ipv6

Hello everyone. I am hoping for some help, because this issue has been driving me nuts for a while now. My AX5400 is running on 3.0.0.4.388_22525-gd35b8fe, was on 386-something before. The bug persisted, the only reason I upgraded was in hopes it would magically fix itself. Also, I have recently...

Hey, The fix for this is probably simple but I can't figure it out. I've hooked up the Asus router to my ISP modem with DMZ enabled towards the router. When I turn off the IPv6 firewall in the Asus settings, IPv6 works fine. When it's turned on it stops working. I tried opening port 546 UDP...

Hi all, I need your advice (yet again). For the last 7 years, I have a 200Mb/s internet connection which also provides me with a public fixed IPv4 (an option which basically makes me paying for the double of the price). For the overall same monthly price, the ISP is now offering me a 1GB/s...

I didn't find similar discussion and sorry if I still do not understand IPv6 well. Is it possible to setup VPN Client with IPv6 support and also support setup IPv6 in the LAN? In other words: Task: To get to some privacy by not disclosing real location (Real IP) and get rid of NAT by supporting...

Hi there, just registered as I’m thinking of buying a new router (GT-AX11000 Pro or GT-AXE16000) and I’m not sure how well IPv6 firewall rules are configurable. I need some open ports for my dual stack WAN. As I got it right port forwarding for IPv4 is possible, but is it possible to just create...

I own an Arris s33 modem. I can't find much information on how to see if it supports IPv6.. There doesn't seem to be any options to configure or enable it on the local config page, http://192.168.100.1/ Do modem's actually have anything to do with IPv6? Should I just enable IPv6 inside my...

I noticed that in 388.1 i have two IPv6 configuration entries: The only difference is that "Advanced_IPv61_Content" has this entry: with 2 options. While "regular" IPv6 entry does not have such option. Is this a bug? Why there's two almost similar entries?

Hello all, I'm trying to configure IPv6 DHCP now that my ISP supposedly has started v6 roll-out for their bridged modems. The only instruction they gave was to enable PD and set the PD size to /56. I have found /etc/dhcp6c.conf and understand that this file can be used to alter DHCP6 settings...

Hello, i have an RT-AC87U. On Lan port i have an Xbox which works better when connected via ipv4 and ipv6. Wifi connected i have an Apple TV, which connects to policy rule vpns. When i enable ipv6 on the router the vpn of apple tv do not work properly because of leakage. so i see 3 solutions: 1...

Hello. I use IPV6in4 with Hurricane tunnelbroker. I would like to know if someone is familiar with a way to either a) deny one or more devices on the network use of ipv6in4 or b) enable only specific devices on the network to have use of ipv6in4? Either would work...whichever is easier if...

I have 2 links connected on my AX68U, running in Dual Lan Fail Over setup and works fine on IPv4, but when the primary link is down, the router is unable to get and publish the IPv6 announced by secondary link. Both links announce properly the IPv6 through PPP when using the primary link. I...

I'm pretty much a noob when it comes to home networking and such. I've recently set up an AiMesh network using an AX86U as my main router. I first seen the issue of IPv6 on my gaming console; but now, I've been more aware of it on my router. I googled and found out my ISP doesn't utilize...

It looks like it's been this way forever, but why does DNSFilter use the mangle table to drop IPv6 traffic? Generally, the mangle table is only for mangling packet headers, not dropping them. Seems this would be better suited for the filter table. Probably a moot point with newer routers...

Upstream router address is updated every 3 days by ISP. After that, native mode WAN is successfully configured by SLAAC, but the Asus router didn't send a new DHCP-PD request. Upstream router's RA server M and O options are set. Need a 'service restart_"wan_if 0"' to fix it.

My ISP provides a native IPv6 connection. I also use Asuswrt-Merlin's VPN client with VPN Director. However, when enabling the VPN client, only the IPv4 address is changed and the IPv6 address is leaked. This is expected as the Asuswrt-Merlin VPN client doesn't support IPv6. I would like the...

Hi team, I am using the Dual WAN feature on my network (AX68U + AC68U) and I am not being able to set a working IPv6 setup for both WANs, please, is there any way to fix a IPv6 setting per connection? Thanks a lot and regards

Hi all, I am running ASUS-WRT Merlin, version 386.7 on my ASUS-RT-AX86U. My internet provider supports full dual-stack IPv6 and I have activated IPv6 on the router. Everything works fine. I have tested this at https://test-ipv6.com. When I turn on my VPN client, (Mullvad), The IPv4 traffic...

Hey all, Does anyone here from the U.S have Spectrum with an Asus router? I was curious what the correct settings were for IPV6? On the routers I've configured in the past, usually I've set it to dynamic and Dual stack. Asus has more options than I'm used to in certain areas. I have only...

In this thread I am attempting to list my various settings with the hopes of either confirming this is the right set up, or discovering where I might have messed something up. The goal here is to have a primary and backup Pihole, running unbound that will filter all dns traffic via IPv4 and...

Here is my problem, I run a couple local ipv6 services on my lan, and I have a prefix that is dynamic via dhcp. Every time the prefix changes, I need to update several config files and I don't always notice right away which impacts other things. As I understand it fd00:: or fc00:: were at some...