route

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.
  1. S

    Route only a specific device through VPN

    Hello! I set up a VPN client (NordVPN) in my Asus router. It works fine, however it affects all internet traffic when I turn it on. But how can I configure my ASUS router to only route the traffic of one specific local device (e.g. a mobile phone with a fixed local IP address) through that VPN...
  2. sdh91

    Persistent IPv6 Static Routes???

    I am looking for a way to make some IPv6 routes persistent in my router. Thus far I can add the routes via ssh to the route with a command similar to below. route -A inet6 add 26XX:XXXX:XXXX:XXXX:1000::/68 gw 26XX:XXXX:XXXX:0001::2 dev br0 The only issue I have is after every reboot the...
  3. H

    LAN - Route

    hi, I have a smart switch on which I have several VLANs, including ACL rules. ASUS router RT-AC66U-B1 with the latest version of merlin FW is connected to VLAN10. In the router RT-AC66U-B1 on the LAN - Route tab I have set routing rules for individual VLANs. In the switch I have set the traffic...
  4. sdh91

    IPv6 Static Route

    Could someone help me with the syntax on how to add a static route for IPv6? I need to add a static route to a routerB below my ASUS router for IPv6, I have tried to do it but I'm not getting the syntax correct. This is what I have so far. route -A inet6 add fdc5:6e16:2f48:4864::/64...
  5. owiecc

    Routing router through VPN and the rest through WAN

    I am trying to setup my router (AX88) so that the traffic from the router (transmission) goes through VPN and the rest of the devices go through WAN. If I set Redirect Internet traffic to all the router goes through VPN. I am checking by testing the external IP: curl ipinfo.io/ip When I use...
  6. B

    384.13: Issue with route automatically generated for OpenVPN client

    I am running an OpenVPN server with client config files for each client (clients are routers of my parents with networks behind them). These configs have IP addresses assigned to each common name. On previous versions of the firmware, the real client IP addresses were taken into account when...
  7. octopus

    Need som help with vpn-ip number order

    Need som help/suggestions to get this working. I use this script to monitor endpoint vpn-ipnumber. I have two vpn-clients running, 1 and 3 and depending how it starts up I get display 1/ 2 in defferent order. Also is doesn't matter if I use ovpnc1 or 3 I get same result in both way. I wan't to...
  8. M

    Reroute dropped packets

    Packets to be dropped seem to end in filter INPUT to be discarded by the default drop rule, how to redirect them to a LAN ip to act as a catchall? Could save some trouble every time a service changes ports, it's an outwards facing box anyway so receiving unwanted traffic is no problem, or to run...
  9. jimosity

    Static route to 192.168.2.x device from 192.168.1.x

    I'm using an Asus RT-AC3200 with Merlin 384.5_beta2 firmware. My network consists of a ton of 192.168.1.x devices - some static, some dynamic. I *really* don't want to change anything on that network as some of these devices are a real pain to change. I have one specific device that I use on a...
  10. Wolfschiesst

    Routing question: How to reach Media Bridge via Access Point from LAN

    Dear Merlin-community, i have a setup constisting of 3 Asuswrt-Merlin driven Asus WLAN routers in my local home LAN. LAN-Topology: ------------------- 1. floor ---------------------------------------------------- + PC | | (1 GBit LAN cable) | + RT-AC88U (Main Router connected to Speedport...
  11. N

    VPN Client on Official FW - Route Specific MAC\IP

    I setup a VPN client on the router and I understand that all connected devices connected to the router will go via the VPN How can I setup so that only certain MAC or IP on my network connect to the VPN while others go straight through the internet. Any way I can configure this? Using...
  12. T

    Force all devices through VPN (without individual apps/software)

    I have been able to download openvpn software on desktops and phones, and all successfully run through the ac88u as a server. What I cannot figure out is how to run the router so that all devices can connect to it as clients of the openvpn. So for example, items such as smart tv's and fire tv...
  13. N

    Port forward back to wan interface, RT-N66U

    Heey guys, I have some shirtty setup atm. Let me explain. I have a server running which is directly connected to the modem. on the router, which is also connected to the modem, I have script running which automatically sends a WOL when there is traffic for the server ip. So in order to have the...
Top