Compatibility Findings with AddOns with GT-BE98 Pro

[ExtremeFiretop]

Installation, configuration, and test e-mails work flawlessly on GT-BE9e Pro.

Good for me! Added to the list!

Thanks @visortgw ! I didn't even need to reboot my network Your a true team player.

 

[bennor]

FYI for addon developers who may have missed @RMerlin's post indicating he is working on additional supported Asus-Merlin 3006.102 routers.
https://www.snbforums.com/threads/we-have-liftoff.94107/#post-947749

For addon developers (like @thelonelycoder ), do make sure that you don't determine if a router is on 3006 based just on its model, but on its actual version, i.e. check the firmver nvram content.

 

[Milan]

I can say that adguard is working fine too

 

[ExtremeFiretop]

I can say that adguard is working fine too

Thanks for the update!

 

[bennor]

An FYI for those who haven't seen the 3006.102_4 alpha post in the Asus-Merlin subforum, several more router models added:

[ 3006.102_4 alpha Build(s) ] available build(s)

https://www.asuswrt-merlin.net/test-builds This Alpha builds gives no support as they are in early state. Report any findings so they can be fixed in next alpha/beta release. 2025-18-03 3006.102_4_alpha2 is out. 2025-25-03 3006.102_4_alpha2 is out-g774261a90a 3006.102.x (xx-xxx-xxxx) -...

www.snbforums.com

- NEW: Added RT-AX86U_PRO, RT-AX88U_PRO, ZenWifi Pro XT12,
GT-AX6000, GT-AXE16000 and GT-AX11000_PRO to the
3006 firmware series.

 

[Viktor Jaep]

An FYI for those who haven't seen the 3006.102_4 alpha post in the Asus-Merlin subforum, several more router models added:

[ 3006.102_4 alpha Build(s) ] available build(s)

https://www.asuswrt-merlin.net/test-builds This Alpha builds gives no support as they are in early state. Report any findings so they can be fixed in next alpha/beta release. 2025-18-03 3006.102_4_alpha2 is out. 2025-25-03 3006.102_4_alpha2 is out-g774261a90a 3006.102.x (xx-xxx-xxxx) -...

www.snbforums.com

FINALLY! Let's go team GT-AX6000!!

 

[elorimer]

Haven't seen it noted, but I would add that @Martineau's fixes for vnstat now make it work reliably for me on the latest firmware for AX88 and AX86Pro. Neither was starting on a reboot because of a problem with the NTP wait loop. I don't think they've been merged yet.

 

[Diveblaster]

So to summarize everything we know so far about the AMTM add-ons on 3006 F/W is below:

--WORKING--
1 - Diversion: Functional on 3006
2 - Skynet: Functional on 3006
5 - scribe: Functional on 3006
7 - unbound Manager: Functional on 3006 (with the develop branch for the WebUI only!)
8 - MerlinAU: Functional on 3006
j1 - connmon: Functional on 3006 (with the develop branch)
vn - vnStat: Functional on 3006
rt - RTRMON: Functional on 3006
j2 - ntpMerlin: Functional on 3006 (with the develop branch)
bm - BACKUPMON: Functional on 3006
j3 - scMerlin: Functional on 3006
j4 - spdMerlin: Functional on 3006 (with the develop branch)
j5 - uiDivStats: Functional on 3006
j6 - uiScribe: Functional on 3006 (with the develop branch)
j7 - YazDHCP: Functional on 3006 (with the develop branch)
vr - Domain-based VPN Routing: Functional on 3006 (WAS able to route VPN traffic in tests!)
ep - Entware: Functional on 3006
em - Email Settings: Functional on 3006
sc - Script Update Notifications: Functional on 3006
dc - Disk Check Script: Functional on 3006
lc - LED control: Functional on 3006
rd - Router Date Keeper: Functional on 3006
vp - VPNMON-R3: Functional on 3006
tm - TAILMON: Functional on 3006
wi - WICENS - WAN IP Change Email Notification Script: Functional on 3006
ag - asuswrt-Merlin-AdGuardHome-Installer: Functional on 3006

--INCOMPATIBLE--
3 - FlexQoS: Incompatible
- LINKS:

FlexQoS - FlexQoS 1.4.4 - Flexible QoS Enhancement Script for Adaptive QoS

can i install flexqos with the official firmware? Thanks

www.snbforums.com

GT-BE98 FW 3.0.0.6.102_34372/Adaptive QoS Broken

Any value entered into upload and download section don’t work. Bye

www.snbforums.com

4 - YazFi: Incompatible (Functionality superseded, by Asus Guest Network Pro.)
- LINKS:

YazFi - YazFi on GT-BE98 Pro

Hey, Just reporting some issues with YazFi not being updated yet for GT-BE98 Pro So far what Ive noticed: 1. Web page inaccessible - because the GT-BE98 Pro uses "Guest Network Pro" and not "Guest Network" page, there is no YazFi tab 2. Missing networks - my GT-BE98 Pro is using wlan slots such...

www.snbforums.com

RT-AX88U Pro Blocking Internet Access

I'd like to block Internet access to some devices connected to the IoT network and Guest network. I am not able to block Internet access to the devices connected to the IoT networks or any network that is not setup to use the main network. Even when using the MAC address in Parental Controls...

www.snbforums.com

6 - x3mRouting: Incompatible? (Unable to route VPN traffic in tests!)
- LINKS:

VPNDirector Source/Destination Port-Based Split-Tunneling Rules Not Possible?

All: I'm in the process of migrating from Asuswrt-Merlin 384 => 388 and noticed VPN Director as an option for VPN Source/Destination Address-Based Split-Tunneling. In Asuswrt-Melrin 384, I configured my Source/Destination Port-Based VPN Split-Tunneling Rules in the nat-start script as follows...

www.snbforums.com

DomainVPNRouting - Domain VPN Routing v3.1.1 ***Release***

***v3.0.2 has been released*** Release Notes: v3.0.2 - 11/05/2024 Enhancements: - Added functionality to query the AdGuardHome log. This can be enabled or disabled via the QUERYADGUARDHOMELOG configuration option. - Created option to enable/disable Domain VPN Routing under configuration menu...

www.snbforums.com

wf - Dual WAN Failover: Incompatible
- LINKS:

Installation and uninstallation seem to hang on GT-BE98 Pro · Issue #27 · Ranger802004/asusmerlin

Hi, Installation and uninstallation seem to hang on GT-BE98 Pro On uninstall it hangs after deleting the script On install it hangs at getting systems settings

github.com

Cannot install · Issue #60 · Ranger802004/asusmerlin

Trying to install wanfailover via AMTM, and I'm seeing the following in my log file.. Its a brand new RT-BE88U router that was only just flashed with Asus Merlin 3006.102.2_2, factory reset, dual W...

github.com

--UNKNOWNS--
wg - WireGuard Session Manager:
Unknown (Any ideas @Martineau ?)

di - dnscrypt installer:
Unknown (Any ideas @SomeWhereOverTheRainBow ?)

km - KILLMON:
Unknown (Any ideas @Viktor Jaep ?)

Hi
Where do I find addonsversions that you refer to the develop branch?
Thx for your work
Dive

 

[ExtremeFiretop]

Hi
Where do I find addonsversions that you refer to the develop branch?
Thx for your work
Dive

You would run the following commands:

/jffs/scripts/spdmerlin develop

/jffs/scripts/connmon develop

/jffs/scripts/ntpmerlin develop

For unbound because it's only the WebUI and there's no update function for just the WebUI, it's a little different:

curl --retry 3 "https://raw.githubusercontent.com/juched78/Unbound-Asuswrt-Merlin/refs/heads/develop/unboundstats_www.asp" -o "/jffs/addons/unbound/unboundstats_www.asp" && chmod 755 "/jffs/addons/unbound/unboundstats_www.asp"

That will replace the file for unbound; but you will still need to reboot the router to mount the new Webpage.

But replacing that file and then rebooting should do the trick.

 

[bennor]

Where do I find addonsversions that you refer to the develop branch?

YazDHCP

/jffs/scripts/YazDHCP develop
/jffs/scripts/YazDHCP forceupdate

connmon:

/jffs/scripts/connmon develop
/jffs/scripts/connmon forceupdate

spdMerlin:

/jffs/scripts/spdmerlin develop
/jffs/scripts/spdmerlin forceupdate

ntpMerlin:

/jffs/scripts/ntpmerlin develop
/jffs/scripts/ntpmerlin forceupdate

 

[Ripshod]

Now the dropdown menus have been sorted scMerlin is on the compatible list

scMerlin - scMerlin 2.5.10 - Service and script control menu for Asuswrt-Merlin, March 2, 2025

Release Notes for scMerlin v2.5.20 version (now available): 1) Fixed "Addons" drop-down menu entries functionality on the left-hand side vertical bar for 3006.102.x F/W versions. N.B. The fix applies only to the 3006 codebase. Some issues were found when testing on the 3004 codebase, so the...

www.snbforums.com

Current state:

 

[iTyPsIDg]

I just upgraded to the RT-AX86U Pro and 3006.102.4. My Addons keep disappearing.

If I restart httpd then force refresh the webpage, they load for about one click, then go back to the above.

Is this a known issue? I tried searching httpd and didn't get anything recent.

 

[ExtremeFiretop]

I just upgraded to the RT-AX86U Pro and 3006.102.4. My Addons keep disappearing.
View attachment 65918
If I restart httpd then force refresh the webpage, they load for about one click, then go back to the above.
View attachment 65919

Is this a known issue? I tried searching httpd and didn't get anything recent.

Try uninstalling and reinstalling scMerlin, otherwise report the issue in that thread for it to be investigated, it's an orphaned add-on and is on life support from the community at this rate.

 

[iTyPsIDg]

Try uninstalling and reinstalling scMerlin, otherwise report the issue in that thread for it to be investigated, it's an orphaned add-on and is on life support from the community at this rate.

Unfortunately, that didn't change anything. As soon as I click any link, the other addons disappear from the list and even the one listed (scMerlin) doesn't map properly. It ends up going to MerlinAU.

Here is everything I have installed along with versions.

 

[ExtremeFiretop]

Unfortunately, that didn't change anything. As soon as I click any link, the other addons disappear from the list and even the one listed (scMerlin) doesn't map properly. It ends up going to MerlinAU.

Here is everything I have installed along with versions.
View attachment 65920

No issues here on the same firmware version, did you try doing a hard refresh of the browser page? Control+F5 Or Incognito mode?
Another thing to try is rebooting the router to remap the .asp files.

 

[visortgw]

No issues here on the same firmware version, did you try doing a hard refresh of the browser page? Control+F5 Or Incognito mode?
Another thing to try is rebooting the router to remap the .asp files.

No issues here either. Try uninstalling/reinstalling ALL addons -- update to develop for connmon and spdMerlin.

 

[Ripshod]

Factory restore and manual rebuild. scMerlin has recently been fixed for 3006 Merlin.
Do you need all those addons? I have all mine installed but only 3-4 active at any one time.
Of the addons we share, most need updating to "develop" versions as described in their relevant threads.

 

[iTyPsIDg]

Factory restore and manual rebuild. scMerlin has recently been fixed for 3006 Merlin.
Do you need all those addons? I have all mine installed but only 3-4 active at any one time.
Of the addons we share, most need updating to "develop" versions as described in their relevant threads.

This was a factory setup. I just replaced my router with the new one out of the box. The first thing I did was flash Merlin and then slowly started setting everything up. I tried uninstalling all the addons that have to be on the develop branch and reinstalling them, but it is still happening. I've also tried rebooting a few times. I try the Shift + click refresh when reloading the webpage. I seem to have to still restart httpd and then use Shift + refresh page.

 

[visortgw]

This was a factory setup. I just replaced my router with the new one out of the box. The first thing I did was flash Merlin and then slowly started setting everything up. I tried uninstalling all the addons that have to be on the develop branch and reinstalling them, but it is still happening. I've also tried rebooting a few times. I try the Shift + click refresh when reloading the webpage. I seem to have to still restart httpd and then use Shift + refresh page.

But you did not uninstall/reinstall ALL addons? That is what I needed to resolve this same issue shortly after transitioning to the GT-BE98 Pro...

 

[ExtremeFiretop]

This was a factory setup. I just replaced my router with the new one out of the box. The first thing I did was flash Merlin and then slowly started setting everything up. I tried uninstalling all the addons that have to be on the develop branch and reinstalling them, but it is still happening. I've also tried rebooting a few times. I try the Shift + click refresh when reloading the webpage. I seem to have to still restart httpd and then use Shift + refresh page.

Run this:

awk '/menuName: "Addons"/ {capturing=1} /\]/ && capturing {print; exit} capturing || index($0, "menuName: \"Addons\"") {print}' /tmp/menuTree.js

Send the output back here.