[ 3006.102.6 alpha Build(s) ] available build(s)

[Katana1074]

Updated builds have been uploaded, with the correct dongle firmwares.

Still Unable to update, RT-BE86U_3006_102.6_alpha2-ga8ef129b33 from 3006.102.6_alpha1-g5507234591

 

[Ripshod]

Updated builds have been uploaded, with the correct dongle firmwares.

Just to confirm, that's a fix for me

 

[JakoPako]

Updated builds have been uploaded, with the correct dongle firmwares.

Thank you for your work - RT-BE88U now OK

 

[RMerlin]

Still Unable to update, RT-BE86U_3006_102.6_alpha2-ga8ef129b33 from 3006.102.6_alpha1-g5507234591

The issue is on your end, not with the firmware.

 

[Katana1074]

The issue is on your end, not with the firmware.

will try and reflash.....

 

[Katana1074]

Tried to reflash and it's having none of it, will try again tomorrow, Thank you for the support....

 

[jksmurf]

Tried to reflash and it's having none of it, will try again tomorrow, Thank you for the support....

With blurry eyes from too many hours configuring stuff I have made the mistake of downloading the FW below or above the correct one and being for another model, did not update… if you have 100% checked that, try a router reboot (power off, remove the USB drive!), finally if that does not work, hard reset then try it?

 

[X3wKNkGk]

Still Unable to update, RT-BE86U_3006_102.6_alpha2-ga8ef129b33 from 3006.102.6_alpha1-g5507234591

Same here...
I tried to upgrade to RT-BE86U_3006_102.6_alpha2-ga8ef129b33 from 3006.102.5 with webui, hnd-write and restoration utility
for web ui, it was just done nothing after it restarted
for hnd-write, it was like to be soft-bricked, which it couldn't start (i notice the power led indicator blinks after a period of time and i assume it to be keep restarting itself under the hood)
for restoration utility, it responded with failure by chance as opposed to a smooth flash with 3006.102.5

all usb dongle were all removed for the above steps