[ 3006.102.6 alpha Build(s) ] available build(s)

[AceSpace]

BE92U - 3006.102.6_alpha2-g683db26d11
2.4ghz WLC_SCB_DEAUTHORIZE error (-30)
After half an hour, an error appears in the logs and the devices begin to reconnect.

 

[penguin22]

I sometimes see similar in the logs:

Nov 7 15:25:49 RT-BE88U kernel: CFG80211-ERROR) wl_cfg80211_change_station :
Nov 7 15:25:49 RT-BE88U kernel: WLC_SCB_DEAUTHORIZE error (-30)
Nov 7 15:25:49 RT-BE88U kernel: CFG80211-ERROR) wl_cfg80211_del_station :
Nov 7 15:25:49 RT-BE88U kernel: WLC_SCB_DEAUTHENTICATE_FOR_REASON err -30
Nov 7 15:25:49 RT-BE88U kernel: CFG80211-ERROR) wl_cfg80211_change_station :
Nov 7 15:25:49 RT-BE88U kernel: WLC_SCB_DEAUTHORIZE error (-30)

 

[Ripshod]

I've been seeing those too. For quite a while now - certainly in the last release too.
Nothing's actually broken so I don't worry.

 

[penguin22]

I've been seeing those too. For quite a while now - certainly in the last release too.
Nothing's actually broken so I don't worry.

It appears to be primarily IoT clients that don't properly disassociate and lose connection in a non-clean manner.

 

[AceSpace]

It appears to be primarily IoT clients that don't properly disassociate and lose connection in a non-clean manner.

The problem is that after such messages, IoT devices start to constantly lose connection in my case.

 

[CaptainLockness]

I had tried using the stock on my nodes, BE86U and BE82U wired backhaul respectively. I found that the BE82U is fully stable and works well with the current stock firmware (3.0.0.6.102_39099), though the BE86U on current stock (3.0.0.6_102_39112) was unstable with continuous reboots throughout the day, which persisted even after a full reset.

I am now running Alpha 2 on the main BE88U router and Merlin 3006_102.5_0 on the BE86U Mesh node with full stability for what it's worth.

What ive done is downgrade back to Alpha 1 from the old broken version of Alpha 2 and just upgraded to the fixed version of Alpha 2 and everything works again.

Keep in mind the only i have changed is normal network settings and only MerlinAU installed recently for my RT-BE88U.