Recent content by plush19

Dirty flashed my RT-AC86U from 386.5_2 to 386.7 and pretty stable so far, ill have a look at static IP allocations (DHCP) and IPv6 when time allows me. :)

I prefer Mullvad which inst on the list. Regards, Kieran..

Does AGH and Skynet work well together? Regards, Kieran.

AGH web UI working now, Gave the workstation a fresh Linuix install (Kubuntu 20.10 to Fedora WS 35) which included a fresh Firefox install by default Even tried a router reboot and AGH working as it should be. Anyways thanks to @SomeWhereOverTheRainBow for the prompt reply :) Regards, Kieran..

Morning, I cant seem to access the web interface after a reboot and comes up with a dead result when checking its status via SSH, works after sending a start command via SSH. Commands used; /opt/etc/init.d/S99AdGuardHome check /opt/etc/init.d/S99AdGuardHome start Any ideas for...

I'll probably go towards a Raspberry PI 4B 4-8gb with a SATA/M2 module if I go towards the NAS route as a future LAN project!

Afternoon, I've had VLAN support with the Draytek but never used, was hoping to use this facility with the Plume wireless mesh but had no VLAN tagging support and Plume got no interest in implementing this either! Regards, K.

Afternoon, Does Skynet and NextDNS CLI work OK after dirty upgrade from 386.2_2? Regards, K.

Morning & Happy New Year! I'm pretty happy with the RT-AC86U with both radios on low TX (with SSID hidden) - to bypass the Plume mesh. Apologies for the misleading title! In honestly, I'm back from a year and half from a Draytek Vigor - weird experience and faulty IPv6 support (they initially...

Evening all. Any signs of a wired only router with Asuswrt(merlin) support coming sometime in the future? Regards, Plush :)

Personally I'd do a hard reset when using any beta firmware not just dirty, currently I'm using the latest stable with NextCNS CLI and Skynet also DHCPv6-PD - no issues here! https://www.asus.com/support/FAQ/1039078 Regards, Plush,,

920/920 symmetrical internet here, using RT-ac86u with WRT-Merlin 386.3_2 :D

The above issue is now resolved, thanks to all who helped!! :D

Any tips before I start the above procedure and any way to force a /48 prefix if the previous issue reapers? Regards, K.

I also flashed the most recent stock 384 and 386 builds to see if they'll fix the then ongoing issue, probably a bad idea too. I'll will try a WPS hard reset, restore to deafults with the initilise button ticked and then "format JFFS partion on next boot" (in that order)- all woith USB drive...