Recent content by arrow201

>- Password Policy Upgrade – Minimum 10 characters with at least 1 letter, 1 digit and 1 special symbol, and no consecutive identical >characters; hardens defense against brute-force attacks. Anybody upgraded yet? Just to be clear, is the minimum password requirement for admin login, WiFi, or...

I've been running this firmware without any issues for just over a week now. Laptops/desktops/TVs/IOT devices ...have at least 16 devices active at a time. The last version I tried was 45934 but had DLNA issues with my TV. I've had no connection issues with this version, been rock solid so...

Came from 3.0.0.4.386.44266 which runs perfectly. Tried this latest 45934, everything works well except my DLNA devices. My Samsung F8000 connects to the media server on a Synology NAS and a HDHomeRun box via DLNA, it's very slow to load menus/video and will end up quitting/error out the stream...

That's not totally correct. I purchased my AX88, Jan this year, before that, I used an AC87. When I got the AX88: - I first saved the settings from the AC87 - loaded the latest firmware at that time on the AX88, then did a factory reset - restored the AC87 settings into the AX88 Of course, only...

Did you: a) do factory reset after the update and configured manually. b) do factory reset after the update and restored a saved configuration. c) just updated the firmware So far, I've been able to get away with just updating the firmware only. I haven't updated to 8018 yet, but maybe with...

pod3545, you're probably correct. As per my post above, i haven't had any issues thus far, i didn't even do a factory rest. The reason it's working well for me could be, as you said. I only use the basic functions. I have a separate NAS, so i don't use the USB ports, no Game Boost, WPS off, i...

Yes, I always read you have to factory reset, but as Grisu said, try that only if you have issues afterwards. I updated to 7997 a few days ago via the ASUS interface, no factory reset. To be safe, i saved the config and saved a number of the interfaces screenshots first. It was used heavily by...

Before this update, i had version 7968, doing a factory reset afterwards. For this 7997 update, which i installed 2 days ago, i didn't do a factory reset, I just installed the update, then did another reboot. Checked the settings, all appears OK. I run a variety of devices (up to ~20). It was...

Before the AX88U, i had the AC87U (and kept it for backup purposes), it's 5Ghz band wouldn't reach my Amazon devices, so they're on 2.4. When i got the AX88U, I moved almost everything to 5Ghz, but I left my Amazon Echo devices on the 2.4 band, the ASUS app shows 72 Mbps Tx/Rx speed for them...

Sorry if i'm stating the obvious but do you run a "WiFi Analyzer" app from your phone to check your surrounding area? I read it's best use the lower channels (36 up - UNII1 band) if possible, but for me running a analyzer app, saw 2 of my close neighbors taking up channels in this band and some...

Buck, thank you very much for posting your findings. The next firmware I try, i'll keep this in mind and play with enable/disable of the UPnP setting. Thanks !

I have the same problem, but in my case it's with a Samsung F8000 series smart tv. The TV will lose connection (5 Ghz) after some time, my other devices stay connected. I get the same "vanishing and reappearing a few times and then disappear completely, never to return". I'm sticking with 9383...

Bought a Chromecast 2 shortly after it came out and have it on the 5Ghz band, have never had a problem, I don't have a Chromecast Audio so I don't know. Hope you can find ...or someone here has a solution.

ugh ...sorry, ...almost everything except the version :P Using the latest stock 9313 ...but I've never had a problem with the 5 ghz since buying the unit late last year. Im fortunate to get a good one.

Guest Network, AI Protection, QoS, USB (already have a NAS), AiCloud all OFF Channel Bandwidth: 80Mhz Control Channel: 40 (I read its best to have the lowest channel possible, unfortunately, someone near me took 36, but 40 appears to work fine) A couple of static IPs, port forwarding for the...