mac

Just noticed that a device I have manually assigned in the Manually Assigned IP around the DHCP list isn't using the assigned IP, even though MAC address is right... Looked at assigned DHCP IP addresses under system log and noticed this one device on "wrong" IP-address compared to what I have...

Hi All, I have an AC-86U which has been running happily on my 1Gb up/down FTTP service for a couple of years using PPPoE. My ISP recently informed me that they've switched to DHCP, and will be turning off PPPoE next month. No big deal I thought. So I went into the WAN settings and changed...

Hello! I am upgrading my RT-AC68U router to RT-AX88U Pro. Merlin 388.2.2. Saved settings on RT-AC68U and restored on RT-AX88U Pro. Lost: 1. Login and password for Internet access. 2. Routing for the OpenVPN (Allowed Clients -> Common Name(CN), Subnet, Mask). 3. MAC filter list. 4. Manually...

Hi guys, I'm trying to setup SSH via Mac/Terminal. I've followed this guide: http://tomatousb.org/forum/t-619135/guide-using-ssh-on-tomato-without-passwords-win-mac But when I try to connect via terminal it just says: ssh: connect to host 192.168.1.1 port 22: Operation timed out Any...

I tried to fool my router yesterday. I thought the only thing how the router/switch is identify the hosts is the MAC Address but there must be something else. The scenario was: I connected a PC with my Router at Home. Now i went in the configurations of the router and set for this PC the...

Hi everybody! I have the RT-AC87U with the Merlin Build 384.11_2. But I hace a strange IP : It's the mac of the Wifi 5G : It's normal ?

I have a bunch of home automation clients on 2.4Ghz I have AiMesh with AC-RT5300 and 2 x AC-RT68U nodes (all running 3.0.0.4.384_32799-gfe72567) I have a bunch of clients (particularly LIFX bulbs, though I'm not yet convinced they are the problem) that are not connecting to the router/node with...

Hi, I have a DS1517+ with 4 WD Red 5TB drives in SHR. I have a direct ethernet connection between the NAS and my Mac Pro (Gigabit Ethernet) which is responsible for streaming my movies. I have a direct connection so my streaming does not stress my network/router double (once from the NAS to...

I'm a novice at routers. I bought this router based upon reviews and the fact that they advertise that you can use if for Mac Time Machine backups. I've contact ASUS and while they are very nice - they're not at all helpful. They don't seem to grasp the nature of the problem. I have two...

Hi, I have an ASUS RT-AC1750 B1 router with recent ASUS firmware installed. I hooked up a WD Elements 4TB external hard drive to use as a network drive, which is formatted for Apple/Mac. It is plugged into the router's USB 3.0 port. Everything works fine except that the hard drive will not...

So I'm currently troubleshooting my ISP's proprietary router (which I believe is built around a Cisco ME 4600, I found that the CLI commands are similar) due to a problem with the 2.4GHz signal, which stops responding after a few days. After trying everything (different channels, SSIDs etc) I'm...

Hello all, Please forgive the question if it's been answered elsewhere. Copious searching has not yielded an answer yet. I've got 2 RT-AC3200 routers, both running 380.62_2. One is in "Wireless Router" mode and hooked up to one part of the network. The other is in "Media Bridge" mode and...

Is it possible to randomize the MAC address of the router ?

Hello all, I have stumbled upong a peculiar issue, for the second time and same circustances. I have an Asus RT-AC68P with Merlin firmware 380.66_4; when I get in the Statistics Page of the Traffic Analyzer the Names of the Clients are shown as their MACs. In the LAN - DHCP Server page the...

Hi all, I have an AC87U router which distributes WiFi at the office. MacOS Sierra, Asus FW 378.55 AsusWRT-Merlin. Printer Konica-Minolta Bizhub 224e. The WAN ethernet port of the router is wired to an ethernet switch, where also a Konica Minolta laser printer is connected through ethernet...

Hi, for those of you who would like to setup a VPN to their home networks but loathe the complexity that usually comes with it: Take a look at HomeTunnel - maybe even one of the SmallNetBuilder staff would like to test it? There is also a current Kickstarter campaign where you can get one of...

I'm trying to intercept a click on Amazon Dash buttons to execute a script in my home automation controller, but I can't seem to get the jffs-part of it to work. I followed the short guide from here, like this: I've created two files on my computer dnsmasq.conf.add...