RT-AC68U V3 DNS issues

[henro72]

Keep getting this rc_service: watchdog 457:notify_rc start_dnsmasq which makes it show up dns_probe_started

here are the logs
Feb 2 12:25:04 rc_service: watchdog 457:notify_rc start_dnsmasq
Feb 2 12:25:09 rc_service: httpd 454:notify_rc restart_wan_if 0
Feb 2 12:25:12 wan: mac clone: [wan0_hwaddr] == [38:1a:5d:a9:72:58]
Feb 2 12:25:17 nat: apply nat rules (/tmp/nat_rules_vlan2_vlan2)
Feb 2 12:25:17 wan: finish adding multi routes
Feb 2 12:25:17 ntp: start NTP update
Feb 2 12:25:16 miniupnpd[6402]: shutting down MiniUPnPd
Feb 2 12:25:17 miniupnpd[8107]: version 1.9 started
Feb 2 12:25:17 miniupnpd[8107]: HTTP listening on port 45549
Feb 2 12:25:17 miniupnpd[8107]: Listening for NAT-PMP/PCP traffic on port 5351
Feb 2 12:25:17 dhcp client: bound 213.238.198.198/255.255.252.0 via 213.238.196.1 for 21600 seconds.
Feb 2 12:25:33 rc_service: watchdog 457:notify_rc start_dnsmasq

 

[bbunge]

Keep getting this rc_service: watchdog 457:notify_rc start_dnsmasq which makes it show up dns_probe_started

here are the logs
Feb 2 12:25:04 rc_service: watchdog 457:notify_rc start_dnsmasq
Feb 2 12:25:09 rc_service: httpd 454:notify_rc restart_wan_if 0
Feb 2 12:25:12 wan: mac clone: [wan0_hwaddr] == [38:1a:5d:a9:72:58]
Feb 2 12:25:17 nat: apply nat rules (/tmp/nat_rules_vlan2_vlan2)
Feb 2 12:25:17 wan: finish adding multi routes
Feb 2 12:25:17 ntp: start NTP update
Feb 2 12:25:16 miniupnpd[6402]: shutting down MiniUPnPd
Feb 2 12:25:17 miniupnpd[8107]: version 1.9 started
Feb 2 12:25:17 miniupnpd[8107]: HTTP listening on port 45549
Feb 2 12:25:17 miniupnpd[8107]: Listening for NAT-PMP/PCP traffic on port 5351
Feb 2 12:25:17 dhcp client: bound 213.238.198.198/255.255.252.0 via 213.238.196.1 for 21600 seconds.
Feb 2 12:25:33 rc_service: watchdog 457:notify_rc start_dnsmasq

Firmware version?

 

[henro72]

Firmware version?

3.0.0.4.386_21647 Ive tried updating and downgrading it btw same issue

 

[henro72]

Bump

 

[henro72]

Bump

 

[L&LD]

In the last month, have you tried a full reset (without using a saved backup config file)?

[Wireless] ASUS router Hard Factory Reset | Official Support | ASUS Global