port

Hello! I'm new here and I dont really know if im posting in the right place. Basically I have 2 routers at home one of which I use as an extender. The one I'm using as an extender my pc is connected to it. I need to start a server from my pc and do I need to open the port on the extender router...

Recently my RT-AX86U router failed to connect to the Internet. My setup has an ISP cable modem connected in bridge mode to the Asus router. After some possible lightning in the area, it seems that the WAN and 2.5G ports have completely stopped working. The device boots up and I'm able to connect...

I am sure this kind of question gets asked a lot but I have been reading many different forums/threads/sites and I just cant figure out why Nmap is showing ports 80, 443 & 21 open on my router. I have UPnP & Port Trigger disabled & I only have 1 port forwarded which is for my Plex server. So why...

Hello I am struggling to setup a port forward to my IP security camera, so I can view it in TinyCam Pro app on my phone when out the house etc. I have a Torguard Open VPN client running on my router and everything is behind that VPN tunnel. I don't know how to do NAT where the external port...

Why when the router restarts does the log show a bunch of entries like this: … instead of port #853 (?) ——————————— my setup: (I use DNS-over-TLS — or at least, I thought I did) OVPN …. dhcp-option DNS 9.9.9.9 dhcp-option DNS 149.112.112.112 and DNSdirector is set to “Router” with a...

How does one allow a Non-Root User to Bind to Lower Ports < 1024 in Asuswrt-Merlin? Thank You.

Hi all, i would like to know if there is some way how to setup the WAN port speed to 1G Full Duplex permanently. The port is set to autonegotiation (found via SSH). I was able to figure out how to set the port to 1G Full Duplex but the settings disappeared after while and i would like to...

Hi, I've installed an Asus AC-RT88U at a friend's place al long time ago. My modus operandi when installing routers is to change the standard GUI port for an extra layer of protection. In this case, my friend hasn't noted the portnummer and cannot get into the GUI anymore. A portscanner doesn't...

I have connected on LAN Port 3 of my AC88U Asus Router my Yamaha MusicCast 50 device. I am listening to Internet Radio. Sometimes the Radio stops playing, only after disconnecting and reconnecting the ethernet cable from the LAN port of the router the problem is resolved and I can listen again...

Removed

Hi guys, New here. I have an Asus RT-AC88U connected to the net with 3 pcs and a NAS and a couple phones and tablets in LAN. I have 2 ports forwarded from my NAS to host my website. There are no other ports redirected or forwarded to my knowledge/manually done by me. However today I was going...

Hi guys. Is there a way to monitor the actual throughput on an interface? Thanks.

I've searched in this forum and on the web about this topic but, could not find clear explanation on how to accomplish this task, mainly due to my very limited knowledge on the subject. The final goal is to set up an RT-AC68P router (384.14-2) to connect to the upstream dns servers using an...

Does anyone know how to include the port number when filling in these 2 DNS fields? And if I do include the port numbers, will it actually make use of the port number I add, rather than still defaulting to port 53?

Somehow I can publish MQTT messages from my Raspberry Pi to my own MQTT broker (on the same Raspberry Pi), but not from my router. I'm not sure what's wrong. Who can help? Setup: Mosquitto MQTT server with valid Let's Encrypt certificates on Raspberry Pi on port 8883 Personal domain name...

Hi, This is probably a pretty silly question for those in the know, but here goes: Can IP's close to each other "interfere" with each other in any way? Let's say I have a network where the router's IP is 10.0.0.1 and I need to assign a IP to a device. Does it matter whether I use 10.0.0.2 or...

I find some problems with my internate provider, so that I do complet reinstal my router with nvram cleanup (I hope so). Now, with 384.9 firmware, I could do nothing with ports: I cannot forward ports, cannot access WebIU or SSH from WAN. System even doesn’t response on ping from WAN. But I do...

Is the best way to force users to use the dns server I have set (OpenDns) is by adding this via ssh iptables -t nat -A PREROUTING -i br0 -p udp --dport 53 -j DNAT --to $(nvram get lan_ipaddr) iptables -t nat -A PREROUTING -i br0 -p tcp --dport 53 -j DNAT --to $(nvram get lan_ipaddr) (is that...

My IPv6 connection type is Native, DHCP-PD is enabled and my server has a public IPv6 address. I need to open port 80 for my webserver but I don't know how to define the destination address on my LAN side. The guide https://www.asus.com/us/support/FAQ/1013638/ doesn't show how to bind the local...

Hi, I have found the settings for rules for the device (via static IP). But how can I set VPN only for one port of connection to this IP? For example: 192.168.1.145:7896 I do not want to go all connections from the device through VPN but only on the specific port. Is it possible to do it in...