Slowikowski
Occasional Visitor
Hello!
I am trying my luck here, I know that this is a fairly active community. I went to sleep a few days ago with the internet out because it was storming fairly hard, and I woke up and found that my WiFi has cut itself off.
The radio signal is on, claiming that the signals are able to be put out. But there is no 2.4Ghz or 5Ghz being output. This randomly happened 2 nights ago. I have factory reset the router. So 1. Holding down the reset button for 30 seconds. I have 2. Held the Power button for 30 seconds(this was suggested when I called netgear ) 3. I have reset it within the GUI.
After calling netgear, The person I spoke with said that I would need to pay $50 for a 3 month subscription to their service so that they can fix it. The gentlemen claimed that it was an easy fix and that he needed to update something, then went on and backtracked and claimed he needed to diagnose something, then apply it to all of the devices, and that this was somehow my ISP's fault?
I have tried many things, one of which mentioned above. I have tried to set the firmware back to version 1.0.2.62 to see if the light would appear. No luck. I have tried to change the firmware to Voxel's R7800-V1.0.2.81.1SF, but again no avail with outputting a wifi signal. The rightmost buttons are on. They are white, which from my understanding meaning that the radio signals are available to be turned on.
I have attatched images that prove what I think that the WiFi should be turned on, but the router is recognizing it is off.
Any help would be greatly appreciated.
I am trying my luck here, I know that this is a fairly active community. I went to sleep a few days ago with the internet out because it was storming fairly hard, and I woke up and found that my WiFi has cut itself off.
The radio signal is on, claiming that the signals are able to be put out. But there is no 2.4Ghz or 5Ghz being output. This randomly happened 2 nights ago. I have factory reset the router. So 1. Holding down the reset button for 30 seconds. I have 2. Held the Power button for 30 seconds(this was suggested when I called netgear ) 3. I have reset it within the GUI.
After calling netgear, The person I spoke with said that I would need to pay $50 for a 3 month subscription to their service so that they can fix it. The gentlemen claimed that it was an easy fix and that he needed to update something, then went on and backtracked and claimed he needed to diagnose something, then apply it to all of the devices, and that this was somehow my ISP's fault?
I have tried many things, one of which mentioned above. I have tried to set the firmware back to version 1.0.2.62 to see if the light would appear. No luck. I have tried to change the firmware to Voxel's R7800-V1.0.2.81.1SF, but again no avail with outputting a wifi signal. The rightmost buttons are on. They are white, which from my understanding meaning that the radio signals are available to be turned on.
I have attatched images that prove what I think that the WiFi should be turned on, but the router is recognizing it is off.
Any help would be greatly appreciated.