blades@(none):/tmp/home/root# nvram get clkfreq
1000,666
blades@(none):/tmp/home/root# cat /proc/cpuinfo
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1998.84
processor : 1
BogoMIPS : 1998.84
Features : swp half thumb fastmult edsp
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : Northstar Prototype
Revision : 0000
Serial : 0000000000000000
blades@(none):/tmp/home/root# nvram get bl_version
1.3.0.6
Hi, where does it say the hardware revision? Is it written on the box or on the device? I checked the router last night but couldn't find any info regarding the revision, but I didn't check the box yet.Hi.
I've just got the AC68U and it has the hardware revision E1 (the firmware version is 3.0.0.4.380_3264). Does anyone know if the Merlin works for this revision?
I have both RT-AC68U and DSL-AC68U. I do see revision on RT-AC68U, but not on DSL-AC68U. There might be only one revision for DSL-AC68U.Hmm, mine is a DSL-AC68U, not just a router. I wonder if modem-routers have different HW versions too. There was a white sticker with serial number etc. on the back, but no HW version.
I have two houses. The old house used to have ADSL connection which was not stable(Fiber optic wasn't available), but I had already purchased DSL-AC68U. After I changed the ISP, I didn't want to purchase a new router(the bad part is that DSL version doesn't support Merlin's firmware), so I use LAN port as WAN. The main house is where I put RT-AC68U as main router.BTW, why do you need both dsl and router versions?
Sent from my ASUS_Z00AD using Tapatalk
I see. Thanks [emoji2]I have two houses. The old house used to have ADSL connection which was not stable(Fiber optic wasn't available), but I had already purchased DSL-AC68U. After I changed the ISP, I didn't want to purchase a new router(the bad part is that DSL version doesn't support Merlin's firmware), so I use LAN port as WAN. The main house is where I put RT-AC68U as main router.
It's both on the box and on the back of the device ► H/W ver: E1Hi, where does it say the hardware revision? Is it written on the box or on the device? I checked the router last night but couldn't find any info regarding the revision, but I didn't check the box yet.
I get temps < 50C with a fan with E1 version. As I use OpenVPN a lot, looking forward to overclock this router. But I can't get it work with anything except stock 1000,666 with nvram set clkfreq :-( using latest Merlin 380.65.
Anyone got overclock working for E1, BL 1.3.0.6?
Thank you in advance.
Please, have your router temperature discussion in this thread:My AC68U rev. E1 with 70mm fan have maximum 50C on CPU
Welcome To SNBForums
SNBForums is a community for anyone who wants to learn about or discuss the latest in wireless routers, network storage and the ins and outs of building and maintaining a small network.
If you'd like to post a question, simply register and have at it!
While you're at it, please check out SmallNetBuilder for product reviews and our famous Router Charts, Ranker and plenty more!