netgear

Hi, I've posted this across multiple different internet forums but had no luck and am hoping for different results here at SNB. Basically I have Verizon Fios with their given CR1000B router, and from that, I have both the coax port going through a splitter (2.5 GHz 5-2500 MHz rated but no...

I have an idea to write something (script/app) that works entirely w/out internet connection (i.e. modem powered off, but with the router working fine; so all LAN devices can still talk to each other, there's just no WAN), and will check the modems status every X amount of time, say every 5 or...

I am unsure what happened. I enabled telnet, did putty, flashed while in recovery and now I get a 404 error when I try to go to 192.168.1.250, same error shows if i try going to the debug page. I confirmed that the router IP changed to .250 after doing cmd-ipconfig, I also pinged it and got ttl...

I have Spectrum 300 Mbps service via my Netgear CM600 cable modem. The modem is connected to an Asus RT-AC88U wireless router. There is no internet connectivity via WI-FI from the router. The RT-AC88U's WAN indicator is red for "No IP or no physical connection". If I connected a PC to the modem...

I have a Netgate 1100 internet gateway. One of its ports is connected with a GS108PEv3, which powers three EnGenius WiFi access points and has a downstream GS108T connected to it. I cannot get connectivity on the configured port of the GS108T with a particular VLAN in use on the rest of my...

https://www.bleepingcomputer.com/news/security/netgear-warns-users-to-patch-recently-fixed-wifi-router-bug/

I am seeking an upgrade for my old Netgear C6300 router, it is pretty outdated in technology (DOCSIS 3.0 instead of 3.1) and on top of that it does not cover all my rooms, so I decided to go into Mesh. I have a pretty petty 3000 sq ft house. I have read several threads here, and I see there are...

Hello and Good day. Need some assistance with my current setup. I want to be able to browse both subnets in my home network. I currently have 2 ISP - sparklight cable 1gb and Century link dsl 80mb connections. How would i go about setting this. First network is Sparklight , modem connected...

We use custom firmware from Voxel. How can I set the wireguard client listen port to a specific port?

I recently picked up this switch for 2.5Gb fiber internet and 2.5Gb Wifi 6 APs.

Anyone using Suricata on their Voxel-Netgear router (with Entware)? https://suricata.io

NETGEAR has announced the Nighthawk RAXE300 Tri-band WiFi 6E Router. It supports 8 WiFi streams (two streams of 6GHz, four streams of 5GHz, and two streams of 2.4GHz) . It also sports a 2.5 GbE multi-Gig port that is switchable between WAN and LAN, plus dual-port Link aggregation. The Nighthawk...

How's it going folks. I was wondering if you could provide any recommendations as for the next step to take with this problem: When setting up my Google home devices (4 cameras, TV, Hub, Doorbell, 2 speakers) my Wifi signal tanked and began to oscillate. (See attached). It continued to do this...

I have an Xfinity XB7 gateway with wireless turned off, so it functions as my router. The 2.5GbE port goes to a TP-Link unmanaged switch with 2.5GbE ports. I have ActionTec ECB7250’s at three points in my home including coming out of the initial switch, and I have another in my office with the...

NETGEAR today announced the availability of the WAX202 and WAX206 desktop WiFi 6 Access Points. The WAX202 supports two streams on each band, while the WAX206 supports four streams. Both support up to three separate wireless sub-networks each with dedicated SSIDs, WPA3 and have a DHCP NAT...

Recently I noticed an increase of about 50ms in ping to WAN addresses. Connected direct to a cable modem ping rates are normal for my geographic area. Going through the router, basic configuration, no Qos, etc., the latency is 50ms more. This just started happening. I have changed routers...

https://www.netgear.com/media/RAXE500_tcm148-116580.pdf Due for release in March 2021 @ $599.99

Here’s a summary of NETGEAR consumer and business products announcements from this year’s virtual Consumer Electronic Show: 4G/5G: Nighthawk 4G LTE WiFi 6 Router (LAX20) – With a built 4G LTE modem, the LAX20 is certified for carriers like AT&T and T-Mobile who serve customers in hard-to-reach...

SOLD - SOLD - SOLD I have several network items that I am putting up for sale. I has a stroke a few months back so now my son is managing my network for me. He installed a new Eero Wifi 6 Mesh system and was going to throw all of my stuff out... My loss is your gain! SOLD... FOR SALE: 1...

During NG firmware script patching research I've realized that stock busybox/sed tool has a bug - the insert command doesn't work properly. Here is a test: # printf "1\n3" | /bin/sed '/3/i 2' | hexdump -C The buggy output is: 00000000 31 0a 32 01 33 |1.2.3| And the expected output is: 00000000...