broken connection....
now I use these settings:

1. Wireless-Modus to "N only" & NO "b/g Schutz"
2. Channels: 40Mhz
all others as standard.....

My router : AC68U

RMerlin · Apr 26, 2015

defcon said:
@RMerlin can you take a look at megatools: http://megatools.megous.com/ and see if it can be implemented into smartsync? It'd be badass to have 50gb of encrypted storage synced from http://mega.co.nz

That's outside the scope of this project. And quite frankly if it were up to me, I would remove Smart Sync.

Sent from my Nexus 9 using Tapatalk

Marsi4eg · Apr 26, 2015

There is an odd issue with print server in 378.52_2, will test on earlier builds

http://www.snbforums.com/threads/wifi-printer-losing-connection.24057/#post-179663

noblegiant · Apr 26, 2015

lotek said:
test with the follow settings:
1. Wireless-Modus to "N only" & NO "b/g Schutz"
2. Channels: 40Mhz only or 20MHz only
3. if nothing helps use a static channel

with my nexus 7 tablet (2012) I had the same probs after leaving 374.4xxxx last year...always after some hours or days slow & broken connection....
now I use these settings:

1. Wireless-Modus to "N only" & NO "b/g Schutz"
2. Channels: 40Mhz
all others as standard.....

My router : AC68U

Thanks man its perfect now setting to static.

noblegiant · Apr 26, 2015

RMerlin said:
Try setting a static channel, in case it's automatically switching to a channel that's not supported by your clients (that can happen if you messed with the router's region, for instance).

Thanks man its perfect now setting to static.

tuntun · Apr 26, 2015

RMerlin said:
Thanks fixed with this commit.

How do we apply this commit or already patched in 52.2?
Thx

Quiptix · Apr 26, 2015

RMerlin said:
That's outside the scope of this project. And quite frankly if it were up to me, I would remove Smart Sync.

Who is using it anyway with all those alternatives around? I would like to see the firmware stripped from any non-routing functionality. A router is not a NAS...

VANT · Apr 26, 2015

Quiptix said:
Who is using it anyway with all those alternatives around? I would like to see the firmware stripped from any non-routing functionality. A router is not a NAS...

Your choice....
For me router is a nas, web serwer, print serwer, cloud etc.
If You don't use it, simple-disable this funcionality or sell advanced router and take one from Your ISP

L&LD · Apr 26, 2015

VANT said:
Your choice....
For me router is a nas, web serwer, print serwer etc.
If You don't use it, simple-disable this funcionality or sell advanced router and take one from Your ISP

To each his / her own, of course. But as soon as you list a different function, it automatically isn't just a router anymore.

VANT · Apr 26, 2015

of course not only router, but companies are developing more and more powerful router not only for routing

RMerlin · Apr 26, 2015

tuntun said:
How do we apply this commit or already patched in 52.2?
Thx

Wait for the next release. This is development code.

Thread starter	Title	Forum	Replies	Date
	Release Asuswrt-Merlin 3004.388.7 is now available	Asuswrt-Merlin	24	Today at 4:11 PM
	Beta Asuswrt-Merlin 3004.388.7 beta is now available	Asuswrt-Merlin	123	Saturday at 1:57 PM
H	Solved xbox one not able to sign in when connected through router running asuswrt-merlin on an rt-ac5300.	Asuswrt-Merlin	5	Apr 12, 2024
	Release Asuswrt-Merlin 386.13 / 386.13_2 is now available for AC models	Asuswrt-Merlin	39	Apr 7, 2024
	Beta Asuswrt-Merlin 386.13 beta is now available for AC models	Asuswrt-Merlin	32	Mar 28, 2024
	asuswrt-merlin.net Website Site Down?	Asuswrt-Merlin	18	Mar 27, 2024
C	Asuswrt-Merlin 3004.388.6 Memory Leak	Asuswrt-Merlin	13	Mar 24, 2024
	Release Asuswrt-Merlin 386.12_6 is now available for AC models	Asuswrt-Merlin	168	Feb 26, 2024
U	Where to start with automatic scripting for AsusWRT-Merlin	Asuswrt-Merlin	11	Feb 22, 2024
L	Does the latest AsusWRT/Merlin FW has a memory leak?	Asuswrt-Merlin	20	Feb 18, 2024

Asuswrt-Merlin 378.52 is available

Asuswrt-Merlin dev

Senior Member

New Around Here

Regular Contributor

Occasional Visitor

Asuswrt-Merlin dev

New Around Here

Asuswrt-Merlin dev

Occasional Visitor

New Around Here

Asuswrt-Merlin dev

Regular Contributor

New Around Here

New Around Here

Occasional Visitor

Occasional Visitor

Very Senior Member

Part of the Furniture

Very Senior Member

Asuswrt-Merlin dev

Similar threads

Similar threads

Sign Up For SNBForums Daily Digest