orbi

First and foremost, I want to express my sincere gratitude for all the incredible work Voxel has done to provide a powerful alternative to the limited stock firmware. I also deeply appreciate the time and effort the community volunteers put into supporting Voxel users—your dedication doesn’t go...

Hi, I am not very technology savvy and went with RBR50 (very first gen orbi I think) when it first came out for my home wifi (stock latest firmware), and been happy with its reliability overall. With a lot more household members and the corresponding devices (connected, wireless devices, home...

I picked up a cheap RBR50v2 which, I have subsequently learned, wasn't working properly - seems like previous user had a go at conversion and got stuck ? Anyway I have dismantled it and have it connected it to my PC via a serial adapter and putty. If possible I would like to convert it to a...

I am unsure what happened. I enabled telnet, did putty, flashed while in recovery and now I get a 404 error when I try to go to 192.168.1.250, same error shows if i try going to the debug page. I confirmed that the router IP changed to .250 after doing cmd-ipconfig, I also pinged it and got ttl...

Hello all, I'm looking for suggestions on configurations to maximize range on my RBK50. I have the usual setup (1 RBR50 and 2 wired RBS50) with the voxel firware (V9.2.5.2.25SF-HW). I'm guessing that the only levers I have to push (apart from moving the satellites around which I tried already)...

Hello, I have an Orbi RBS50 without an Orbi Router here and I don't know if I can make good use of it. FW Version : V2.7.4.24 Board Model ID : RBS50 Board Data : 0002 I am using a Fritzbox 7530 from my ISP. What's the best setup to connect the RBS50 to the Fritzbox? Can...

I am seeking an upgrade for my old Netgear C6300 router, it is pretty outdated in technology (DOCSIS 3.0 instead of 3.1) and on top of that it does not cover all my rooms, so I decided to go into Mesh. I have a pretty petty 3000 sq ft house. I have read several threads here, and I see there are...

Hoping for some suggestions. House is 2500 sqft 1 1/2 story. Orbi sit at the front where the cable comes in. 1st satellite is upstairs about 40 ft away. I have an Engenius ptp bridge set up to connect the 2nd satellite to a building 150ft away which is my office/workshop. The problem is the...

Continuation of Custom firmware build for Orbi RBK50/RBK53 (RBR50, RBS50) v. 9.2.5.2.19SF-HW New version of Voxel custom firmware build: 9.2.5.2.19.1SF-HW. Changes (vs 9.2.5.2.19SF-HW): 1. Toolchain: Go is upgraded 1.17.7->1.17.8. 2. Upgrade dbus to 1.13.22. 3. Upgrade wget to 1.21.3. 4...

Here is the github for AGH. It is for OpenWRT, and my understanding is the Orbi's firmware is modified OpenWRT. My Orbi LBR20 has Voxel Firmware. I can add Entware if needed, as there is no sudo, apt-get, or opkg functions on it currently. I have SSH access via Putty. Anyone know if this is...

Hi, I am used to my previous setup - broadband internet and a pcWRT modem which made it easy to have different groups with different rules. So kids devices had moderate-restricted YouTube, went through OpenDNS, had scheduled calendars regulating access, etc where as IoT device had no rules or...

Hey all, I live in a home that is one floor approximately 2,000 sqft in size (high ceiling) with an approximately 2,000 sqft screened-in pool outside, perpendicular to and on the corner of the house. At the moment, I use an Arris TG1682 modem+router combo to deliver internet, however, it only...

Hi! I'm running Voxel Firmware on my RBR50 w/ Entware. I was wondering if it's possible to redirect all DNS queries to my local server (including those made to Google DNS)?

Two strange things happened today (or maybe in the last couple of days). Yesterday my Mac complained my shared drive got disconnected, but I didn't bother too much since I had the Mac sleeping for a couple of days and I assumed it just got disconnected. Today our power went out, but fortunately...

Hi, I recently updated to the new Merlin Build with AI-mesh new GUI. The problem is that every time I setup my Orbi in Ap mode I can’t get IPs from the DHCP server on my ASUS. The computer I connect right to the ASUS gets an iP & works. I notice all my ORBI devices receive an ip of...

As the topic says. How can I view the current and max sizes of an Orbi 802.11ac's NAT table? My model is the CBR40, but I imagine it's a telnet command that applies to all Orbis. Can't find it in the web GUI, but I suppose it could be hiding from me. Thanks

The new two-node Orbi WiFi 6 Tri-band Mesh System (CBK752) is NETGEAR’s first Orbi Wi-Fi 6 system with a built-in DOCSIS 3.1 cable modem. With each node powered by a single quad-core 1.4GHz processor and six internal antennas, the AX4200 CBK752 kit provides coverage up to 5,000 sq ft and has...

NETGEAR has expanded its Orbi Pro WiFi 6 Mesh System to the Orbi line of wireless products with an AX6000 Wi-Fi system that targets small businesses needing simplified wireless solutions. Initially available in a two-node kit (one router and one satellite), NETGEAR will also be releasing a...

Continuation of https://www.snbforums.com/threads/custom-firmware-build-for-orbi-rbk50-v-2-5-0-42sf-hw.60308/ . . . https://www.snbforums.com/threads/c...50-rbk53-rbr50-rbs50-v-9-2-5-1-19sf-hw.64782/...

The tri-band Orbi LBR20 combines an AC2200 wireless mesh router with a 4G LTE-A Cat 18 modem, a design that can either let customers solely rely on a cellular connection for internet access, or use the 4G LTE-A connection as a back-up/failover service for their primary internet connection. The...