ipv6

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.
  1. Z

    vpnmgr let OpenVPN support IPv6 connection (No routing)

    Due to the lack of IPv4 public IP address, we hope to use IPv6 to connect OpenVPN to access the intranet. The actual test is available. We only need to modify the protocol proto tcp-server To be amended as follows: proto tcp6-server Can Merlin add it to the management page?
  2. F

    [Q] VPN IPV6 and more

    Hi all. I have some questions about Vpn and IPV6. Actually my confusion is mostly about ipv6. Since 2015 when all the stuff about ipv6 was starting to emerge, i tried to understand how it was going to be handled for new and legacy devices. I didnt understand at that time and i decided to wait to...
  3. U

    IPv6 Native vs Passthrough (2-Router LAN)

    Topology Two ASUS routers: 1st plugged into a modem (w/ WAN aggregation) 2nd plugged into the first router both are in router mode and not set up as an AP One of the reason I opted for this setup is that I liked the idea of having a firewall on the client-router in order to apply some more...
  4. O

    Orbi RBK50 (RBR50 & RBS50) - IPV6 Not Recognized

    I have noticed that IPV6 is no longer functioning on my Orbi. I have tried all Voxel FW versions since .19 without success. Currenly on V9.2.5.2.5SF-HW. IPV6 had been working in the past. I do not think it is directly related to a FW version, but maybe something happened on my router during...
  5. sdh91

    Persistent IPv6 Static Routes???

    I am looking for a way to make some IPv6 routes persistent in my router. Thus far I can add the routes via ssh to the route with a command similar to below. route -A inet6 add 26XX:XXXX:XXXX:XXXX:1000::/68 gw 26XX:XXXX:XXXX:0001::2 dev br0 The only issue I have is after every reboot the...
  6. ekze

    AC66U slow with 6in4 - advise on new router

    I've been struggling with my AC66U (old rev.) speed issues, finally I narrowed it down to IPv6. When I enable 6in4, my speed over ipv4 gets capped at around ~130-150 mbps, and router is lagging like crazy (ICMP 20-30ms, unresponsive web), as soon as I disable IPv6, I get ~700-900 mbps without...
  7. W

    How to configure a local IPv6 address prefix on Asuswrt-Merlin?

    Hi, I would like to configure a static local IPv6 address prefix (as defined by RFC 4193 Unique Local IPv6 Unicast Addresses) on my RT-AC87U router using Asuswrt-Merlin. After looking at the documentation, I cannot find a way to do that. Any idea? I already enabled SSH connection if that is...
  8. W

    How to configure static IPv6 on Asuswrt-Merlin?

    Hi My ISP provides me with a permanent 48 bits IPv6 prefix (e.g.: 2001:1234:5678::/64). I have a fully functional IPv6 connectivity when using DHCP-PD (Prefix Delegation) aka "Native" connection type in my RT-AC87U router using Asuswrt-Merlin. However, I would like to set the prefix...
  9. N

    Dual-Stack Lite tunnel (DS-lite IPv4 over IPv6) Support

    Sorry for poor english. I tried to find ways to enable DS-lite on Asus merlin. And I tried to setup it manualy but "ip6_tunnel" is not found in modules.dep I think odhcp6c supports DS-Lite but I could not find a way to enable it. I found a script for DS-lite in here...
  10. pirx73

    RT-AC68U IPv6 settings if ISP does not provide IPv6 at all

    Hello all Maybe my question is stupid, i apologize if so, but somehow i feel that answer is not that obvious. My ISP does not provide IPv6 at all. Should i keep IPv6 on my router disabled or i should enable it anyway? If i should enable it, then which connection type should i pick?
  11. D

    Netgear R7800 with Voxel firmware ddns client editing help needed

    Netgear R7800 with Voxel latest firmware ddns client editing help needed. In what file is located the dynamic dns http api url via telnet? I would like to manually add ipv6 address as text to api command that router sends to dynamic dns servers within ip update. Because now if i set manually...
  12. M

    IPV6 PUSH PEER INFO AIRVPN AC86U Not working.

    Hi There So I have an AC86U running merlin 384.16 I use Airvpn config However I have found an issue which I have contacted Airvpn about who responded with the message at the bottom of this post. basically when I use the following config option including "Push Peer info" the vpn refuses to...
  13. E

    DNS over TLS - IPv6 Settings

    When using DNS over TLS, with filter set to router, do the DNS setting on the IPv6 page bypass the filter? I have them set to the same values as listed in the the 'DNS-over-TLS Server List' on the WAN page. Currently on the ipv6 page I have the 'Connect to DNS Server automatically' set to...
  14. cdysthe

    Strange IPv6 address as main DNS connected to my Orbi

    Hi, I have IPv6 enabled on my Orbi system. I ran an app that tells me what my current DNS servers are. This is what I get: Primary DNS: fe80::a204:60ff:fe1e:2e5a Secondary DNS: 10.0,0.1 What is that primary address? The secondary I know since that the Orbi's internal IP. The reason I ask...
  15. S

    IPv6 Address Question

    Hello SNB! I'm aware that it's possible for devices to request/have multiple IPv6 addresses, but my lists are getting what I would consider to be excessive? Is this normal operation? Also, what is the advantage/purpose of "Release prefix on exit" under IPv6? Would this help to minimize the...
  16. S

    Dual Stack (IPv6): DNS for IPv6 is not my AC88U

    Hi, I figured out that in my dual-stack environment my Clients get for IPv4 my router's DNS IP but for IPv6 my Client's get the Providers DNS. My expectation would be to also get the router's IPv6 (the local one) for DNS. :/ I Use DHCP-PD and it works so far. Also I set up DoT on WAN settings...
  17. J

    Orange FTTH vs ipv6

    Hello, I know you dont want to introduce full vlan support for good reasons. In Poland we have Orange FTTH service being probably the most popular fiber provider. I managed to get Funbox 3.0 (router with built in ONT) with separate ONT (so i can replace Funbox 3.0 with my RT-AC88U FW 384.15)...
  18. A

    Openvpn leaking IPV6

    Hi, I have a issue with my AX88U. I set up the Openvpn server to: use VPN to access both LAN and WAN advertise DNS to clients no extra custom config. The case is when I connect to the router from a client that has both IPV4 and IPV6... only the IPV4 traffic is routed through the tunnel whereas...
  19. Skeptical.me

    IPv6 & Unbound Problems

    Today I installed Unbound, and enabled IPv6 in my RT-AX88U after installing Merlin 384.15_beta1 1. From a Networking App on my iMac I keep receiving warnings that "DNS resolution is not working" 2. On ipleak.net I see this: 3. Only very few web pages will load, for example Google.com I'm...
  20. E

    RT68U not working with ipv6

    Hello. I have an LTE network right now since I live in a rural area. I've been using AT&T for quite some time and everything has been working great. I've had the need to change to T Mobile but stumbled with a problem using my RT68U. See, my setup is pretty clear...
Top