Beta Asuswrt-Merlin 386.1 Beta is now available

[swejuggalo]

On Beta2, factory reset.
Log is filling up with this:

Dec 15 10:08:12 kernel: protocol 0800 is buggy, dev eth6
Dec 15 10:08:12 kernel: protocol 0800 is buggy, dev eth7
Dec 15 10:08:16 kernel: protocol 0800 is buggy, dev eth7
Dec 15 10:08:16 kernel: protocol 0800 is buggy, dev eth7
Dec 15 10:08:16 kernel: protocol 0800 is buggy, dev eth7
Dec 15 10:08:16 kernel: protocol 0800 is buggy, dev eth7

Edit: Using RT-AX88U, merlin 386.1 beta 2

Known issue with Asus hardware acceleration. Don't think it actually does anything harmful

 

[Deleted member 22229]

do you have a AiMesh setup? i cannot upgrade my AX3000 (using AX58U firmware) without a factory reset.... since Alpha 3

No Aimesh here. Also have never had any issues upgrading or downgrading firmwares on my AX58U. I also preform a hard factory reset after the flash then reconfigure manually.

 

[heslo]

Updated from beta 1 to beta 2 on my AC88U... no issues here!

 

[modestyB]

Known issue. Shift any guest network/s you may have into the second column on the guest network page, (& delete the first.)

Thank you!
Shifted both 2,4ghz and 5ghz guest networks to second column, and it stopped the erreoneous logging.

But now, the log is filling up with this:
Dec 15 13:05:14 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Dec 15 13:05:14 kernel: br0: port 3(eth3) entered disabled state
Dec 15 13:05:17 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 1000 mbps full duplex
Dec 15 13:05:17 kernel: br0: port 3(eth3) entered listening state
Dec 15 13:05:17 kernel: br0: port 3(eth3) entered listening state
Dec 15 13:05:19 kernel: br0: port 3(eth3) entered learning state
Dec 15 13:05:21 kernel: br0: topology change detected, propagating
Dec 15 13:05:21 kernel: br0: port 3(eth3) entered forwarding state
Dec 15 13:05:21 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Dec 15 13:05:21 kernel: br0: port 3(eth3) entered disabled state

Assume this might also be known/due to hardware accel(?)
(AX88U 386.1 Beta 2)

 

[deathnite]

Would it be wrong to wish for brand new Merlin FW for Christmas???
I know it's one of the things on my list

Would be cool if Merlin added a snowflake animation script. DD-WRT had this (nvram set snow=on).
Script: https://svn.dd-wrt.com/changeset/5365

RT AC 86U on beta 2 View attachment 28502

Same here on AC86U.

 

[dave14305]

Connected to the main SSID

dhcp-option=lan,3,192.168.131.1
dhcp-option=lan,15,131kk.lan
dhcp-option=lan,44,192.168.131.121
dhcp-option=lan,252,"\n"
dhcp-option=dnsf5,option6:23,[2a02:6b8::feed:bad],[2a02:6b8:0:1::feed:bad]
dhcp-option=dnsf6,option6:23,[2a02:6b8::feed:a11],[2a02:6b8:0:1::feed:a11]
dhcp-option=dnsf13,option6:23,[2620:fe::fe],[2620:fe::9]
dhcp-option=dnsf14,option6:23,[2a0d:2a00:1::2],[2a0d:2a00:2::2]
dhcp-option=dnsf15,option6:23,[2a0d:2a00:1::1],[2a0d:2a00:2::1]
dhcp-option=dnsf16,option6:23,[2a0d:2a00:1::],[2a0d:2a00:2::]
dhcp-option=lan,option6:23,[::]
dhcp-option=lan,option6:24,131kk.lan
dhcp-option=br1,3,192.168.101.1
dhcp-option=br2,3,192.168.102.1
dhcp-option=lan,42,192.168.131.1 # ntpMerlin

It doesn’t look like anything is configured in LAN / DHCP Server / DNS 1 & 2.

 

[Mutzli]

do you have a AiMesh setup? i cannot upgrade my AX3000 (using AX58U firmware) without a factory reset.... since Alpha 3

I have an AX3000 in my mesh network and it updated without any issues. Mine is connected over wireless to an AX88U on a 5GHz uplink.

 

[HKJase]

The last 384 release doesn't mean anything. So, when was the last time the router was fully reset? From which firmware to the latest Beta did you flash it from? What router are you talking about?

RT-AC86U, previously 384.19.0.
Haven't done a complete reset since 384.4.

 

[heysoundude]

Would be cool if Merlin added a snowflake animation script. DD-WRT had this (nvram set snow=on).
Script: https://svn.dd-wrt.com/changeset/5365

smh NO. Merlin's a wizard, not a snowman

 

[distilled]

Would be cool if Merlin added a snowflake animation script.

This would provide a boost in speed and security, and decrease attack surface. For an added bonus, it would free up valuable programming time, so RMerlin can focus on the major 386 upgrade.

Hopefully, the next release will also flash the LED lights in sync with the song Jingle Bells.

 

[deathnite]

@distilled great idea, keep them coming, I see you're already getting into the holiday spirit.

smh NO. Merlin's a wizard, not a snowman

If a wizard can't make it snow then he doesn't have any power.
On the other hand, a snowman doesn't make snow, so this is a foolish comparison.
Also, this would be something optional you need to turn on, it wouldn't affect a grinch.

 

[bbunge]

RT-AC86U, previously 384.19.0.
Haven't done a complete reset since 384.4.

Just may be time for that hard factory reset. You can take a backup of the settings and /jffs but I would not restore them after the reset. As a fellow AC86U user, a reset will be worth it. And, format the /jffs after a minimal config.

 

[lucluke]

do you have a AiMesh setup? i cannot upgrade my AX3000 (using AX58U firmware) without a factory reset.... since Alpha 3

Same here on AX3000, router restarts on upgrade and nothing happens.
No AiMesh, basic config with AiProtection and Diversion.

 

[Expose11]

Just may be time for that hard factory reset. You can take a backup of the settings and /jffs but I would not restore them after the reset. As a fellow AC86U user, a reset will be worth it. And, format the /jffs after a minimal config.

Would formatting /jffs be necessary if I don't do anything with scripts and/ or I'm flashing a new router. Just pulled it out of the box?

 

[octopus]

I have runned Beta2 build 1 days 0 hour(s) 40 minute(s) 32 seconds and working just fine on RT-AX86U router.
Vpn-clients seems to run fine, only tested or RT-AX86U.
VPN-speed with AES-256-GCM is 180-210 Mbps SHA1 and no compression.

Thanks for new build(s)
@RMerlin
Octopus

 

[XIII]

Would be cool if Merlin added a snowflake animation script.

Be careful what you ask for...

Potential heat issues (April's Fool on webui)

First, I have to apoligize. People who were worrying about heat issues were right. It seems like that the amount of heat generated by those routers is more problematic than first expected. In the 374.40 release, I changed the way the webui was generated by the router. Unfortunately, looks...

www.snbforums.com

 

[QuikSilver]

smh NO. Merlin's a wizard, not a snowman

This made me chuckle more than it should have...

 

[L&LD]

RT-AC86U, previously 384.19.0.
Haven't done a complete reset since 384.4.

You're well past due for one then. You won't recognize the web when you're through.

L&LD | SmallNetBuilder Forums

 

[JJJM]

Have been using Merlin on a AC68u for years. On that platform have also been running the NordVPN setup without problem using default settings.

Purchased a new AC86u and today updated from stock ASUS firmware and migrated to 386.1 beta 2. Performed factory default resets as recommended and all appeared to go well. Now attempting to again setup VPN using Merlin's OpenVPN Client Settings uploading NordVPN's UDP config file and the VPN appears to install/load flawlessly. Under Service State on the VPN Client tab it states "Connected" with a local and Public IP address listed. BUT - if I go online and request my IP address it still lists my ISP address (Comcast) and at NordVPN's homepage the widget states my "status" as "unprotected". What am I doing wrong or is there a bug?

 

[sturmstar]

Can someone please confirm that Adaptive QOS with default settings (RUNNER=ENABLED) is generally (still) broken in Beta 2 on RT-AX86U?

I observed that with CakeQoS (RUNNER disabled) the Bandwith Monitor is working - but with default Adaptive QoS or even with FlexQoS - only a few kb traffic are shown.

If I manually disable the Runner via "runner disable" I can see that the Bandwith Monitor and FlexQoS are working again and are showing the right amounts - BUT - even if I disable the runner via CLI - after some minutes, or after every change in settings - its enabling again.

I had the same issue with stock firmware 3.0.0.4.384.9318 2020/10/23 (QoS not working) - why I stayed on 3.0.0.4.384.9298 2020/08/18 until Merlin-Beta1.

Has this to do with the stock GPL "drivers" which are used in the firmwares? I'm not nagging - I just want to understand why this is happening.

Thanks for any inputs.