I'll start a thread with this router running tomatoUSB firmware.
Here is how to load the tomato firmware.
1. Go to the link below.
2. Download the file 'tomato-K26USB-1.28.RT-N5x-MIPSR2-083V-Mega-VPN.trx' Yes its for the RTN10U but still works for the N66U.
3. Put the router into recovery mode by holding down the reset button in the back of the router and plug the power in. Continue holding the reset button until the power lights blinks slow, then release the reset button.
4. Use the Asus recovery disk and upload the tomato firmware.
5. Wait until it finish, about 5min.
6. Power down the router
7. Power up the router and you now have tomato on it.
Below is the link
http://tomato.groov.pl/index.php?dir=K26RT-N/build5x-083V/RT-N10U
Here is how to load the tomato firmware.
1. Go to the link below.
2. Download the file 'tomato-K26USB-1.28.RT-N5x-MIPSR2-083V-Mega-VPN.trx' Yes its for the RTN10U but still works for the N66U.
3. Put the router into recovery mode by holding down the reset button in the back of the router and plug the power in. Continue holding the reset button until the power lights blinks slow, then release the reset button.
4. Use the Asus recovery disk and upload the tomato firmware.
5. Wait until it finish, about 5min.
6. Power down the router
7. Power up the router and you now have tomato on it.
Below is the link
http://tomato.groov.pl/index.php?dir=K26RT-N/build5x-083V/RT-N10U